It came on the truck I wish I could find it online but I don't see it anywhere
@scootermaniac272816 күн бұрын
What kinda or Brand of mirror are you using?
@TheJimmysGarage15 күн бұрын
Mirrors - amzn.to/49rr3Lb
@scootermaniac272815 күн бұрын
Sweet thanks! How hard was it to install the head lights I have the same truck and I am looking at buying them.
@TheJimmysGarage15 күн бұрын
@@scootermaniac2728 I followed this guide, plug and play if you use the adapters in my description. www.riffraffdiesel.com/content/RESOURCES/Riffraff_Diesel_05-07_Headlight_Instructions.pdf
@scootermaniac272815 күн бұрын
Sweet thank you!
@aellis1521 күн бұрын
Did you get this recently? Also how much and where from?
@TheJimmysGarage21 күн бұрын
I got it when the video was posted, August 8, 2023. It was from my Moomba Dealer, Club Royale Boat sales. 248.681.9100. You can even mention that you want the same engine tray that Jimmy got for his 2014 Mojo 2.5. This is the part # 119402 from Moomba.
@gottatry905724 күн бұрын
Your video is what made me decide on these lights for my wife’s 2002 Superduty. I have morimoto on my Dodge and have to say I like the quality of these Alpha Rex very much! Drl and turn signals work well, however only the upper projector is illuminating. When I activate the trucks high beams, the upper projector changes. In your video it looks like both upper and lower projectors illuminate. Did you experience this at all?
@TheJimmysGarage23 күн бұрын
The upper projector is the Hi and Low beam. The lower projector is just a running light with very low power led bulb.
@313cbrown26 күн бұрын
I have the alky funny car. I blew the gears 3 times because of the lexan body. I took it off and put a tyco body on and haven't had any problems since I swapped them
@UnMeDiKaT3d26 күн бұрын
Did you have to rewire the blinker pigtails? Because mine ain't plugging into the rex supplied plug in the housing it's not much different but different enough.. i also have an 02 but upgraded to the 05 panel and lights everything has been plug and play til now.. also you tapped into fuse 8? For the start up? Looking at also running that
@TheJimmysGarage23 күн бұрын
I used these - amzn.to/48JEDdw and didn't have to do anything with blinkers, was all plug and play.
@TheJimmysGarage23 күн бұрын
For the running lights to stay on when the truck is switched on I tapped fuse 8.
@UnMeDiKaT3d23 күн бұрын
@@TheJimmysGarage that's so weird in an 02? I had to splice the newer plug from my harness to fit i got that figured out i was just left with the running lights so thanks dude!! I'll probably come back to this whenever i get around to my roof lights cuz mine don't work rn and seeing yours do the start up flash is sexy 😂😂
@TheJimmysGarage23 күн бұрын
@@UnMeDiKaT3d So with the plug and play harness from amazon you still had to splice your headlights in?
@UnMeDiKaT3d23 күн бұрын
@@TheJimmysGarage ya at least the blinker plug i did it was way different than what i got with the headlight assembly i thought that was weird considering both our trucks are 02s lol
@mountebank520729 күн бұрын
Stumbled across this, sounds mean asf
@TheJimmysGarage28 күн бұрын
Thanks!
@CysMix1Ай бұрын
Howd you tap into the wiring for start up sequence
@TheJimmysGarageАй бұрын
There is nothing to tap for that, when you turn your headlights on they the do the startup sequence. The pro series does not do this, it must be Luxx series or Nova Series
@louiecanАй бұрын
Where did you tap in the harness for drl animation with unlock? I have a 2003 7.3. I per alpharex tapped into 12 obs2 cigar lighter and they are always on?
@TheJimmysGarageАй бұрын
Hey, I didn't tap anything but the running light wire to switched 12v.
@JeffWalker84Ай бұрын
Sweet video man! If you don't mind a suggestion, I would recommend rolling your bars back quite a bit. It looks like you're getting a lot of front end tuck because of too much weight on the front end. If you look at your bike from the side, the angle of your handlebars should be in line with your fork angle (or slightly angled backward). That will help a ton
@TheJimmysGarageАй бұрын
Interesting thanks, yea I haven't touched the bike other than ecu, so the dealer set it up wrong I guess?
@KevGАй бұрын
Felt like I was there🤝🏼🤝🏼great vid homie
@TheJimmysGarageАй бұрын
Should join us!
@CameronPritchard-ll5gqАй бұрын
I was there 😂
@kevinmiracle8233Ай бұрын
great vid man! memories came flashing back when i was kid and raced out there! track has changed a little.. Maybe i'll bring my GasGas Ex250F out there and spin a few laps this year!
