@@loichristopher3806 thanks mate appreciate it 🤙🏻 amazing place to fly with the Avata 2 next time I go there I won’t be so conservative and hit more gaps 😅 thx for the sub also subbed 🤙🏻

Yes Indonesia is amazing 🤩 thank you 🙏🏻

Thank you 🙏🏻 😊

Haha thank you brother hope you like it! ❤🔥🔥🔥

@@Backupip7Xyz3 thank you 🙏🏻

@@sogol09 JAVA is FPV heaven 🤤 makasih 🙏🏻

@@roguechaos7631 I’m currently using Dogcom 1850 for close proximity/mid range good power to weight ratio and flight time depending on how you fly it, also 4000li-ion for longer distance cruising and I’ve just ordered 2x 3000mAh GAONENG GNB LiHV which are only 400g so I’m expecting very good flight time with those. Keep your batteries between 400/500g for good results 🤙🏻

@@explorerfpv thank you so much! what website would be the best to purchase these batteries. Im leaving on a trip in 2 weeks and need to find a site that will ship withing that time frame.

@@roguechaos7631 what country you live in?

@@explorerfpv USA

@@alexrcroes thanks mate 🤙🏻 Would love to help but I took that CRSF mount from another drone I had so I don’t have the STL file. My suggestion would be to flick through thingyverse and try And find one the is suitable I think most 5” quad front mounds would fit.

@@Goonii thanks mate appreciate it 🤙🏻😊 subbed you back ✈️

@@user-is8hh4pv3d thanks mate really appreciate you 🔥👌🏻☺️ Legend 🤙🏻

Thanks legend appreciate it 🤙🏻 BOB57 version coming when I get time to edit/upload , looks pretty awesome 🔥✈️

Thank you 🙏🏻 yes it’s been a long time dream to fly KELINGKING and I finally did it 🥰 also BOB57 version coming when I get time to edit and upload 🔥

Thank you 🙏🏻 it was amazing flying at that location 🔥🤤

Thanks mate 🤙🏻 I always put stronger straps on all my Quads they are just better quality than original ones you can do them up tighter and they won’t break on impact, plus it’s a nice cheap mod to do as they also look pretty cool. Got loads of footage to upload over the next weeks keep an eye open I’ve been in Indonesia for the last 3 weeks flying. Cheers for watching 🤙🏻

😂

No mate not at all - flys perfectly straight and smooth 👍🏻

@@explorerfpv mine did when I first got it but over time it’s developed a slight lean on the roll axis. I can fly it still as I’m used to flying against it sort of but it’s well annoying. If I centre both sticks instead of just heading forward it’ll start to roll usually to the left really slowly. I’ve not changed any settings or anything so I have no clue what it is or why. It’s savage coz it makes me not fully trust it as I’m worried it’ll just get worse at some point. Probably when out over water or something. Any ideas what it might be? I’ve done the recalibrate accelerometer in BF, but other than than I just dunno what to try. I just want him to feel how he did for his first couple months.

@@haroldofkernow9279 yeah I understand what you’re saying my first thought was calibration of the accelerometer but you’ve already done that. What about calibrating your RC sticks and fine tuning your remote make sure everything is how it should be, It’s just a stab in the dark, since you haven’t actually touch any BF settings 🤷🏻‍♂️ I don’t really have any other answers unfortunately without flying/seeing it myself. If it’s not the stick calibration take some DVR footage (if possible) of problem and post it on FB Team iFlight FPV page and I’m very sure someone will give you some other suggestions, there are a lot of helpful people on that page. You could also go to the iFlight technical support take a ticket and someone will go through it with you to hopefully fix the issue. Get him back to how he was, Let me know how you go with it 👍🏻

You can send BOB out as far as your battery will allow you too! My max distance out on this quad is only 3km so far.

@@explorerfpv thanks! 3 km is pretty good! What battery are you using to send it 3 km?

@@VideoAve that 3km flight is easy with a 1850/2200 dogcom lipo at medium throttle. Use a 4000mAh liion and get at least 10/12mins.

@@explorerfpv thanks for the info! I got some CNHL 2000 mAh batteries to start with. Will practice with these and then will get a larger battery to fly farther.

