3 ай бұрын
4 ай бұрын
5 ай бұрын
Пікірлер
@ridetheyoshi 2 сағат бұрын
Do you guys sell the retrofit brackets by themselves?
@ctaylor331 3 сағат бұрын
i’ve got 4 of the screw in type breathers on my retrofit now plus the two that came on the housing. going to give these a try as i’m still getting some condensation on the lens of one of my headlights
@Moto_Adventure_Man 22 сағат бұрын
ok I need help... I am doing this install in a 2013 OB w/ HK system, and the CANBUS harness, but can't for the life of me get the amp to power on. What is the amp power wire in the harness? How do you get 12v to it?
@thew1neguy Күн бұрын
I wish your transition music was a little louder. I can still hear out of my left ear
@ernest2641 5 күн бұрын
Would 18 Gauge wire work fine if Im powering 360 ws2812b 5050 Led's?
@NextLevelNeo 5 күн бұрын
Yes, 18awg is a good match for that. Keep in mind you'll need 5v inverters
@ernest2641 4 күн бұрын
@@NextLevelNeo Thank you for responding I know its an older video.. Do you know what the max output in Amps you can get out of the "left side" and "right side" of the controller? I cant seem to get an answer from the owner of blueghozt. currently I have 180 ws2812b's on each side, and Im trying to find out if I can power those straight off the controller or if Im gonna need to route power "around" the controller and bypass it???
@MrFathead 6 күн бұрын
Are these weather proof as they are? Could I just use them without a housing?
@NextLevelNeo 6 күн бұрын
They are definitely not. Only our high beam projectors are suitable as is outside of a housing
@badtoro 7 күн бұрын
It's 2.4 not 2.5 wifi
@ivanbarton4475 7 күн бұрын
Thanks, this is thw video that I needed. I thought about using diodes but didn't know which ones to use.
@ivanbarton4475 7 күн бұрын
Can't get to work correctly the Hi-Lo function.
@WaschyNumber1 9 күн бұрын
Nice, can this hole metal part with the attachment to the motor be bought completely or how is it build. 🤔
@forrestray2439 12 күн бұрын
No response to anyone. What gives
@djseb.official 12 күн бұрын
how do you separate the park/brake/turn/rev segments/areas when running addressable leds? do you require multiple controllers/sequencers?
@NextLevelNeo 12 күн бұрын
Are you familiar with addressable leds and the blueghozt controller? I belive I do a little demo at the end of this video and I have a ton of other videos going into detail the amazing benefits a smart led can provide.
@djseb.official 12 күн бұрын
@@NextLevelNeo if say i have three separate main areas park/brake, turn signal and reverse. do i still wire all leds in series? one area after another?
@NextLevelNeo 12 күн бұрын
Yes, the bigger factor is sections. 5mm addressable builds are advanced addressable. If you haven't worked with addressable or ghozt before then be prepared for a lot of frustration.
@djseb.official 12 күн бұрын
@@NextLevelNeo i guess what im really trying to undestand is how does the module figure out what area/section to power up based on the different inputs it sees? or is that something that can be defined via programming?
@NextLevelNeo 12 күн бұрын
Yes, you will set sections in the app and define which section does what. But that is a really simplified explanation. I cover in more detail in a lot of my videos. Think of my tutorial section on KZfaq as a college course on addressable. If you just watch a few videos you won't have the full picture.
@FMuscleZ28 12 күн бұрын
The actual video starts at 8:08...
@bobm4787 15 күн бұрын
If you are placing it on your soffit you will find the light will sometimes land at a groove. Just place a fastener on both sides of the light. Keep the wire straight and it will look much clearer.
@bobm4787 15 күн бұрын
I just installed my Govee lights. THEY ARE AWESOME. I will say if you live in Florida like me, you will need to use the anchors. I snapped a chock line and it made installation easier NOT FASTER.