@TheJimmysGarageАй бұрын
Always a good time, Baja was awesome!
@hkycoach9616Ай бұрын
did you install yourself. if so do you offer install service locally
@TheJimmysGarageАй бұрын
Yes I installed myself. What boat do you have and what area are you in?
@hkycoach9616Ай бұрын
@@TheJimmysGarage 2014 moomba mondo
@hkycoach9616Ай бұрын
@@TheJimmysGarage sorry Brighton
@TheJimmysGarageАй бұрын
@@hkycoach9616it's a pretty easy install on that boat. I'm in Royal oak, but if you have the factory Sony radio it's an easy install. Club Royale in Waterford could install it mentioned my name or show them this video.
@dawsonsnapp5553Ай бұрын
How did you attach the controller to your boat?
@youknoweverything7643Ай бұрын
I also use them as cheap drag cars to do ho drag racing with ny buddies so i dknt havr my expensive nice ho scale purpose built drag cars cause they so fast they will go flying off the track while drag racing if not careful and plus i dont like putting laps on my expensive purpose built ho cars i use for money races, pink slip races and cahs days we do
@youknoweverything7643Ай бұрын
Or do what i do the new scaletrix micros use a 4 lane track and run them together as a two lane at 9 volts they fly
@codymitchell4682Ай бұрын
Beautiful truck man. Where did u get ur cab lights and mirrors from
@TheJimmysGarageАй бұрын
Cab lights are just smoked lense - amzn.to/3J54r8A and then I am running the brightest bulbts around from deautokey.com/
@TheJimmysGarageАй бұрын
Mirrors - amzn.to/49rr3Lb and I changed the side markers out for - after some trial and error these last - amzn.to/3J3Zb5i
@KobieeBryant2 ай бұрын
What’s funny is the ppl that have these cars and the chargers drive so damn slow and around my area most of em is ages 60+
@TheJimmysGarage2 ай бұрын
Haha that's pretty funny, alot of young people own these and chargers around Michigan.
@KobieeBryant2 ай бұрын
@@TheJimmysGarage man I live in Delaware and it’s mostly old folks with em and they drive em as if the riding beach cruisers
@rayjavier12512 ай бұрын
do you HAVE to add the black box to in order to have installed?
@TheJimmysGarage2 ай бұрын
Yes the black box IS the radio. The screen/controller is basically just a "wired remote"
@TheJimmysGarage2 ай бұрын
All the stereo connections are made to the black box.
@marcjohnson51482 ай бұрын
That cloth at the wall seems to need a pillow back there as well.
@TheJimmysGarage2 ай бұрын
Yea we struggled with it, we had a pillow but it ripped the wing off some of the auto world cars
@marcjohnson51482 ай бұрын
Viper!!!!
@aaronpedersen84462 ай бұрын
Hey mate I've got a 01 super in Australia can ypu make these fit into the 01 plastic nose cone? Looks like alot needs to be ground out. I was just going to fit the 05 plastic nose front
@TheJimmysGarage2 ай бұрын
Hey the truck in the video is a 2002 just have to dremel some of the plastic core support to fit.
@scottpinardi49912 ай бұрын
That looks beautiful that is by far the best light I’ve seen for that year
@TheJimmysGarage2 ай бұрын
They are amazing, no better option for these trucks.
@scottpinardi49912 ай бұрын
@@TheJimmysGarage I was going to do a nose swap 2015, not anymore. I love the look of the smaller grill and those lights together. you definitely know it’s a Ford front end but it has that little hint of a second GEN look to it.
@kennygibbs96273 ай бұрын
That's cool 😎 dude's 😉
@TheJimmysGarage2 ай бұрын
Thanks!
@TJ-pn4sp3 ай бұрын
💔 'promosm'
@slotcardude683 ай бұрын
Love the Alfa!!! Subbed your channel!
@TheJimmysGarage3 ай бұрын
Right back at you!
@jarozita27153 ай бұрын
Great video. Thanks!
@TheJimmysGarage3 ай бұрын
Thank, I appreciate it!
@Dyno053 ай бұрын
I was just looking at these cars. I didn’t realize they were rated at 9 volts. I was looking at them because I have an older micro scalextric that moves out on my track so I was looking at more. I’m not sure what the voltage rating of the one I have is. I think it’s the older version though. Another fast cheap car are the Tyco HPX2. They are like the 440x2 but only 3 ohm I believe and were meant to run in the battery powered tracks. I have a stock Lifelike T chassis that rips also. It destroys the Mega G Plus cars. I like the catch curtain you made. That’s a great idea.
