Amazing that this company totally forgot to tell you how to adjust their nozzles! Sad
@Krain2 күн бұрын
It's as easy as using your fingers to turn! Our nozzles do not require a adjustment key.
@smalltownbbq6007 күн бұрын
My gears are broken after trying to adjust
@Krain6 күн бұрын
The gears should not break on adjustment, please return to the store you purchased.
@Noahcastaneda886210 күн бұрын
Seems like a help for our zone 9
@gergelyszabo922510 күн бұрын
Use I indoor controller hooded place in the garden?
@Anna-ww4pv25 күн бұрын
I need a nozzle that can spray 15 ft @ 180 degrees while spraying from 3-10 feet on the other side so, I don’t have to add more zones.
@Krain2 күн бұрын
I will send your feedback to the engineers.
@jhost0311Ай бұрын
How do you make it go 360deg? This is very confusing and it doesn’t seem to work.
@KrainАй бұрын
Insert K-Key or flat blade screwdriver into Arc Set Adjustment slot. Turn clockwise to increase the arc or counter-clockwise to decrease the arc.
@sohelmallik0891Ай бұрын
I have a k rain 4 inch pro s pop up, which i want to swap the nozzle with the k rain fully adjustable pro nozzles , the red ones with the max throwing distance, how do i swap out the existing nozzle and put in the new one before putting it in the ground?
@KrainАй бұрын
1. Pull up the sprinkler stem by hand. 2. Remove the old nozzle and filter screen. 3. Insert new filter screen and screw on a new nozzle with proper pattern and throw distance. 4. Activate the sprinkler zone and adjust spray direction and pattern, following directions on the nozzle package. 5. Adjust the watering direction correctly. 6. Adjust the spray distance.
@dianneminukas85152 ай бұрын
I want to change mine to every day. How do I do that.
@KrainАй бұрын
You will create a custom watering day schedule. 1. Use the PROGRAM SELECT BUTTON to select the program (A, B or C) you wish to assign watering days. 2. Turn the dial to SET WATERING DAYS. “MON ON” should appear in the display. 3. Press the DOWN or UP buttons to enable (ON) or disable (OFF) day of the week operation. 4. Press the NEXT button to advance to the next day of the week. Repeat steps 3 and 4 until all days of the week have been set. 5. Return the dial to AUTO full manual is at: www.krain.com/content/files/images/landingpages/irrigation%20controllers/pro%20lc/pro-lc%20wifi%20instruction%20manual-english.pdf
@ksomkar2 ай бұрын
How to adjust the spray distance to less than 3 feet? The minimum the green one can do is around 8 feet
@Krain2 ай бұрын
That is the shortest distance. It does not adjust to 3'.
@CalebB-om7fn2 ай бұрын
I have one of those
@KrainАй бұрын
awesome! thanks for sharing.
@rikityrik2 ай бұрын
Is the nozzle screw turned right to shorten spray distance and left to increase?
@Krain2 ай бұрын
Hello, no, the nozzle screw is used to break up the stream. You can access the full instructions on our website: www.krain.com/content/files/images/landingpages/rotors/k2%20pro/k2%20pro%20instructions.pdf
@rikityrik2 ай бұрын
@@Krain thank you for the reply, I will check this out.👍🙂
@lblerg3 ай бұрын
Set left stop - Immediate click Set Right stop - Immediate click Set pattern - Just goes 360 no matter what. Did they have a bad batch? All of mine are like this and will not twist to adjust.
@Krain2 ай бұрын
When set to full circle/360° rotation, the head will turn clockwise continuously. www.krain.com/content/files/images/landingpages/rotors/k2%20pro/k2%20pro%20instructions.pdf
@philipniosi25153 ай бұрын
How do you set the left? Stop and right stop on the sprinkler.