@Brooclin 15 күн бұрын
хуйня какаето, Phanteks NV7 Premium DRGB Kit - Black лучше
@steezzyari9226 16 күн бұрын
Love these please keep making them
@tekeguy68 17 күн бұрын
Been having a hard time finding honest and informative videos dealing with the different breather options. I've had a terrible time with depo headlights on my BMW since the day I got them. The first time it collected so much water that there was literally about an inch of standing water in them. I've cracked and resealed numerous times. This last time lasted a while but I'm starting to see light condensation again but I'm starting to think it may be more related to warmer weather then rain/washing. I need to try these because even removing the headlight is a pain.
@NextLevelNeo 17 күн бұрын
Standing water is usually a leak, I'm not sure breather patches will help with that. Make sure there are no holes anywhere on the light.
@tekeguy68 17 күн бұрын
@@NextLevelNeo Yeah, I resolved the standing water the first time. For the price, Depo's are pieces of garbage so I re-jiggered some of the seals, rear cap and bottom drain/weep vent (which wasn't even drilled). It's just been condensation the couple times since then but it still bugs me. They do get pretty warm because I have always running halos so I think getting them some breathability will solve what I have going on now.
@NextLevelNeo 17 күн бұрын
yea, in that case the breathers should definitely help. if you still have issues after that add a couple desiccant packs, i dont like to use them cause they can break open and make a mess but sometimes you have to.
@tekeguy68 17 күн бұрын
@@NextLevelNeo Yeah I'm increasingly leaning towards desiccant packs also because I want to eliminate dealing with these headlights ever again. I have lots of options from my filament dry boxes for my 3d printers so I'll decide once the patches arrive.
@jeromeevangelista3404 18 күн бұрын
Can You make sharingan eyes?
@NextLevelNeo 17 күн бұрын
we can yes.
@xavierlipscomb2000 19 күн бұрын
Is it possible to achieve the galaxy effect without having even amount of LEDS in each row?
@NextLevelNeo 19 күн бұрын
It depends on the layout. Most panels aren't perfectly square but a round shape won't easily do it
@AndyRC 23 күн бұрын
I have a k1 that I bought on a huge sale a while back. I was ok with having to fiddle with it a bit though. I leveled the bed with shims, swapped out the plate for a pei one, installed the camera, and rooted it. I am running full Klipper with all the options now and it is by far my best printer. I have 4 printers in all and don't touch my other 3 now. I have over 1000 hours on my k1 with 0 issues and only replaced the nozzle. I love this thing and the K1C is just a better version in my opinion. I would not upgrade mind you as there are not enough changes but I would buy one if I didn't have a k1. I will say the competition is fierce now though. With the flashforge 5m and the qidi Q1 pro out there.
@ServTech1337 14 күн бұрын
problem is quality control .. not the printer itself
@shastrimaharaj1846 24 күн бұрын
Are there any other brand of module can be used to give the same function
@NextLevelNeo 24 күн бұрын
We sell a controller that has drivers that add a drl startup and sequential turns but they are set. Blueghozt is the only controller with anywhere near this level of control.
@maxstuckert 24 күн бұрын
Bought some tail lights that came wired with a blueghozt 2.0 that I hooked up to my battery. I want to wire them to a switch through that external input. Is it just power wire from external input to switch then power wire from switch to battery? Don’t have the most experience wiring but I want to be able to toggle a show mode without having to open the app every time.
@NextLevelNeo 24 күн бұрын
That's pretty much it. The ghozt just needs a 12v input to turn shows on. A switch inline makes it easy to turn on and off.
@jos4564 27 күн бұрын
Great video but what is the difference between Sugon A9 anf Aifen A9 pro? Is there any difference at all?
@thedealguy5359 27 күн бұрын
Where can i buy these? Im really frickin' mad now. I cannot find these projector headlights with multi color and function anywhere online....... I have got to get these immediately.
@NextLevelNeo 27 күн бұрын
Reach out to us at Www.bragginlightz.com and we can get you a set.
@CSltz 29 күн бұрын
Driveway parking only. Nice looking truck. Wish mine had the longer bed. There’s a new business venture 5.5 =6.+.
@Bythirteen Ай бұрын
I like the door handles, I cannot lie. :)
@emyliaevans Ай бұрын
Looks like shit
@uptoolate65 Ай бұрын
How different of a hookup is it if the system has power switches?
