Thank you so much! Our 7 year old Samsung fridge just did this today. We didn’t have as much ice buildup as you but getting rid of what we did have fixed the problem

How did dispose of the palms? I know they are so sharp and probably heavy. Also, where did you take them?

Thank u this made it so easy!

Thank you for this. It worked out pretty good. Its a car I dont much care for so this will buy me time till I upgrade my car. But again it worked pretty well.

Thanks

Great idea and cracking job. Thanks for sharing this pal 👍🏻 🇬🇧

Does anybody have a PDF of the instruction book?

#goodbyeSamsung

Thank you. What a pain in the ass, I just cleaned it of course so should of taken the opportunity then -_-

So helpful! Exactly my issue. Thanks for being so thorough.

thanks for the video, it helped

Isn’t there a forced defrost without all this

I cant find this model in Canada, any Canadians here?

Great video 👍🏾

Would this be enough to hide a crack from a safety check to pass safety? Maybe show up with a dirty windshield after the repair would help conceal it better 😬

Good video! Helped me and my pap put together my daughter’s😁 thank you!!!

I'm having this exact same maddening problem right now. Thanks a lot for taking the time and effort to make this video and explain to us laymen what's up

After a car wash, my electrical system went nuts. The car wouldn’t turn off, although the vehicle ran fine. $18k later I have replaced sunroof seals, cleaned drains, replaced wiring harnesses and new carpet kit. Stay on top of this folks

Thank you, great instructions. The one I got today changed the handles to the color of the screws and don't have to force it.

Thanks man ! you are a lifesaver ! i was trying to figure out where this water is coming from specially that its very close to a fuse box !

How far does it stick out of the wall externally, basically from the top rail to the back of the unit? I have a walkway right outside of the window. It would be ok if it does not get into the way too much. Thanks!

Also some heat helps , either A)light torch, quick passes, B) or a heat gun, if you’re close to power outlets Thanks for a video!!

thanks for sparing me the chore of reading the manual- well done!

Had the issue and moved everything from the back of the shelves to the front, the problem went away overnight so maybe a circulation problem

I really appreciate people like you who post informative, easy-to-understand videos. After trying to read through the owner's manual, this video was a godsend!

So did it work? Did it stop the crack from growing?

Thanks for the helpful video. Explained it very well :)

Yal-yak-

Great video! Thanks for sharing, I just bought a used 2011 Town and Country L just like this and the same problem. I found you don't even have to remove the battery, but probably should disconnect one of the terminals for the battery to be safe. I also found when I went to put pin 7 into 11, there was no wire and the pin hole seemed to be sealed. If you push hard I guess it will break through the plastic. Maybe there is a better way for that, like a tool with a small sharp icepick like end or a little drill/bit. After that everything went well. Except when I went to turn on the van and there was no power, found that a connector under the TPIM unit had come loose when I lifted it up. Make sure ALL connectors are tight and locked before putting the TPIM back on. Everything worked great after that. Thanks so much for this! Where do I send $$ :-) you saved me a mechanic trip and you also showed me what NOT to do haha ;-).

Had this same issue. Got real good at taking it apart and defrosting it. No help from Samsung so trashed it out for a new LG. Almost 2 years now and no issues. No more Samsung for us.

awesome, I'm doing the same job

If i purchased the U-Shape fancy one.. can it only be installed on a window that opened up and down? What if the window opened side to side instead?

I hate doing this and i have done it many times over the last 3 decades,lol,those springs are unforgiving.

In my experience, starter is the issue. For some reason, honda starters won't even click. Push button or key, no click. I change starters and no more issues. In my experience, you did right. Hopefully, your issue is solved. And yes, starters are pain to change in civic.

Worked good for me had about a half foot crack and chip...the trick I used was my wifes toy...as I put the resin in she was in the inside of the car and her her egg in a sock against the crack of the windshield. The vibrations from the sock egg vibrated the windshield enough so the resin would go into the crack. Then let it dry in the garage for two hours...then pulled it out in direct sun to let it bake for an hour..back in the garage let it cool down then scraped it you hardly can see it now...

Nice vid. I always leave the spring alone for a few mins to fully relax any remaining energy that might be left when lowering. Also a good idea to leave the strut when removing/installing a spring so when removing or installing, if it slips, you have somewhat a shield for the spring to hit before it flys out at you. Done this many times

58 pounds! Soo, that doesn't need a support bracket?

Thank you!

Thanks for this video. I’m doing these LCAs, lowering springs, caster camber plates, and a bump steer kit on my 88 GT. Do you think it makes sense to start with removing the caliper, like you did here? I watched another video that where they don’t remove the caliper and it suggested separating the spindle from the control arm with a hammer. That seems…odd, especially since I’m doing it without a lift. I’m not sure what order to go in as far as removing the old control arm.

i have a 2019 honda civic sport touring & it has turbo and when i start it, it cranks for 2-3 seconds sometimes and sometimes it starts right away is that normal?

Did the crack grow more???

Thanks brother for this awesome video!

what a terrible design flaw

I don’t know what you have been smoking but this product just doesn’t work!!!!!!!

Great video. Very helpful thank you

Same boat myself, Crack is getting longer day by day, so come tomorrow bright and early doing this. Thanks for the vid.

One very important question is do you know JESUS CHRIST AS YOUR PERSONAL LORD AND SAVIOR?

I cannot thank you enough for this video! As a first time diy battery replacer, this was my saving grace!

Thanks for the guide, piece of cake following your instructions. Odd thing was my smartkey stopped working after changing the Honda battery with the Interstate AGM version from Costco. The center display said power was lost and to hold power button down to reset the alarm system. None of the radio presets or other infotainment was lost. Any idea how to get smartkey working again? I can manually unlock with the key and hold the keyfob to the button to start it but would be nice to get remote functions working again. Thanks

Good video, I'm about to do my '89s as well!