@Krain2 ай бұрын
1. Finding The Left Start Position Using the palm of your hand, twist the Nozzle Turret (K) all the way to the right, then all the way to the left until it stops. Notice the position of the Nozzle Arrow (C). This is the Fixed Left Start Position (M). The sprinkler will begin spraying from this position and rotate clockwise until it reaches its Right Adjustable Stop (N). 2. Changing The Left Start Position Insert tip of the K-key (A) into the Pull Up Slot (F) and turn ¼ turn to prevent the key from slipping out. Then, firmly pull up the entire spring loaded riser assembly, trying not to accidentally turn the Nozzle Turret (K). To change the Fixed Left Start Position (M), turn the Lower Riser (L) any direction necessary to aim the Nozzle Arrow (C) to the desired left start position. There is plastic ratchet at the base of the riser and a “clicking” sound will be made while turning. The top Nozzle Turret (K) section of the riser is not what is turned to adjust the left stop. However, it manually turned to make sure the Nozzle Arrow (C) is all the way to the left fixed side. 3. Changing The Right Stop Position Insert the K-key (A) or medium flat blade screwdriver into the Arc Set Adjustment (E) slot. Turn clockwise to make the arc larger and counterclockwise to make the arc smaller. The arrow at the end of the Arc Adjustment slot will point at the degrees of a circle the head is set to rotate - indicated by the 360, 90 and 180 printed on the top of the head. When set to full circle/360° rotation, the head will turn clockwise continuously Full instructions with diaghram located: www.krain.com/content/files/images/landingpages/rotors/k2%20pro/k2%20pro%20instructions.pdf
@glennlancaster10833 ай бұрын
Would you send something me where I can draw out my yard?
@Krain3 ай бұрын
We don't have a specific template. Are you looking for graph paper?
@benholman84443 ай бұрын
The riser does not turn. Help!
@Krain2 ай бұрын
If your sprinkler isn't turning properly, try cleaning the filter. If sand or debris gets into the rotors gear drive it will wear out prematurely and at this point the entire head will need to be replaced.
@benholman84442 ай бұрын
@@Krain this one is brand new. The only way I could get it aimed was to take it apart and put it back together aimed in the right direction. Even out of the ground and attached to nothing, it is impossible to lift it high enough to turn.
@user-wy5lf6bf8b3 ай бұрын
A cuantos volts trabaja? Los volts con AC o DC?
@Krain3 ай бұрын
24V AC but there is a 7011-9VDC option available
@TheYooToob20004 ай бұрын
I have K-Rain Pros. When I try to adjust the left start the riser doesn’t seem to turn freely. If I really crank it it will turn but it doesn’t seem right. Almost like I’m turning the whole sprinkler and not just adjusting it. Am I missing something?
I remember the Dial-A-Nozzle. That is by far my favorite rotor K-Rain ever designed. I still have one that’s new to this day! I also have this K-5 select and like it very much! 😊
@Krain4 ай бұрын
that's great! oh the memories!
@cristinastaicu61154 ай бұрын
😂🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@jessicaparker3744 ай бұрын
How do I just start my K rain irrigation system manually? I turned it to auto and then pressed manual but nothing happened. We have an irrigation program set up to go on MWF at 6 am but occasionally need to turn it on to wash in the pesticide or other lawncare chemicals.
@Krain4 ай бұрын
On page 10 of the instruction manual, are the instructions. www.krain.com/content/files/images/landingpages/irrigation%20controllers/pro%20lc/pro-lc%20wifi%20instruction%20manual-english.pdf I copied and pasted a brief set here: When only a single station operation is needed, the user can manually start a specific station. 1. Use the PROGRAM SELECT BUTTON to select the program (A, B or C) that contains the station you wish to manually operate. 2. Turn the dial to RUN SINGLE STATION. Display shows selected program and word “SINGLE.” Press NEXT to enter single station operation. 3. Press UP or DOWN to select desired station. 4. Press MANUAL START to begin station operation
@jessicaparker3744 ай бұрын
@@Krain Thanks! I did that and it didn't start. I did push all the other arrows and it did start though!
@AAtta-32864 ай бұрын
If anyone from K Rain reads these comments, I have a question concerning the distance thrown for the 1000 series green adjustable nozzles. This video states the 1000 series can spray as low as 8 ft yet other videos state 13ft. I have a long stretch on the side of my home and need a 10-11ft throw before hitting my neighbor's property. Can I really adjust the 1000 green series to 8ft? Many thanks to ANYONE who can give me some information
@Krain4 ай бұрын
Hello! The models that are RN100-90-210, RN100-210-270, RN100-FIX360 are 8-15 ft. The model that is fully adjustable RN100-ADJ is 13-15'.