@NextLevelNeo Ай бұрын
You just flip the diodes 180 degrees
@dropec3465 Ай бұрын
How can I buy from you
@NextLevelNeo Ай бұрын
Reach out at Www.bragginlightz.com
@joshuaramkissoon4987 Ай бұрын
FYI - you can only splice up to 3
@Alex-Ogando Ай бұрын
Where can i bay info ℹ️ place
@Racio00 Ай бұрын
Have you solve the hot end problem? Even the heatbed replacement?
@NextLevelNeo Ай бұрын
I've not had any issues on mine so far.
@Racio00 Ай бұрын
@@NextLevelNeo have you tried replacing the nozzle already?
@NextLevelNeo Ай бұрын
Mine works great, I don't see a need to mess with the printer if it still does it's job as is. For me it's a tool more than a toy so I just need it to work when I need it. Nozzles and heat beds are for speed which isn't as important to me as just getting reliable results which it does great so far.
@Racio00 Ай бұрын
@@NextLevelNeo is it true that it’s that difficult to find a nozzle replacement?
@NextLevelNeo Ай бұрын
Actually no, I see a lot of people on Facebook groups swapping in nozzles from micro Swiss with good results. The k1c fixed a lot of the issues the k1 saw and there is a 2.0 version coming that will no doubt improve the design even more.
@dubmedia3600 Ай бұрын
How can i get this done to mine where can i find yall?
@NextLevelNeo Ай бұрын
Www.bragginlightz.com
@davidvaldez4904 Ай бұрын
Hi, I installed your power saver and I’m having a couple of issues. . 1. Is the Blueghozt module suppose to stay on at all time’s regardless, even when the car is off? 2. I’m using the blueghozt plus and decided to only use the one wire trigger method but on the lightning bolt section it doesn’t show any amperage.and at times I’m also getting a yellow message at the top of the app saying “connect power to 12v pin” 3. When using one wire trigger method does the blueghozt need to be powered at the sw+ and ground for it to detect the trigger from the power saver, considering those switches are considered external? Because if so then technically it wouldn’t be a one wire method then, no? 4. Right now the A button does trigger but just a random set of colors on the tail lights but no shows and the B button isn’t doing anything
@NextLevelNeo Ай бұрын
1. with this wiring layout the blueghozt will stay on, the controller alone only draws 0.03amps so this does not generally present a problem. 2. Did you connect the power to the 12v switch power input? 3. Yes, you need to run 12v power to the sw+ since that is not connected to the main board power. Ground is not needed, only needed on the main ground. Its 1 wire to the battery saver trigger which i would consider a 1 wire method. Technically its still got a dozen wires running all over the place, this just cuts it down from 3 triggers to 1. 4. The A button triggers the EXT trigger on the ghozt, you still have to pin show modes to that trigger. i cover that in detail in this video along with many other questions that im sure you will have. kzfaq.info/get/bejne/jcqjacmj2pewfIk.html
@PedroTaverasJr-zz4iy Ай бұрын
Great video! Where do you buy or make the black board? I tried the site but i didn't see anything. Thanks
@NextLevelNeo Ай бұрын
Illumaesthetic was the go to but they are getting out of it. I am working on finding a good alternative, hopefully ill have more on that soon.
@PedroTaverasJr-zz4iy Ай бұрын
@@NextLevelNeo oh OK. How would I look for it? What's it called? Peg board?
@NextLevelNeo Ай бұрын
@PedroTaverasJr-zz4iy it's laser cut to size. Not something mass produced but rather something made to order. You will not find this stuff on Amazon
@larryledbetter2123 Ай бұрын
Do I have to wire in series to choose different zones ??
@NextLevelNeo Ай бұрын
This controller does not have the ability to control zones independently. You'll want the blueghozt for that feature.