@TheJimmysGarage3 ай бұрын
I have yet to have anyone bring over a tyco HPX2 yet but I would love to see one. So far the Viper V1 Spec and the Viper V1 alky funny car have been the fastest. We have a few of the Life Like T-Chassis which are some of the faster mass produced cars forsure! Mega G+ seem to just be very normal cars but they have very nice bodies! The Scalextric micros for the money come very close to the Viper V1 Spec cars in this short 13 foot strip.
@Dyno053 ай бұрын
I haven’t been involved with drag racing HO cars for a while. I got a renewed interest because I have a young son now and it’s easy for him to control the cars then on my road course. I was at the point that I was winding my own pancake motors for Thunder Jets and doing full drag builds. We had a full scale quarter running 24 volts. No timing just lights. It was fun. I feel myself being drawn back in. I will post a link to two cars I built a while back. I will check out the Viper cars. I’m not familiar with those.
@@Dyno05 Sounds like a sweet setup! Yes we run 22 or 24 volts on this track, the cars run great. The Viper cars are great, USA made. My Alky Funny car from Viper is a 2.4ohm arm car.
@alexisjrodriguezz18964 ай бұрын
Dónde adquiriste la salpicadera frontal?
@TheJimmysGarage4 ай бұрын
amzn.to/49aUC46 and you just redrill the holes.
@jwmoor4 ай бұрын
A little modified power system? Go HO drag racing.
@TheJimmysGarage4 ай бұрын
Yea here is my power setup! kzfaq.info/get/bejne/b5-Bn7CJ2bLceXk.html
@13725137254 ай бұрын
I have a 2004 F550 and have been looking for a grill and headlight combination. I saw your video last monday and started cutting my headlight support by Friday. It was an easy install, but I have two questions. When you hooked up the gray daytime running light wire, what fuse location did you use? My daytime running light fuse location is in the fuse block under the steering wheel. My issue is, that fuse is always hot, so as soon as I made the connection and installed the fuse the white rope light or C's "[ ]" come on and stay on even when I have my keys in my pocket and the vehicle is not running. My high beams also do not work at all, and the low beams have a constant flicker. 1000 times a min. I checked my batteries and charging system, that was all good. I pulled everything back apart, reinstalled all my factory lights, and everything worked perfectly. Put everything back to the new lights, no change... Flickering and no high beams - so frustrated!!! Yours looks killer... any help would be greatly appreciated!
@TheJimmysGarage4 ай бұрын
For the running light wire tap you need to find a fuse that is 12v switched power only with ignition on. I believe I tapped mine into the radio fuse which I think is fuse 8 but mine is an 02. It sounds like a possible issue with your conversion harness that converts 04 to 05 wiring, you may have to swap a pin or something, the high beams use the same bulb but they open a cut off shield that gives more light on the road, so there isn't a second bulb for High beam rather when you flick your high beam a solenoid is activated to give more light on the road. The solenoid is mechanical so you should hear in in the headlight. As for flickering it could be a bad unit.
@13725137254 ай бұрын
Would you be able to send me a link to the 99-04 to 05-08 harness you purchased?
@TheJimmysGarage4 ай бұрын
@@1372513725 amzn.to/48JEDdw
@13725137254 ай бұрын
Yep! I received the same pigtails you sent me the link to, and everything is working as desined. Thank you for your time and help!
@TheJimmysGarage4 ай бұрын
Great news@@1372513725
@kiyalami84784 ай бұрын
how are ZR1 OEM NPP mufflers different than non-ZR1?
I wonder if they created those cars just a little larger so you would have to run their track if you wanted to run them on a road course, otherwise, they make great cheap drag cars
@TheJimmysGarage4 ай бұрын
Hmm you may be on to something about their size! But man what a good cheap drag car haha.
@slotvalleyracing4 ай бұрын
Nice collection!
@TheJimmysGarage4 ай бұрын
Thanks! It's gettin time for a real track timing system!
@brenthogan71794 ай бұрын
sounds great man. trading my 5.0 in for a 17 z06 next week!
@alexanderkinghorn93394 ай бұрын
I’m trying to figure out if I can set/wire the pro’s so that the light tubes stay on as amber. Did you notice anything different on the backside between the pro/lux? Alpharex says some of there models have the ability to “set” there lights to amber, not sure what that means though?
