Actually its designed for in and out gates. Full instructions on how to install for out swing gates.
@honeyg3589Ай бұрын
I don’t get it - this lock is on the inside of the garage, if I am understanding what I am seeing properly. Why would it need more than the slider piece instead of this additional lock code on the slider piece? How would the lock code do more (than the slider, by itself) to stop someone who is outside of the garage from entering?
@YARDLOCK_Ай бұрын
That is a very good question. Garage doors are one of the most commonly targeted places for home burglars. Now when we designed this particular Keyless Slider Lock we took it upon ourselves to do research into home burglary statistics. If a home gets broken into and they want to use the garage door as an exit point and maybe want to steel your car as well, our Keyless combination Lock will prevent that. If your garage door is forced opened from the outside, a regular slider lock purchased at your local hardware store would not be strong enough to prevent that. Our solid stainless steel slider is 8 times stronger then any other regular slider lock out on the market today. Combine that with solid steel casing that holds everything in place, it would virtually impossible to open. Our lock is also useful for the times you are away on vacation and need that extra bit of security for your home. How Often Do Homes Get Broken Into? Home break-ins are far more common in the United States than you might expect. The numbers may surprise you: Two-thirds of all burglaries are residential (Nationwide). A break-in occurs about every 15 seconds, which equates to 4,800 burglaries a day and 2.5 million burglaries per year (FBI). Contrary to popular belief, most break-ins occur during the daytime, with 62% happening between 9 a.m. and 3 p.m. (Nationwide). Burglars like to attack during the daytime because it’s when most homes are vacant. Home break-ins are generally very brief. With the majority lasting anywhere between 90 seconds to 12 minutes. However, the average time for a break-in is between eight and ten minutes (FBI). Hope I didn't bore anyone with all these statistics......... Stay safe and use Keyless Locks by YARDLOCK yardlock.com
@amyhuang77252 ай бұрын
I was so excited that the installation was done. After I changed the code, try to lock it. It doesn’t lock. Can’t move any numbers. Do you know why I can’t move all the numbers at all? Thank you
@YARDLOCK_Ай бұрын
Im really sorry for the delayed reply. If you can open the box, loosen the mounting screws. You may have over tighten the screws and distorted the box.
@harryfarr29354 ай бұрын
My latch is missing the centerpin so the latch and spring won't stay together. Can I get a replacement latch?
@YARDLOCK_4 ай бұрын
Hi, thanks for purchasing one of our YARDLOCK products. Please call 1-844-463-9459 and have your bill of sale ready for verification and pictures if necessary. Explain the problem and replacement parts you require.
@linuxuser29285 ай бұрын
If you can’t afford Google ads your products must suck. Reported.
@s33py_boi5 ай бұрын
😂
@YARDLOCK_5 ай бұрын
Hi from YARDLOCK. thanks for your comment. What makes you think we don’t use Google ad words? visit our website; yardlock.com
@johnhoffman35989 ай бұрын
I changed the combination closed cover now it will not open with either the factory set or the new combination?
@YARDLOCK_9 ай бұрын
Hi. Im sorry you are having trouble with your lock. Try setting your code above the middle or bellow the middle line. You could have accidentally set it that way. Or double check your personal code once again, you maybe off by one number. Please let me know.
@johnhoffman35989 ай бұрын
@@YARDLOCK_ Thank you for responding for some reason the first number was one number off what I set it at. I got it open.
@YARDLOCK_9 ай бұрын
@@johnhoffman3598 Good to know. Please let us know if you need any more assistance.
@chain-wallet10 ай бұрын
oof. mine needed to be backwards from this, and the latch wasnt flush. and the cover immediately broke when i opened it, but yea i got it on lol.
@YARDLOCK_10 ай бұрын
Oh No ! Im realy sorry you had a misshap installing your new lock. Send me some pictures and I can send out a new cover for you. [email protected]
@bigred437910 ай бұрын
EXACTLY😂😂 Shoes and all!
@YARDLOCK_10 ай бұрын
And YARDLOCK's Gate Lock will save you all that hassel of going through your house to open the gate. Our Gate Lock is designed to give you 2 way access without having to look for a lost or broken key, or deal with rusted or frozen deadbolts. Getting in and out of your back yard has never been easier.
@jobiker200210 ай бұрын
Will install mine this weekend
@YARDLOCK_10 ай бұрын
Thank you, please post pictures if you like.
@KeshaLee11 ай бұрын
When I openy gate to enter the backyard, it swings toward me (out) not in like in the video. Can yardlock still be installed?
@YARDLOCK_11 ай бұрын
Hi and thank you for your purchase of one of YARDLOCK's products. Yes, the Gate Lock Can be used on outward opening gates. There is instuctions & videos on how to do that. You would mount the lock on the gate and the latch on the post. Easy as pie. Please let me know how you get along with it. Thanks.