Thanks dude 🤙🏻 not bad for DVR footage it’s pretty clear, yeah I’m very pleased with the GPS rescue, I’m upgrading all my quads, working on #3 now 😅

Hey mate 🤙🏻 It’s going to be more personal preference with which goggles you use, but the new Goggles 2 are better, better range better viewing with the 1080p resolution, it’s a no brainer for me! I have both goggles2 and V2 I haven’t used my V2 since buying the goggles 2 I’m probably going to sell them, there will be another DJI goggles being released this year to support the 04 air unit. Move forward with the future bro and get the goggles 2 you won’t be disappointed. You can get an aftermarket foam face plate to make them more comfortable to fit your face. Good luck with your new BOB57 it’s an amazing drone mate! 🤙🏻✈️

@@explorerfpv thanks mate, appreciate your thoughts💪🏻 🙏🏻 Now I am going to buy goggle 2😁🤝🏻

Thanks for watching bro I really appreciate that, sorry for the late reply I’ve been on holidays with the family! For what it is the 03 does pretty well with the right settings/ND filter as long as it’s on a drone that flys good/smooth with minimal vibrations. Once you start getting vibrations it’s very hard to get good stabilised video even through gyroflow. BOB57 flys smooth so you shouldn’t have any issues, I much prefer using my GP on BOB he can carry it with a good size battery no problems but as mentioned it’s good to have that 03 option. Hope your drone arrived safely happy flying dude ✈️🤙🏻

Same as the stock antennas but longer! Iflights 15cm Albatross antennas, you can also get them in 10cm either size would be much better than the short stock antennas for mid to long range if you can’t find them at your local FPV shop try Iflight website or AliExpress

Ok thanks but their is two types of antennas, rhcp sma and lhcp rp-sma. Which one do I choose?

@@user-is8hh4pv3d antenna on your drone has to be the same as the ones on your goggles lhcp 👍🏻

Thanks a lot you earned your self a new subscriber 🎉

It’s a battery strap to prevent the battery from ejecting in a crash! So I can still use the beeper to find it. Just a normal longer battery strap from an FPV drone. I’ve actually crashed this Avata a few times and battery always stayed on 👍🏻

Nice, thank you@@explorerfpv

@@carlosdd262 Hey no problem my friend 👍🏻

No mate 😂

@@explorerfpv damn, what do you recommend for a first fpv drone?

@@stevencigar9897 the Avata is a good choice for a beginner, you can learn how to fly in normal and sport mode then progress to manual mode when you’re confident enough to do so! Or you can first buy a remote and start hitting a FPV simulator in your PC and jump straight into an FPV drone when you have built up enough sim time and have enough control to take off fly and land. It will also depend on your budget too. FPV is a very expensive hobby LOL take a look at the iflight Evoque series F5 or F4 I have both they are amazing drones. Do lots of YT learning and research. My first FPV drone was the DJI FPV, I flew in sports mode until I was confident in the Simulator then once I flew in manual mode after 20 hours of sim time I bought an EvoqueF5. Then it just spiralled out of control 💰💰💰🤷🏻‍♂️😂

@@explorerfpv okay ill look more into it thanks for the friendly advice and happy flying !

GPS is an added option it doesn’t come standard with the F4

Absolutely love everything about the way this drone flys! I’m looking forward to getting more flight time with BOB 🔥🚀😅

i thinking the bob57 or the or Nazgul Evoque F6 not sure if there much difference dont want crazy freestyle but cinematic flip or loop @@explorerfpv

also how would you compare to the DJI FPV ?@@explorerfpv

@@YTFPV yeah that’s a hard decision 🤯 I already have the F5 so it was a no brainer for me to get BOB! But I’m sure the F6 would still be an awesome choice

so your have the F5 and the Bob ? your like me buying all of them lol@@explorerfpv

Yeah that wouldn’t hurt! Hit it early morning and be gone before the train arrives on the platform 😉 Be a good idea to waterproof your quad too if you plan on getting in close, fine mist everywhere when it’s raging 💦

For sure! I definitely should get some conformal coating. Maybe ziptie a piece of pool noodle to the bottom of the quad or something, just in case. I still doubt I would have any chace of getting it back though.