@TheJimmysGarage4 ай бұрын
They lights are plug and play, they utilize the factory blinker signal to initiate the orange. The white comes on when running lights come on. There is an additional tap for a brighter white running light that is optional but I did connect this to 12v ignition so even in the day time I have the white light on. I would think if you swapped the blinker wire with the running light wire and run orange all the time.
@slotcardude684 ай бұрын
Keep those slotcar videos coming!!!! Love the H0 Drag Strip!!!!
@TheJimmysGarage4 ай бұрын
Will do! They are a ton of fun, thanks!
@williammyers55935 ай бұрын
Dammit, why did I watch this video? Edit just order some
Love the video. What's the steering wheel are you running?
@TheJimmysGarage6 ай бұрын
Handkraftd is the brand
@canadianfox30996 ай бұрын
This company needs to make a grill with a led bar that match these lights that travel the full 360° oval of the grill.
@larryhudson155Ай бұрын
Underrated comment for sure. I agree it would top it off
@CysMix128 күн бұрын
You dont need to light up the whole damn word for God sake. There's such a thing as too many lights
@Yourvideosaretrash7 ай бұрын
when are we gonna get more 96' yz250 updates?
@TheJimmysGarage7 ай бұрын
I need to do a new garage update it's been a while, I traded the yz for a 04 400ex kzfaq.info/get/bejne/oM58d6WflpOvgYE.htmlsi=LWJUEh-Tm_DdtTE0 Took the 400ex to the dunes and quads just weren't for me so then I traded the quad for this crf.
@feeltheburntk98938 ай бұрын
I’ve had mine installed for about half a year now on my 99 7.3 and decided not to mess with the additional parking light harness since ours don’t have a parking lamp fuse. Did you install your additional harness? If so where did you tap into?
@TheJimmysGarage7 ай бұрын
Yea just have to use an add a fuse- tap it to a 12v key on source. I believe I tapped mine into the radio fuse which I think is fuse 8. Worth it forsure, white DRLs come on when truck is on.
@KevG8 ай бұрын
The fans want longer vlogs‼️
@TheJimmysGarage8 ай бұрын
I guess I will have to give the fans what they want
@KevG8 ай бұрын
@@TheJimmysGarage wakeboat vlogs let’s goooo
@THETERPZ8 ай бұрын
The 4 projector version is nicer. At least if I would to spend 800.00
@TheJimmysGarage8 ай бұрын
That version is $1200
@matthewsayewich54468 ай бұрын
Right on! Exactly what I needed to hear. Will be my next upgrade
@TheJimmysGarage8 ай бұрын
You will love this radio!
@scottygregory85889 ай бұрын
That's a Chevy rumble that car means business
@rylieazevedo23719 ай бұрын
I got these for my truck and love them but we’re you able to get the blinkers to work normal instead of going fast if so what did you do?
@TheJimmysGarage9 ай бұрын
Yes my blinkers do not fast blink, I'm not sure if my truck has resistors installed or not because it came with led tail lights already. I assumed these headlights do not fast blink because they have a resistor built in but maybe my assumption was wrong?
@rylieazevedo23719 ай бұрын
@@TheJimmysGarage I have led taillights as well and never had the fast blinker as well but when I installed the lights that when it start. Just wondering if you had that problem also.
@TheJimmysGarage9 ай бұрын
T@@rylieazevedo2371 There is probably a problem. I just checked with my buddy who has a set, his truck is bone stock and his do not fast blink.
@rylieazevedo23719 ай бұрын
@@TheJimmysGarage okay I’ll have to look into it. I’m sure it’s something the previous owner(s) have done. The hold wiring for the previous lights was a mess. Thank you for the help I appreciate it.
@louiecan2 ай бұрын
New LED blinker relay. I did for my fast blink. from AutoZone, $16 I think. I have the packaging with the part number if you need it. It was a pain to get to.
@mrtopramen10 ай бұрын
Really insightful. I’ve been confused if the lower bulb was a high beam and required another bulb or not, but this sorts that out. I do like the idea of being able to swap bulbs vs the entire headlight if a bulb goes out. It would be nice to get that lower light here to match. Someone else on KZfaq said you could disconnect a wire to just turn that halogen off. I wasn’t sure exactly what he was talking about until now.
@2010Basepay201010 ай бұрын
Nice- Are you running stock Converter? my understanding is with the 8 and 10 speeds you can do alot of tunning.
@TheJimmysGarage10 ай бұрын
It's a manual..
@brandon2233310 ай бұрын
Man I’m having a hard time trying to convince myself to spend 750 on these and I think your vid may have done it haha. Those suckers are sexy where did you tap into for the led bar