This can be as simple as a shim, clearance between cam and valve lifter shim is too great. New shims and maybe 1 hour of labour. 👍🏻
@pchansen100 Жыл бұрын
Slightly used 172 for sale AS IS.
@JanetManu-ti6dy Жыл бұрын
How can we fix knock engine for 97 toyota camry sv40
@bingletongaming1924 Жыл бұрын
ryanair landings
@stephencaudle1766 Жыл бұрын
Compared to my landings that was butter
@yourboyyrico332 жыл бұрын
What was the final diagnosis
@TANTRUMGASM2 жыл бұрын
the twangy Guitar from "Jackass" should play 2 seconds after it thuds. Cheers
@divineoracle48092 жыл бұрын
My 1999 just decided it wanted to do this today (on a less extreme scale so far), ironically the same day we were out car shopping and getting emissions done on this guy. 151k miles, we bought it less than a year ago. I've maintained it, but I've noticed signs that this would happen due to the previous owners problem with keeping up on maintenance. It has always sounded a bit on the rough side. I've done research, apparently there was a class action settlement about this problem in the early 2000s, the 5sfe and the 3.0 V6 from 1997-2001 were prone to sludge if not maintained. I wish I had been wise, I wouldn't have bought the car. Funny thing is, my dad drove his 2000 for 300k+ miles with the original equipment, then again he maintained it regularly. Lessons learned, thankfully it got us home.
@willywonka5212 жыл бұрын
Seems like all toyota 4 cylinder motor do this or blow head gaskets for no reason
@willywonka5212 жыл бұрын
Typical Toyota shit !
@whiteknightcat2 жыл бұрын
And the purpose of this video was ... ?
@willywonka5212 жыл бұрын
Toyotas are crap
@whiteknightcat2 жыл бұрын
@@willywonka521 Tell that to my own '97 Camry that's never had an engine issue, and looks 10x better cared for than that junkyard candidate featured in the video.
@GlenAndFriendsCooking3 жыл бұрын
Ooooh - I need one of those arrestor nets in my driveway! Then I wouldn't need to drive home from the airport... Now I need to find a Cessna 172 slingshot video for the take-off and we're all set.
@runrey3 жыл бұрын
Engine pump maybe, i had similar, it was it
@fixitfelix86163 жыл бұрын
The engine has a spun bearing it's a pain in the butt to fix. You better going to you pull and pay and getting another one. Just make sure to sping the crank to ensures it's good.
@marionoralez3263 жыл бұрын
Whats that knocking my 1997 camry is doing that.
@muhammadsteinberg3 жыл бұрын
That's a crash? In my 38yrs of flying I've landing like that a few times, or at least it felt like it.
@Dennco20003 жыл бұрын
Yes, rapid decent then land the plane anywhere fire or not.
@TRPGpilot3 жыл бұрын
So basically the main landing gear is unbreakable. Impressive!
@dsciarrino36633 жыл бұрын
Junk.
@hondacrxrus3 жыл бұрын
is 85 knots enough to put out the fire? I think the poh says above 100knots which is outside the full flap range. I think faster is better in an engine fire situation. You have a better chance of putting the fire out and have a quicker descent. What was your reasoning for doing maneuver with full flaps?
@PaulFriz3 жыл бұрын
This is how my instructor taught me to do the maneuver when I was working on my ppl. My understanding is that when you use full flaps you maximize drag which helps the airplane dissipate energy fastest and helps you get on the ground fastest. If there were a real fire you would probably want to go faster than 85 knots but since there was no fire we went at 85 knots so we didn't damage the flaps.
@hondacrxrus3 жыл бұрын
@@PaulFriz I just did an simulated fire emergency descent with my instruction we did with no flaps at 100kts and its very tricky bleeding off that speed right before you land. I did an S turn and added flaps as I slowed down. Thank you for your response.
@PaulFriz3 жыл бұрын
@@hondacrxrus now that I think about it I remember my instructor telling me that if you are higher and trying to put out the fire that you can try diving at vne with no flaps to attempt to put out the fire but if you are trying to get on the ground as fast as possible do full flaps and maximum flap extension speed.
@hondacrxrus3 жыл бұрын
@@PaulFriz my experience you get higher FPM descent with no flaps and you can also slip a little to get more. I was over 2000 fpm without any slip. also my thought going to vne or at least 100 kts is good but you also want a turn to throw fire to side. but then going over Va you want to be careful maneuvering. I hope neither of us ever find ourselves in that situation.
@mjmv43684 жыл бұрын
Nice video, beautiful looking aircraft as well!
@rocketpower254 жыл бұрын
Just happen to me today
@glennm63994 жыл бұрын
I haven't had an oil change since last June..smh...i put more in there now..so like 3 drops on my cardboard...drove it around for a few...the clicking wasn't loud as before but u still hear it
@glennm63994 жыл бұрын
Mine is making that noise now kinda... I noticed it the other night coming from work. Think i needed some oil..i put the wrong oil in a w10.30 ... The next day i put 2 correct oils in there on top of the wrong oil...my car rode fine for a few..then it locked up on me as i was driving..i parked let it rest for a few mins... Turned it back on and just drove like 10mph back home.
@pherbolandkrazy51353 жыл бұрын
Bruh my just did that today
@modelopapi57813 жыл бұрын
What was it
@brycelund71554 жыл бұрын
Sounds like a stuck lifter.
