Use the right bearing remover because standard internal jaw pullers only work some of the time. I found out the hard way and had to find EVERY crumb of bearing race and every roller to make sure the engine was clean of debris. HD did the INA nonsense twice, first with Evo big twins then with the Twinkies. It was a knowing choice to use marginal parts.
@jayhel236 күн бұрын
so doing this removes the farting sound without the baffle?
@JohnnyRebKy11 күн бұрын
They pretty loud on a twin cam engine.
@nobleff5177515 күн бұрын
How loud when cruising
@logannolan257516 күн бұрын
im curious as too what year is this bike. going to be doing my primary and wondering it its the same as my 03 fxdwg?
@harleydave231616 күн бұрын
@@logannolan2575 This is a 2005 and should be identical to yours.
@dennisyoung463119 күн бұрын
Drawn Cup needle bearings - both INA and Torrington are brand names. Originally, INA was German, while Torrington was originally “Domestic.” The INA bearing has a *cage,* while the Torrington is *full complement.* Full complement bearings can handle greater loads, but tend to complain if they’re turned too fast.
@1963KILO27 күн бұрын
What's the difference between de-catted stock OEM pipes and after-market header pipes? I de-catted the right stock header on my 2021 RGS and was wondering if there is any added benefit to buying a set of after-market open headers vs running my de-catted stock pipes with slip-ons.
@anglerradical7035Ай бұрын
Is this exhaust has baffles?
@kennethcalimpong7919Ай бұрын
Hi Harley Dave, liked & Subscribed, just got same setup, loving my 2020 RoadGlide 114 even more ❤, looking forward to all your content, Ride Hard💪🏼, Be Blessed 🙏🏽,Aloha Kenneth 🤙🏽
@harmanchannel7948Ай бұрын
Hi, Is VH power dual compatible with reinhart slip on?
@mk27wrxАй бұрын
Great sound bro , what type of exhaust is that ?
@ronfriendАй бұрын
Do they make an actual true dual with no H pipe?
@ozziejim84722 ай бұрын
I’ll take those mid controls over forward all day!
@RoboCop-zn8bt2 ай бұрын
That's gata be a great feeling. I Wana do the 1259 kit on mine as well. How's it feel riding?
@tonecontrol32712 ай бұрын
Wished I had bought my new PV3 from Fuel Moto. I can't get a tune from Dynojet for my M8 107 with V&H Pwr Duals, 4.5" exhaust, SE Hi-Flow AC, and S&S 475C Cam. Anyone have a DST file for such a tune that has same cam ans similar setup they'd want to share?
@harleydave23162 ай бұрын
you can buy tunes from fuel Moto
@tonecontrol32712 ай бұрын
I have the Dyno Power Vision 3 and there is no tune listed for an S&S 475C cam for my 2017 Road King Special.
@harleydave23162 ай бұрын
contact fuel Moto. They will help you.
@ChrisGlides2 ай бұрын
Nice looking ride. I’m new to road king and just watching tons of videos.
@cj81722 ай бұрын
Would sticking some duct tape around the inside of the bearing before pulling it be a good idea maybe? Good video
@phillipsmith72942 ай бұрын
What's your opinion as thinking I might do this
@phillipsmith72942 ай бұрын
What jets did ya use in carb
@travj44502 ай бұрын
😮Hey man, I'm a first timer working on a twin cam. My front inner cam bearing exploded while riding. I'm missing almost every part of the bearing. Only a bit of outer cage. No peices in oil filter. I gotta tear it down huh?
@harleydave23162 ай бұрын
Sorry to hear that! You definitely have to tear it down but in your case since you wasn't just trying to remove it and the bearing broke, you may need to pull the oil tank and flush it as well. You have to find all the pieces. 😩
@susandavis58333 ай бұрын
Thank you for this video.
@RobbieJoyner3 ай бұрын
Get on it hard a few times so we can really hear the sound
@Kaegis3 ай бұрын
after seeing this, I would like to try them in my Freedom radius pipes on my 107 Slim. Already have the SE tuner with the Freedom pipes and K&N filter. Goes well as it is but somehow you just know it is missing some torque down low. Would love S&S465 cams
@whiterabbitt20023 ай бұрын
I own a 2015 harley Super Low 1200T. Black with plenty of beautiful Chrome. Nice bike for what it is. I also own a 2020 Haley Low Rider S.
@BigTee30994 ай бұрын
I think it sounds good! 👌I’m currently running a V&H 2 into 1 propipe. It’s nice but i want something with more grunt and performance. I like this exhaust match!
@michaeldamelio7114 ай бұрын
Mid controls are a MUST.
@ozziejim84722 ай бұрын
Absolutely!
@CaptDavesSportfishing4 ай бұрын
it actually turns out that the lightning elite is a knockoff of the real lightning made in Taiwan which is the one you have with the silver pocket clip. the original lightning is so much better then the lightning elite. not all lightnings are created equal
@harleydave23164 ай бұрын
I was not aware of that. Interesting
@austynchavalia4 ай бұрын
Is it worth the money to upgrade a 103 to a 110.