@OGRH4 ай бұрын
So y'all know how it works, but you still put out products that don't work very well! Tell me I'm a liar! I've got such a bone to pick with you!!! It's like you just accepted the L in the industry!
@Krain4 ай бұрын
Which product are you having an issue with?
@OGRH4 ай бұрын
@@Krain rotors... how is a technician supposed to move through a property when the sprinkler will get nowhere close to where you move it when checking the left and right adjustments? It always arcs way past wear it looks like it's going to stop when manually moving it... but I have to sit there for 15 minutes for each head because they move so slowly... if I try to get it close and it automatically wants to go back the other way... don't even get me started on the timers!!! I'm talking about the heads that include the key straped to them... it's like you have no interest in the world of technicians. Your timers last forever which is great but your homeowners don't know how to use them!!!! Flip 17 switches For simple, testing programming, etc... and it's almost like you just trying to torture us because they're gonna have to call us if anything goes wrong... your products are clunky and sad... and they will last to stick around and torture you... just remember other companies make products that last too!
@OGRH4 ай бұрын
@@Krain if you made K-flex good job. That's a good product, but I have a feeling you're gonna bust my bubble on that one... I gave somebody grief when they told me they used that stuff because it was called K flex They assured me it had nothing to do with you...
@OGRH4 ай бұрын
Toro actually makes products that I don't love but I would recommend them to somebody on a hard budget if that product was what they picked up... that is saying a lot... Toro needs to stick to tractors... This is not a loyalty thing. I do not believe in brand loyalty I believe in capitalism... what I'm wondering is what's going on with you guys?!? do you not want to participate or are you just comfortable making what you're making? Or is a sister Company making enough to where It just doesn't matter? in that case it's not capitalism... it's corporatism and are just looking out for stockholders over everything else. No company I want to deal with, even if the better product is doing the same thing... sad really.
@Krain4 ай бұрын
@@OGRH If you send us your contact details, I will have a representative contact you.
@OGRH4 ай бұрын
😂😂😂 K-rain... that ish no pro will touch!!! It's not about fancy videos amigos... It's about the products! I would say more, but I don't think you are very constructive with constructive criticism! I wouldn't be surprised if you just deleted this comment and you probably will! The only thing you're good at is copying Hunter's design for PGP sprinklers, exactly! Otherwise bye Felicia!!! no real irrigator would disagree with me who actually has pride in their experience!!!
@Krain4 ай бұрын
We appreciate all feedback. Is there a certain product issue? Did you experience an issue with rotor? a spray? a controller?
@OGRH4 ай бұрын
@@Krain I told you on my other post, the controller and the sprayer...
@Krain4 ай бұрын
@@OGRH Thank you for editing your first response to clarify!
@cliprbacker134 ай бұрын
I have these sprinklers and they work great! Not sure why everyone is so upset in the comments? All you need is a flat head screwdriver driver and the ability to unscrew the riser/turret from the can.
@Krain4 ай бұрын
Thanks for the feedback!
@treesnaforest4 ай бұрын
the k-rain device never connects to the free app; even the installer couldn't get it working
I’m sure glad I found this, I never would have figured this out on my own. I had to purchase the keys from Amazon too.
@Krain4 ай бұрын
Glad it helped!
@rickcormier91605 ай бұрын
Great! I bought a 4 pack to fix some leakers and one that is spraying more than 180 degrees with no instructions to fix.
@Krain5 ай бұрын
Rick, you can find the instructions on the website. Here is a direct link to the pdf: www.krain.com/content/files/images/landingpages/rotors/k2%20pro/k2%20pro%20instructions.pdf
@douglaspalmeri30675 ай бұрын
Really so helpful ! Thanks so much !
@Krain4 ай бұрын
You are so welcome!