@KeshaLee11 ай бұрын
@@YARDLOCK_ Ok, thanks I'll give it a try.
@ACTUALLY418 Жыл бұрын
Easy as pie! I followed the video exactly and changed my code.
@YARDLOCK_11 ай бұрын
Thank you for your comment. We at YARDLOCK enjoy hearing positive feedback from our valued customers. Enjoy many many years of use with your Gate Lock. Dont forget to spay some silocon lubrication on all the working parts at least twice a year.
@ACTUALLY41811 ай бұрын
@@YARDLOCK_ Thanks for the tip on the silicone. I did not know that I should do that.
@YARDLOCK_10 ай бұрын
@@ACTUALLY418 When you have finished your installation, please upload pix or videos to our instagram page, thanks
@Sarge92 Жыл бұрын
what stops me pushing a stick through the gap between gate and fence and pressing it against the latch claw so it lifts up the same way the gate lock bar presses against it when i close it?
@YARDLOCK_ Жыл бұрын
Hi and thankyou for your question. Our Gate Lock kits contains a a latch cover. This prevents anyone trying to tamper or rerach over the gate or inbetween the post and the gate. The latch is spring loaded and it would be difficult to try and stick a stick in there to try and open the latch. If you are successful and want to prove mw wrong. Send us a video of your success. The point of having a Gate Lock is to keep unwanted people wandering in your back yard. Espseciall if you have a pool or a hot tub. By Law, a working Gate Lock is required. If the avarage adult wants to get in someones back yard, im sure they will find a way. But Our Gate Lock prevents smaller children accedetaly drowning in someones pool, or hot tub. By the time someone is fiddeling around trying to break into your back yard, they will get fed up and move onto the next one. its not a fool proof lock and neither is a pad lock. If someone is determined, they can just jump the fence, with out trying to hurt themselves, If you have any more ideas or questions, dont hesitate to post them.
@Sarge92 Жыл бұрын
@@YARDLOCK_ i did notice the over reach protection and that is indeed a improvement what i meant is in typical operation the bar portion attatched to the door will press against the latch claw and the curved shape of the latch claws front will slide upwards to allow the bar to slide past before dropping over the top forming the locking mekanism would your average person not be able to simply take a stick and press against the latch claw like how the locking bar would when closing to raise the claw then a push to the door would allow the locking bar to slide out of the claw if that is indeed the case you could protect against it by making the shroud hinged such that it coveres the entire locking mekanism from poking at as for exiting youd just need to lift the shroud press the release catch as you usually would and exit i do see how this is a restriction method rather than a security measure to keep kids out of pools over keeping unwanted adults out
@YARDLOCK_ Жыл бұрын
@@Sarge92 The shroud is held on with 3 screws. It would be impossible to remove with out a screw driver or HAMMER ! We have done extensive testing on the lock, latch & shroud system and found it vertually impossible to tamper with.
@Da_Crow Жыл бұрын
best invention ever
@YARDLOCK_ Жыл бұрын
Thank you. I hope you have years of great security for your back yard.
@littlejk7913 Жыл бұрын
Where can I purchase this?
@YARDLOCK_ Жыл бұрын
Hi and thank you for interest in one of our Yardlock products. The Slider Lock is our latest addition to our product line. We are expecting inventory this July, 2023 After great success at the Las Vegas National Hardware show this year, we went right into production. Set up, retooling takes a bit of time, but will be seeing it roll out in July 2023. Please contact us here; [email protected] and we will contact you as soon as it arrives.
@johnfitzpatrick8531 Жыл бұрын
Ive completed every step and everything seems fine except when I try to scramble the numbers to lock the gate, the numbers dont move! Please help!
@YARDLOCK_ Жыл бұрын
Hi and thank you for purchasing one of our Yardlock products. One solution you could try is, Open the box and back off the 4 mounting crews. They could be distorting the box. They only need to be hard tight. Please let me know if this works out for you. Thanks.
@nickbarry659 Жыл бұрын
I'm having the same problem, I've loosened the mounting screws and the numbers still won't turn.
@YARDLOCK_ Жыл бұрын
Hi. Please make sure that the lever inside the box is in the original position and the rubber stopper is in place. Please let me know at my email; [email protected]
@freedomadvocate63822 жыл бұрын
Love it
@SacTu2 жыл бұрын
How come my lock it appears impossible to thread the wire through the second hole?
@YARDLOCK_2 жыл бұрын
Hello and thank you for purchasing Gate Lock. Sometimes the wire maybe frayed at the end, preventing it to go through the hole. Make sure the wire is not frayed and you can also take the second screw all the way out to help with the wire passing through the second hole.