@@sethwalmsley5287 bro once you leave the platform you are at the point of no return 😂 - in the dry it’s a LOOOONG walk up to the falls from the power station! I don’t see any other way of getting down to the falls. In the wet kiss it goodbye, leave the pool noodle at home 🤙🏻

Thank you my bro it was a fun day 🔥🤙🏻 going to try and render a better copy through gyroflow, but too happy with these jitters 😕

Thanks Seth 🤙🏻 I will be flying the crap out of this place in the wet season and especially the falls when they are raging, I did it last Wet with the Avata but I’m real keen the dive it in the wet with a real quad next time. I have another video to upload shortly diving the falls that same day keep a look out. Using filmora12, footage looks fine on my end and wife’s phone, it was a tiny bit stuttery on that second dive turing around up top but the rest should be fairly smoothed, First time I’ve filmed in 50fps with the 03 that, and possibility the mirco stutter you are noticing is caused by the stabilisation through gyroflow. I don’t mind using just the 03 footage it’s pretty acceptable especially in less windy conditions flying smoothly gyroflow works very well…BUT I have found when it’s windy and I’m flying a lighter quad or Avata the footage is a shaky and gyroflow has a hard time smoothing it out completely even at 100% if you check my Avata footage “mountain flight bingle bay” - you’ll see a good example of the Avata footage climbing that mountain! In my OSD it was shaky AF like really bad and gyroflow couldn’t smooth it completely resulting in noticeable micro shutters. I’m pretty sure I’m using gyroflow to its fullest and I have tried to get those micro shutters out but to no avail which leads me to still believe GP Reesteady is superior 😂

@@explorerfpv I'll keep a look out for that next vid. This vid wasn't that stuttery, i had just noticed it a bit more in some of your other vids. The footage is really good, I dont know how good GP reesteady is from my own experience, but I've heard that it's better than gyroflow

After what you said about the video being bit stuttery I had a look on the big screen, you can really notice it! Not so much watching it from your phone but yeah it’s not good mate 😢 I’m going to pause this video for a bit and try to make a better version! Maybe I need to do some more Gyroflow tutorials 😅 see if I can get it smoother 🤷🏻‍♂️ thanks for the heads up mate 👍🏻

All good! Glad I could help.

Thank you bro 😊🙏🏻 North Queensland, Australia - this is the Barron Gorge & power station. killer place to fly huh 😅😍 I got another one to upload hopefully tomorrow taken further up the gorge over the Barron falls with the F5 👌🏻

@@explorerfpvcant wait! give it a rip mate

Aren't you in china?

@@sethwalmsley5287 i am. scenery looks bit similar so i ask where you are. but our places are not that cool.

@@cloudpandarism2627 Oh right, I can definitely see how that could be mistaken for china. 😄

Hey bro I used that Immortal T mount from my GEPRC crocodile 5” so if you can find the STL for that then you’ll have the same one. I did have a search for one but I couldn’t really find what I was looking for, hence why I used that off my other quad. Sorry dude would love to help you out!

@@explorerfpv hey no worries that was plenty helpful enough. I’ll look for the crocodile print and go from there. I want to get the BOB57 and add crossfire diversity and do a vertical off the back and horizontal on the front. Anything you don’t like about the quad?

@@neuroticsdubstep if you do find it, or one suitable let me know as I want to change all my quads to front mount antenna! I just like better 👌🏻 Nothing I don’t like about BOB57 he is an absolute beast!!! I haven’t flown him much lately as I just bought the Evoque F4 so I’m still bit concerned about him not having a heatsink attached to the 03 BUT I think I’m going to just put one on myself hopefully there is enough space. You won’t be disappointed 🔥🚀

Thank you brotha 🤙🏻😊🚀

It’s just a factory BNF from iFLIGHT- BLITZ Mini stack, XING2 2207 motors the specs are on their website my friend 😊

Sure is 🔥🚀

Thanks mate 🤙🏻 yes I have flown a few packs already at the park and it flys beautifully has the same kinda tune/rates as the F5 I think nice and smooth. Battery test without a action cam - ovonic 1150 5-6mins - dogcom 1480 7-8mins @ 3.5v - 3000mAh liion 11mins landing at 2.9v that was in strong windy conditions cruising 50-90 km/h so not too bad. I’m expecting slightly better results with less wind. I will be using it mainly with the 03, but I will also wire up my GP10 Bones when I need it, just to keep it light for the decent flight times. I like this quad because it’s smaller lighter and slightly quieter than the F5 with similar capabilities so it’s a great little compact rocket to take and fly anywhere 😉

Agree 👌🏻😊

For sure mate he is very versatile ✈️ but he is still a 6” so if you want to do legit freestyle you might be better off with a 5” but for basic freestyle and high speed no problem 👌🏻

@@explorerfpv thank you for replying i have two 5 inch and need to feel how 6 inch flying profomance