Had to stop watching because of annoying music.

humorous for the 1000 psi but it would have useful if you started at 200 psi and worked your way up to find the exact failure point.

How does exercising the valve keep corrosion away? I never knew to do this.

I bought a Kohler Arsdale R24213-VS.... Its a "water saving unit". The water saving valve (restrictor) is reducing the water pressure too too much. I'm getting a very low water flow. Kohler is going to send me a replacement valve thing. We'll see if that helps. Can you show how to remove that plastic control valve piece. It has a small metal clip.....

The key questions are what does it cost in labor and materials. And what does it cost the homeowner. Only then could one make an educated decision. Would not be enough to simply know the cost to the homeowner.

idk what's the deal with these valves. i had 2 one as shutdown and a small one that was working like a tap with a hose, and both the ball got stuck and wasn't moving despite the handlet doing so. update: i managed to fix the shutdown one by removing the handle and pushing the stem down and it connected to the ball again, the other one was too much loose and couldn't fix it and i think i damaged it by disarming it because now it leaks in the middle of it lol.

cool video

I am here searching about the “quarter turn angle valve” because it is clogged. Our house is only 6 years old and it already failed! He is right, the quarter turn angle shut off valve is junk!

Never would have thought of this result!

Love good comparison video like this, so helpful!

How does the Lining handle Water Jetting which is common in my area to unblock drains

Wow 1st time seeing this

thanks, excellent and very helpful review! this is a real comparison! you have no idea how many "comparison" videos that are just affiliated marketing I had to skip to find yours. 😂

This is practical in Belgium and we also have lining of the tube with a UV device and partial repair with a splint as well

i need thjis service in mexico pls

how much is the charge for this procedure? 10K?

Very Informative! Kudos to you and your channel!

Great video thank you

Hi nice hot jet. Would you recommend this size jetter

Can you line your new copper pipes before you install them in your home?

all i need to see is someone pushing the handle in and pulling it out. Someone needs to give me a review of what it feels like in your hand when opening and closing. :-)

great video!

IF BOTH DELTA AND MOEN WATCHED YOU, THEY'D BOTH BE PERFECT!!! YOU SHOULD CONTACT THEM AND AT LEAST LET THEM KNOW

Vlad, thanks for your review. It's helpful!

I think our faucet products are the best, without any brand premium and without compromising on quality compared to theirs

Moen is made in the usa

Unfortunately it won't work for Broken Pipes

Can anyone do this in the Houston area?

Thank you, this worked!

Thank you for the video. I'm not sure about Kohler but I know with past experience that Moen, much like countless other mega-million dollar businesses, has adopted the You-Make-Us-Rich-And-We-Provide-You-Absolute-Shitty-Customer-Service policies

We have had Kohler in every home and they are terrific. If you have problems down the road they send you the parts or replacements. I had faucets in our home last 12 years no problems. A vote for Always buy Kohler.

No 1/4 turn valves for me. Another reason to avoid them, they can’t be repaired. You can buy a rebuild kit and put new seals in the multi turn valves without removing the valve body. Now you have a new valve and you didn’t have to shorten the pipe stub coming out of the wall to install a new valve. Most homes, you only have enough pipe / tubing to cut it once or twice to install a new valve. Just leave it alone and put new seals / stem in it. I can’t figure out the desire to go to 1/4 turns. It takes 5 seconds longer to close a multi turn valve….who cares?

Damn I wish I knew about that. Is that better than Hammer-Head® Trench-less liner what I had installed in my place? I was very limited on what I could do with my duplex I live in. My place has no crawl space just a concrete slab and that's it. I was worried that having in lined would make the sewer pipe to small and cause more problems. The descaled and ground down pipe and then epoxy lined looked to be a better option on my end. I was told that it would not work right and be as strong as that Hammer-Head Liner which is VERY VERY Strong in the it reminds my of a wool sock that has been dipped in a glue it was so strong that I stood on it and it bent very little and that was it. It cost my 17,000 bucks with a 40 year warranty

everything old school was built better.

Be careful. Nowadays, if you buy a Kohler fixture at Home Depot, they will put a target on your back and you will start to get spam calls. Did you buy fixtures at Home Depot? Do you need help? Do you need a contractor? Am I bothering you? Am I calling your personal phone? If we can come to your home do you have any dogs that will bite? What kind of car do you have? How can we tell where your house is? Are we bothering you? Things like this have got to stop

Less than 3 min install nice!!!

How do you avoid damaging the pipes with pressure water?

Que interessante. Ótimo trabalho. Parabéns!

Did you know before how the epoxy liner work?🤓

Did you know that it is possible to change all sewer pipes with no mess?😏

Have you ever seen such old pipes?😨

Did you know why septic tanks are so useful?

Which kitchen sink faucet would you like to see in our next video?🤔

Would you like to install the same showerhead in your home?😍

Have you ever seen the process of relining over 1000 feet of cast iron pipes?🤯

Thank you Almco. This video was a lifesaver! All other videos show the easy removal of the more modern type of faucet. Seeing this video showed me how to remove the old faucet. (Allen wrench set screw--corroded of course--at the base of the faucet above the sink was the key.) Once I cleaned out the access and found the right allen wrench, I was able to lift the old faucet off to access the phillips head screws that you show in this video. After that it was smooth sailing! Without you it would have remained a mystery.

Как плохо что я не знаю английский

thank u for this video and explanation .looks like i will need to replace my valve

Thank you - I'm going with your choice.

Good demo👍