@sanitary1032 жыл бұрын
Any reason why after setting my code, the dials locked up? After that, the box now does not close and the switch inside is stuck on the original position.
@YARDLOCK_2 жыл бұрын
Thank you for purchasing Gate Lock. There could be a few reasons why this is happening. Please post pics of the Gate Lock in the open position please.
@YARDLOCK_2 жыл бұрын
One possible reason could be that the code reset latch / slider, may not be seated properly. Run through the instructions on how to set your code one more time and see how it goes. Keep me up to date please.
@YARDLOCK_2 жыл бұрын
Another problem could be the cable bunches up when trying to close it. Please make sure the extra cable is sitting nice and neat.
@copyninja20042 жыл бұрын
I've had the same issue. Now after scrambling it locked while it's opened. Any way to reset without knowing what combination you used?
@sanitary1032 жыл бұрын
@@copyninja2004 I'm not 100% sure. see if they can send you a replacement and be sure to be very careful in the steps when reprogramming it. they have videos on KZfaq to show you exactly step by step so it doesn't happen again.
@dannyyorri23452 жыл бұрын
do you have the play music so annoying!!!!!!!!!!
@YARDLOCK_2 жыл бұрын
Thank you for your comment.
@bigred437910 ай бұрын
Annoying that you don’t know how to turn the volume all the way off.
@scottmcclements75663 жыл бұрын
I'll make sure I leave the holes and rust stains from the previous lock half exposed just like this. Saves time.
@YARDLOCK_2 жыл бұрын
Thanks you for your comment.
@drewmustang61383 жыл бұрын
ANY OLD WOMEN COULD KICK THAT JUNK IN ! USE A DAMN WEATHER DEADBOLT KEY LOCK..
@miakrauss5553 жыл бұрын
My gate swings out....does that mean the lock will be on the actual gate door?
@YARDLOCK_3 жыл бұрын
Hi and thanks for your question. Yes, the actual lock will have to be installed on the swinging gate. Alternatively, you can reverse the hinges on your gate to have it it swing in and install the lock on the post.
@miakrauss5553 жыл бұрын
@@YARDLOCK_ tnx...I did have to install it on the gate. This is the 2nd Yardlock I have purchased...it is an awesome lock....perfect for my needs.
@Paggy66684 жыл бұрын
What happened to the spring that i've seen on older videos? Did it get redesigned and removed?
@YARDLOCK_4 жыл бұрын
hello Dean, and thank you for purchasing one of our YARDLOCK products. we have recently upgraded our spring latch. This way the spring that was seen in the video is no longer needed. if you look closely at the latch you will notice that it is spring loaded. I hope this answers your question. If you have anymore questions please free feel to post them.
@ryanr62404 жыл бұрын
Does it work with both inswinging and outswinging gates?
@YARDLOCK_4 жыл бұрын
Hi. The Gate Lock can be used on both in swinging and out swinging gates. Please read the included installation instructions for either application.
@briant54110 күн бұрын
@@YARDLOCK_do you have an installation video for an outswinging gate?
@YARDLOCK_10 күн бұрын
@@briant541 Hi. Im sorry , but we do not have a installation video on out swinging gates. There are full instructions in the package. Also check out this TikTok video; instagram.com/reel/CvgE8UNMph0/?igsh=MzRlODBiNWFlZA==
@MatthewCarroll2124 жыл бұрын
Am I able to keep it unlocked so guests do not have to use the code?
@YARDLOCK_4 жыл бұрын
Hello Mathew. Thank you for purchasing one of our YARDLOCK products. The Gate Lock can be left unlocked for your guests to have access to your back yard. Just enter your personal code, close the box and the slider cover and it will stay unlocked until you scramble the code again. You can also leve the box open, so the gate will open and close freely. Please remember to close the box, scramble the dials after your guests have left.
@MatthewCarroll2124 жыл бұрын
Will this work on a vinyl fence gate?
@YARDLOCK_4 жыл бұрын
Hi and thank you for purchasing one of our YARDLOCK products. The Gate Lock can be installed on a vinyl gate and post. Take extra care when installing the screws as the vinyl is thinner and the screws have less to grab onto then wood.
@YARDLOCK_4 жыл бұрын
Thank you for your question. Yes. So long as one of the panels can be fixed in a locked position. Please post a picture when you have it installed.
@manstersr4 жыл бұрын
I assume it can be mounted on a two panel gate where they open out just like a single panel gate that opens out?
@YARDLOCK_3 жыл бұрын
Hi. Sorry for the delay in replying. Yes, as long as one of the two panel gates is in a secured position the gate lock can be mounted to either one.