@SoySlayer-im7fd5 ай бұрын
K rain blows. I'm a contactor and k rain is booty cheeks
@Jason_Stephens6 ай бұрын
That's it just force the bottom if it does not turn until it breaks.
My Krain doesn't look like that. Must be an outdated vudeo
@Krain7 ай бұрын
We haven't changed the design of the K2, this video is still accurate.
@wstt47 ай бұрын
Great video. Thanks. Do I need to test my water pressure and flow to make sure I don’t have too much psi in my water supply? How do I test PSI if my system splits after the water meter, with one side going to pressure regulator and to house with spigots outside, and the other side goes to an anti siphon valve and then to irrigation zones? The house spigot are after a house pressure regulator so useless to test psi there. The county said the fire hydrant 20’ away they tested at 115 psi. I want to out drip zones in.
@Krain7 ай бұрын
Checking water pressure and flow should be done at the irrigation systems Point of Connection which in this case would be the anti-siphon valve(s). Because the home and irrigation system share the same water supply/meter, all checking/testing should be done when no other water is in use. Even then should only use/count on 75% of the water supply/pressure. This will allow water use in the house and still allow the irrigation system to function correctly.
@musiculator8 ай бұрын
This is a silly and useless video. Its clear implication is that the nozzle setting and the arc setting should be tied together. Specifically, the video implies that nozzle #1 should only be used with a 90 degree arc setting, nozzle #2 should only be used with a 180 degree arc setting, nozzle #3 should only be used with a 270 degree setting, and nozzle #4 should only be used with a 360 degree arc setting. This implies that this product should only be used in applications where there is a one-to-one correspondence between the arc that the user wants to cover and the distance from the sprinkler head that the user wants to cover. In the real world, there is no such correspondence. After many years using KRain products, it is disappointing to me to see such poor product support on display.
@kebaralejandrodiazmendez78958 ай бұрын
It would’ve be great to have this video in Spanish for my customers.
@Krain8 ай бұрын
I will see what the team can do
@conorwalters23678 ай бұрын
Thanks for the useless video
@TheHomeSearcher9 ай бұрын
Wait the nozzle on the k8000 can be changed?
@tinatinm9 ай бұрын
Wow, Whole one semester worth college material in 30 minutes, great video! Thank you
@Krain9 ай бұрын
Glad you enjoyed it!
@germanvargasgervar19 ай бұрын
Dónde puedo conseguir el control wifi
@Krain9 ай бұрын
If your model is wi-fi ready, you will just need the Bridge. www.krain.com/pro-lc-bridge-wi-fi-module-3100--bridge
@pyrothefirst9 ай бұрын
The select part rips off and jams the sprinkler head
@Krain9 ай бұрын
That doesn't seem right! Please contact technical support at [email protected]
@luleska110 ай бұрын
Great! Thank you. The instructions on the package were confusing and useless
@Krain10 ай бұрын
I'll let the team know that handles the packaging!
@stonehillpumpandirrigation10 ай бұрын
Very good valve. Its a shame we don't have the DC coils for the valve in Australia.
@Krain9 ай бұрын
I'll let them know
@TheHomeSearcher Жыл бұрын
0:25 that's cause of the rain bird 5000's slip clutch
@Krain Жыл бұрын
We hold our own patent.
@TheHomeSearcher Жыл бұрын
why is it a superior to a rain bird 5000
@americolopezguerra5776 Жыл бұрын
Como se que trae pila de respaldo
@Krain Жыл бұрын
It comes inside every unit.
@aleperez57767 ай бұрын
Hola tengo el mismo programador y vino sin la pila interna, me pueden indicar que modelo y voltaje de pila que se le debe colocar
@americolopezguerra5776 Жыл бұрын
Trae respaldo
@lahiruatapaththu3088 ай бұрын
what is the difference between programmes & Stations.
@dlad455 Жыл бұрын
I need to know what # of the nozzle are?? (more water/less water) and distance
@Krain Жыл бұрын
#2.5 is the nozzle installed.
@polishtimmy505 Жыл бұрын
nice
@CC-ip3ve Жыл бұрын
What do you mean count flow rate from the end of the line backwards?