I thought you can use Oil Base Paints or Stains with this ??
@darrencookfishing7961Күн бұрын
Very awesome thanks for the video....now back to work
@valsflor16865 күн бұрын
Great vid.
@bernardzeszutek84916 күн бұрын
Thank you for your videos!
@jeffhopper352611 күн бұрын
Thanks for the video. Plan to purchase and spray oil paints with Ultra Max. I understand you're supposed to use Ground / Earth wire(?). Have you a viseo on spraying oil paibts with Ultra Max? Cheers from Texas USA.
@eezy251able12 күн бұрын
Do you think these are actually worth the money though mate? Seems exspenisive for what it is?
@TheRetroRugbyLeagueArchives12 күн бұрын
great video josh love it thank you buddy......sorbs
@blinko65613 күн бұрын
I forgot how to put the parts back together. Probably cause I’m getting older ha ha. True though. Thank you great description. We can see everything and what you and we can understand what you’re saying. Thank you.
@4bob94818 күн бұрын
I got 1 tip, no filters and no pump armour in my pack
@JohnSmith-g5t19 күн бұрын
Hi there! I’ve seen you say that solvent based paints shouldn’t be run through this? Why is that exactly? Also, the gentleman at sherwin Williams that sold me this told me I can run emerald urethane through this no problem. Isn’t that a solvent based paint? Did he lie to me? Thank you for your help.
@trevoradams867521 күн бұрын
Why is there a maximum daily limit? Can’t you just keep painting till you’re done? Thanks
@ardianneli125 күн бұрын
And now try that with "old-school" sandpaper :)- grain all over the workbench ;)
@rsawycky25 күн бұрын
This thing sucks. Broke after two uses by having the internal pump mechanism explode while filtering warm water through for cleaning.
@toddmatthews-rj1pq27 күн бұрын
Thanks for the video, fellas! I bought a used one from a friend who used it to spray his house. It’s been about six months since he used it. He says he used the armor protector. If it were not working properly, how would I know? I tested it with water and it seemed to work OK.
@FEV36928 күн бұрын
Now if only they thought to make a bigger hopper or even one you wear as a backpack...................................................................... then they might have actually made something useful.
@ElectricIguanaАй бұрын
Best video I've found so far, explaining the difference between the models. Seems odd its so hard to determine the differences any other way.
@GOIndustrialАй бұрын
Thanks for your feedback! Happy spraying 🤝
@BK-gc1jmАй бұрын
Good job .I own one also
@GOIndustrialАй бұрын
We hope you like it!
@destinyremodeling3733Ай бұрын
IS THIS SPRAYING MUDD OR PAINT?
@GOIndustrialАй бұрын
This is topping compound - plaster!
@arpmallwoodpolish197Ай бұрын
Wood polish solvan base use machine
@foreignboimike4319Ай бұрын
One of the best reviews so far
@hermespintorАй бұрын
Thanks Josh!
@kenfranks3283Ай бұрын
Back roll your work!
@luanahaigood278Ай бұрын
My gun is leaking where tip screws on. I have tightened and hand tightened. 😢gun is brand new.
@GOIndustrialАй бұрын
Hi there! It might be that the OneSeal, which is a rubber seal and metal seat, is not in the back of your tip guard correctly. Please watch our video here: kzfaq.info/get/bejne/aK-Di7GXuriUaJs.htmlsi=NEET9-j18p_34rNz
@AngieWilliamsDesignsАй бұрын
Great video.
@JimBob-q5rАй бұрын
Great video simple and to the point as so many videos I passed on were 11 minutes +. I just blew out my last tip connection yesterday so I figured it was an o ring but was trying to install between the sliding piece and the inner port fighting bearings falling out and such🤦🏻♂️ im so ignorant I tried 4-5 different sized orings before getting pissed and throwing a fit, figuring that there was a good chance that I was doing it wrong after calming down last night I decided to check the you tubes and found exactly how easy it is compared to what I had tried. I have been buying o-ring kits to have on hand for a couple of years now and as someone who feels the need to make an effort to repair my own equipment before entrusting to strangers it’s become a standard practice to keep a variety of o rings on hand. Theyre cheap enough where I have bought them so now that I know how simple and quick it is I will start changing them routinely before they wear out. Thanks for the lesson 🙏🏼
@matthewvynckier2090Ай бұрын
Graco Ultra Max II 490 have hard time getting it to pump i have clean everything and still not geting no were. is there anywere in canada to get this fixed ?