@bulgarianicedtea7897 Ай бұрын
If your car has negative switched headlights, (Most Japanese cars from early 2000's) follow this guide guys! He does a really good job of explaining everything clearly and explains every part of the way. This is cheaper and better than any of the adapter harness's, which are really hard to find/determine which specific one you need for your car. I did this for a 2010 honda fit and most other Hondas from early 2000's would be the same. There's a comment in here about reducing the output slightly because of the diodes, I can say that I did notice it too but because the lights are so much better and brighter than the stock halogens it didn't matter to me. (Edit) Honda fits are positive switched headlights and this process will work fine you will just have to switch the orientation of the diodes.
@bulgarianicedtea7897 Ай бұрын
Another tip guys, keep your soldering iron hot and be as quick as you can with the diodes, these seem to bee extremely sturdy/ heavy duty but I have heard from other enthusiasts that they have ruined a couple of diodes by overheating them when soldering.
@kesipi4465 11 күн бұрын
what led you use? i have h1 sized projector, and i wanna do my fit to
@GETNYCEAUTO Ай бұрын
First in the World 💩💪💪💪💪 Dats what im talkin Boutttt
@thehornstore2755 Ай бұрын
Does this circuit harm the projector or any kind of an other issue?
@NextLevelNeo Ай бұрын
If done properly, no, it will not harm the projector or the car.
@thehornstore2755 Ай бұрын
Do we need to put a relay or something for safety or this works fine without relay too ?
@NextLevelNeo Ай бұрын
Generally no relay is necessary. But it would depend on the factory wiring gauge and wattage load of the projectors.
@thehornstore2755 Ай бұрын
@@NextLevelNeo okkk thanks
@descendinggod9740 Ай бұрын
You should offer this on your storepage. I would definitely get those over the Tri-Beam ones. I wanted to retain the OEM look and this totally fits the build I have in mind.
@NextLevelNeo Ай бұрын
I can build you a set, I need to do a lot of updates to the Braggin Lightz website, it gets neglected with everything else going on
@mayamanign Ай бұрын
What do you charge for this service? I have lenses that need etching. I'm on your site but I don't see anywhere where I can send you my lenses. Thanks I'd like this amazing effect on my factory projector lenses.
@NextLevelNeo Ай бұрын
We do etch lenses, they are currently $90 a pair.
@eduardolazaro9166 Ай бұрын
What size are the halos? If i were to but a another halo on the out side what side would it be onto the turbine?
@NextLevelNeo Ай бұрын
80mm for the front and 110mm for the back
@eduardolazaro9166 Ай бұрын
@NextLevelNeo thanks for the info. I'm really looking forward to buying some of your items in your shop
@JuanCMissingGears Ай бұрын
Looks super clean!!
@ridetheyoshi Ай бұрын
Build some custom headlights for the tow rig lol
@NextLevelNeo Ай бұрын
Already built the heads, tails soon and plenty more in the works.
@spyder9172 Ай бұрын
Great job 👏🏽 amazing very informative love the lights! Spyder
@HAMMER_2.2 Ай бұрын
Is there any chance you could offer some 3d printing services? Ive got a few parts for my project truck that will have to get 3d printed eventually. Would be cool to possibly hire the Lighting master himself if that ever becomes a possibility!
@NextLevelNeo Ай бұрын
Print yes, design not so much. I can print stuff easy enough but design work takes a bit of time depending on what it is and that can get really pricey.
@ridetheyoshi Ай бұрын
Are the factory LED boards with amber/white running lights brighter than the actual UCS2904 strips? I'd imagine they would be a bit brighter but of course they aren't going to have any show modes or customization options
@NextLevelNeo Ай бұрын
They were a little brighter but it wasn't much. The double row ucs did a great job.
@ridetheyoshi Ай бұрын
@@NextLevelNeo Totally understandable with the UCS. Absolutely enjoy your content and you taking your time to show and explain the process of this customization. Also letting people know how difficult it is to open some variations of permaseals. I always explain it to my customers with VLAND requests that it is extremely hard to open as well.
@NextLevelNeo Ай бұрын
@ridetheyoshi vland has mastered the worst permaseal. I'm sure it's helped a lot worth leaks but it sure does give retrofitters a headache.
@edwardsjohnson5387 Ай бұрын
Ill hire you to help walk me through wiring my led projectors.
@lkidloco91 Ай бұрын
You’re a beast !