@conner56114 жыл бұрын
These dont have lifters they have shims
@brycelund71554 жыл бұрын
snattle rake no clue what that is.
@conner56114 жыл бұрын
@@brycelund7155 there little metal shims that go over the valve bucket they should be replaced every 100k but people rarely do it since if they wear there only a little more loud
@cdos91864 жыл бұрын
Did you check the oil to see if it there was enough oil in the engine?
@MattExzy3 жыл бұрын
oil or no oil, it's redundant at this point lol
@cdos91863 жыл бұрын
@@MattExzy :(
@grizzlyburrito10474 жыл бұрын
This just happened to me today 😂
@calvinsoldier41626 жыл бұрын
I know what the problem is it is a piece in the timing chain I just got mine fixed
@etx_chon15065 жыл бұрын
Calvin Soldier which part? Mine 1994 Camry is knocking
@ayomiposiaribilola69855 жыл бұрын
Calvin please what is the piece in the timing chain that you changed?
@conner56115 жыл бұрын
Calvin Soldier these have belts not chains...
@pollux33085 жыл бұрын
It's a non interference so not it
@viktorvezdenetskyi78195 жыл бұрын
these don't have a chain they've got belt don't confuse people
@TheMynameispingu6 жыл бұрын
Another happy landing
@efrainfortiz6 жыл бұрын
That’s the reason why I love ❤️ my c172 aircraft, its slow but very reliable and safety.
@radude47636 жыл бұрын
This is currently happening to me, did u find out whats wrong with it)
@Daynightvisual5 жыл бұрын
DJCJ I’m wondering too. I just got the noise right now
@ayomiposiaribilola69855 жыл бұрын
Please have you been able to have this issue changed?
@eliezervelezful4 жыл бұрын
Did any of you guys found what was wrong with your car? How did you fix it?
@driverjeff14986 жыл бұрын
Rod top or bottom one sure enough,need a head also,even tho its a non interfce engine that piston is ptolly slappin the bottom o head ,advice - part out on craglst or ebay take the rest to the scrapper. Not 1 dollar would be worth investing in that car,better to make payments on a newer model
@sierrahixom4 жыл бұрын
It's worth it because nothing these day is reliable
@mjmv43686 жыл бұрын
I really like the scene at 2:32, It is almost as if you can taste the rocks and grit that it tosses into your food just by watching it.
@worstkunjeeten6 жыл бұрын
Great video! What is the name of the soundtrack?
@PaulFriz6 жыл бұрын
Thanks I'm glad you liked it! The song is Breaking Passion by Tristan Barton.
@mattfarrar54726 жыл бұрын
That would have been awesome watching it from there mate, wonder what happens to the pilot who caused it.
@PaulFriz6 жыл бұрын
Not sure. I don't know that the FAA figured out who it was.
@alexlevy6 жыл бұрын
If there were no TFR's and he didn't bust any specific airspace, nothing. Technically isn't that LC's problem? They didn't properly filter the airspace?
@PaulFriz6 жыл бұрын
There were no TFRs or notams but he was in restricted airspace.
@alexlevy6 жыл бұрын
Ahh.. then yes, FAA sanction incoming assuming they find out who it was.
@wowie746 жыл бұрын
I think it needs crankshaft bearings replaced.
@fishyspwnumlg32577 жыл бұрын
who tf let there car get that filthy obviously no one gave a shit about it
@kelseywhitaker65657 жыл бұрын
What do you shoot with?
@PaulFriz7 жыл бұрын
+Kelsey Whitiker, all the footage in this video was shot with a Canon 6D usually with a 16-35mm f/2.8L lens. Individual frames were stitched together in lightroom.
@AmbroseReed7 жыл бұрын
Congrats Paul!
@MrLance08057 жыл бұрын
So the earth is a perfect sphere and not an oblate spheroid as described by NASA. Wait.. Is this also from NASA?
@3iikka7 жыл бұрын
It's an oblate spheroid, but the oblateness is only very small, so it can probably not be detected in such a small image. It's a common misunderstanding, just like the elliptical orbits of the planets. The orbits are called elliptical and are also often shown exaggerrated, which has lead to the misunderstanding among normal people, that they are very elliptical, while in reality, they are almost perfectly circular. Same misunderstanding happened with the oblateness of the earth and many other things in science. When non-scientists hear science, they very often misunderstand it, because they don't have enough information. That's why it would sometimes be better if people didn't believe what scientists tell them, because usually they misunderstand it.
@cybernit37 жыл бұрын
But watch out for the True Blue Orion Angels..... be good and wise!!! - ECK TAH ZAH (THE POWERFUL ONE)> I LOVE HUMANS AND I AM ONE OF THEM.... friend from Canada
@Mechanical_Insanity7 жыл бұрын
it sounds like my grandmother when she tries to think :-)
@TheSparrowLooksUp7 жыл бұрын
Jeb Kerman would be proud
@Ecksterphono7 жыл бұрын
thats shot
@PaulFriz7 жыл бұрын
Yeah I sold the car to a junk yard right after.
@Bergstaller017 жыл бұрын
I believe it's called a Gnome Monosoupape
@PaulFriz7 жыл бұрын
The Gnome Monosoupape was first introduced in 1913. This engine was built in 1908.
@PaulFriz7 жыл бұрын
I did a little digging and I'm pretty sure the engine is actually the Gnome Omega! Thanks for putting me on the right track.