@AngieWilliamsDesignsАй бұрын
I picked this sprayer up yesterday. I had a demo first. Loved it. Love it even more that I got it home and I’m able to use the materials I normally use. But thanks you for sharing this.
@waz1167Ай бұрын
Thanks for the great video. I will use your advice for my fence.
@topnotchtrainingandfitness4239Ай бұрын
Did anyone else notice the safety harness not being connected to anything? I've definitely been there tho 😂 I get it
@grbetina1Ай бұрын
What do you mean by liters a day? Because couple of day ago we used x7 and we sprayed 25 gallons of paint in 3 hours and there was no issue with it running and it's still going strong
@nekbiodieselworksАй бұрын
Everything you need to know. "Its amazing!"
@NICK_1979Ай бұрын
Josh, i hope you're well, mate. I've picked up one of these machines myself. I'm looking forward to spraying doors, door frames, and window frames with it, primarily in an acrylic based paint for trim. I'm just curious, have you tried using enamel paint through it? And if so, how did it spray?
@JONO36792 ай бұрын
Not sure what you mean by conditions what ever you set the pressure to thats what it should stay no matter what.
@GOIndustrial2 ай бұрын
That is correct. However with larger airless sprayers, particularly when running greater lengths of hose and spraying thicker materials, pressure drop is a very real variable that needs to be considered.
@JONO36792 ай бұрын
You supposed to release the trigger so the pressure remains the same...
@GOIndustrial2 ай бұрын
Every time the trigger is released, depending on your model of sprayer, there is a dead band in pressure where the piston pump will need to build enough pressure to stall at your desired setting. The newer tech gets, the better the reduction in that dead band.
@JONO36792 ай бұрын
@@GOIndustrial just a bad habit to get into will cause more problems in the long run
@user-ed7km9pt2e2 ай бұрын
Thanks for explaining
@GOIndustrial2 ай бұрын
You’re welcome!
@user-fe1we1kd9b2 ай бұрын
Which machine would be best recommended for occasional doors, cabinets, and interior woodwork
@SacredHeart05202 ай бұрын
So cool but extremely over priced
@JONO36792 ай бұрын
Has it broken yet
@GOIndustrial2 ай бұрын
Nope! Going as strong as ever 🤝
@JONO36792 ай бұрын
@@GOIndustrial how many ltrs would you say you've put through it..
@SquareBodyMudTrucks8052 ай бұрын
I have a graco project plus sprayer and I’ve been painting the exterior of a 3 bedroom house. I’m almost completely done with the house and my sprayer won’t spray paint anymore. It primes and sprays water out and then it’ll get paint starting to go through then just stop. Is my pump going out or does that just mean it’s clogged somewhere?
@07swbxrunner2 ай бұрын
Homeowners, you can spray your whole house inside and out with this.
@Dontworryaboutit122 ай бұрын
I’m using my quick shot for the first time, it’s a little more intensive to clean than my graco tc pro
@samsamesam26192 ай бұрын
Hello, thanks for the lesson. How can I get the repair kits for 3400?
@camerongyening98632 ай бұрын
How do you unscrew trigger if pressure is full
@BK-gc1jm2 ай бұрын
I bought that new ultra quick shot with the dewalt battery mix spraying so much easier. I'm saying it really slow it's so much easier
@BK-gc1jm2 ай бұрын
Good video
@Lanzend572 ай бұрын
Effing great, mate!
@GOIndustrial2 ай бұрын
Thanks a lot!
@eddiegonzalez99242 ай бұрын
When did you change tips? Did the true airless tips not work?
@GOIndustrial2 ай бұрын
They definitely do work! We’ve just sprayed a lot more with our contractor FFLP tips and are very familiar with how they atomise, so we swapped one in for the ease of the job 😊
@aresident77452 ай бұрын
why does no one make a paint sprayer that can do both kinds of paint and is made good like the old ones. either way you gotta clean them and a metal unit is easier and you can thin your paint and get more money out of it if you want
@kingcallahan242 ай бұрын
Ayooooo
@todddlaird2 ай бұрын
You spent zero time pointing out the packing and how there different on both sides ,
@michaelsoumelidis93322 ай бұрын
Totally agree I’ve done this before you should’ve explain which way they go in