@actuallyitskevin4 ай бұрын
Those bars are buck-horns, and they're awesome. I'm sure you've tossed them by now.
@Peter-9762 ай бұрын
They're not Buckhorns, they're pullbacks and the standard bar for that model.
@mikegeary86234 ай бұрын
My wife just bought a rocker c with these and i am disappointed in the sound, but just curious who have do this and did you have any issues on the 96 fuel injection,? Thank you. Yes i know its an older video
@mikegeary86234 ай бұрын
I ripped out vance and hines baffles and installed big city thunder monster baffles yesterday. Sounds a lot better. Those of you that want to rip out factory baffles the top is a bitch get a piece of metal bend the end shove it in hook on to it and pound the pipe with a rubber mallet. If anyone decides they want to install BCT monsters hit me up I'll help.
@johnford37614 ай бұрын
Still have these bars? How are they holding up?
@harleydave23164 ай бұрын
I dont have this bike anymore but use KST on 2 of my others and love them.
@moemolina84674 ай бұрын
Does it light up at night?
@WV_General3046 ай бұрын
What were your numbers ?
@markgraves94296 ай бұрын
Sounds like it runs smooth as hell
@Biggun4546 ай бұрын
Look nice - Use a small socket not a screwdriver - easy then.
@Hellpriest_13136 ай бұрын
Where did ya get the sissy bar? I'm riding an 05 wide glide and can't find one that fits.
@harleydave23166 ай бұрын
I got this one off Amazon.
@ikec40217 ай бұрын
Great family. The mom seems so sweet i bet she a awesome mom to. That son pulled a amazing move getting that.
@TheRoguelement7 ай бұрын
Ummm did you say Springer front end and it's gonna be cool ????????? Umm sorry bro maybe 40 yrs ago a springer on a sportster would have been considered cool but today .. NOT.. Why just go with a 3 degree rake with a 4 inch over and some risers and drag bars now that would look cool .. and still ride half way decent ...
@harleydave23167 ай бұрын
I don't have this bike anymore but thanks for watching.
@mrtitsmigee3 ай бұрын
Lmao what a butthurt
@justinharlick56887 ай бұрын
What slipons are those
@Webberdock7 ай бұрын
Good video, just no body explane to how check cam bearing condition and why it must be replaced?
@cj81722 ай бұрын
If they are INA bearings...they need to be replaced with Torrington (Koyo) bearings asap
@dennisyoung463119 күн бұрын
As in, “the loads imposed by the camshafts are sufficient to want the increased capacity of a *full complement/crowded roller* bearing - one where there is no cage separating the rollers/needles.” Been playing with these bearings since the late eighties.
@ToiletFinger8 ай бұрын
Did you put Gasket sealer from where the muffler meets the bike or only where muffler pieces meet each other?
@Banman6508 ай бұрын
Nice bike, What wheels are these ?
@harleydave23168 ай бұрын
stock
@adamrobles77488 ай бұрын
Awesome Bike
@wtf01018 ай бұрын
Strong earth magnet works good
@nickmartin70248 ай бұрын
How did you tune it ?
@harleydave23168 ай бұрын
Using the right sized jets
@daniellane54839 ай бұрын
Coolest bike they've made imo👍
@wooddawg48689 ай бұрын
Why does HD continue to install these INA bearings knowing they're not robust? Why is the question when all they have to do is use what everyone else uses when they upgrade their cam chest with an S&S or Fueling cam chest kit, we all know bearing replacement is MANDATORY because of this but it makes no sense. I have a 2017 Street Glide Special 107, I just installed a 475 cam chest kit in it from S&S motors, and the new bearing was in the kit, I figured I would upgrade since I now have 22k on the motor here in 2023
@Mike_The_Hog_A_Nator9 ай бұрын
I want someone to hear that noise when I'm using mine in a self-defense situation, which is very rare. For when I'm out saltwater fishing? Capt. Dave has a video showing what to polish (the tract) where to add oil & not add oil & the same with silicone spray. It'll make a $20 OTF feel & sound like a $400 OTF. 🤟
@harleydave23169 ай бұрын
I'm familiar with his channel and he's a good KZfaqr. My video demonstrates how to remove the spring 'twang' as Capt Dave calls it and he has a video showing the exact same method in his "sos otf knife - spring twang returned" video. Thanks for watching!
@ridewithme342810 ай бұрын
Nice bike! Unless they changed something on your year though they aren’t stock controls. My 09 FXDC has mids from factory
@mathewalagna541910 ай бұрын
Great video. INA is the manufacturer and it is a caged bearing. The Torrington bearing is a full compliment. (caged are cheaper bearings, we used them in pumps all the time) Would be nice to know the tool numbers or where you got the runout base.