Wasup man I got a 125 rfz starts up good rides good but once it’s fully warmed up after riding it around for 30 min or so it’s starts to smoke from exhaust and I’ve noticed that there’s a air hissing sound coming from the hose that connects to the air box and crank case any idea on what that might be about
@WaldensWorldКүн бұрын
Time to rebuild top end your rings are shot you got blow by into the crank case ! You need new piston n rings for sure
@isrealperez90693 күн бұрын
I guess your problem was you had to kill switch on all this time
@WaldensWorldКүн бұрын
You guess wrong !
@isrealperez9069Күн бұрын
@@WaldensWorld My only problem was when I start up my scooter it kicks in and then it dies I thought it was this thing called a peacock unfortunately it wasn't I don't know else could be wrong with it last year it worked pretty good but I had the I had on something too high I don't know if the Rev needs to be high or low cuz I accidentally rejusted I just ordered some new spark plugs because I don't know any local place where I live in Connecticut I just wish to get this thing out of the garage and ride around in it
@johngibson14915 күн бұрын
Brother you know what to do as far as wrenches.and you can make money. But if you want some advice don't l😂 comments bring you down cause I know you got this bud❤❤
@WaldensWorld4 күн бұрын
Thanks man have a great day !
@johngibson14915 күн бұрын
Sorry your having such a stressful time. I've been there. You have a long gy6 so you did right by bottoming the exhaust and all studs but you seen you couldn't get the head on cause the studs were hitting. And I hope you set adjust the valves at exhaust and tdc.Its aggravation in a gy6. 👍👍
@vnonkwinn623310 күн бұрын
He's going thru too much unnecessary shit
@WaldensWorld10 күн бұрын
Well if you just out of gas yes but it depends on your problem, just because it don’t pertain to your specific issue don’t mean it’s not valid to another person thanks for watching
@joshuacarlile920714 күн бұрын
Like so many others in here this video saved me much time and frustration. Thank you very much good sir. God bless
@WaldensWorld14 күн бұрын
Very welcome! Glad to help we all can in small ways !
@capthwdy0815 күн бұрын
I Know it's been a while but do you recall were a u shape space went on the transmission? and what did you use to align the clutch plate with?
@WaldensWorld14 күн бұрын
I sure don’t I’m sorry ! That thing been sold couple times lol I had new owner send me message saying it ran great but there to slow for my liking n the shocks are horrible bout all I remember
@fiske7418 күн бұрын
Gonna give it a try got a used one I’m replacing parts on and this could maybe fix this one issue I have too Thanks
@VisitorE.T.21 күн бұрын
What was the problem ?
@rk-ec7kx22 күн бұрын
A cool little ride
@WaldensWorld21 күн бұрын
Thanks it’s gonna be at the lake for my buddy’s kids to mob around on ! He supposedly gonna do it up with speakers n back seat etc
@user-xz9bm6pu6k27 күн бұрын
Please I have problem with my motor bike. The problem is when you start and the engine starts working, and hold the chroch handle, then press down the jear to first jear then the engine goes off, onless I put its to natural before its will start again. Hyosung gt250r and taking in too much fuel
@WaldensWorld27 күн бұрын
Clutch may be sticking or clutch cable needs to be tightened!
@CroEk91329 күн бұрын
What size piston I usually see 52mm then 54mm which one should I get I don’t got a tool to measure I might just get the 54mm
@WaldensWorld29 күн бұрын
Mic the cylinder if it has a longer stroke it can have a smaller piston n still be same size cc
@xgenseanАй бұрын
I about died from the description.
@xgenseanАй бұрын
Yuck.
@nicloewenhagen5557Ай бұрын
How are you torquing the cylinder bolts? I can't fit anything in there to get it torqued
@WaldensWorldКүн бұрын
Yes I cheated goodn plenty torque specs felt like 26psi lol
@BinkkDoesStuffАй бұрын
Any more videos on this cx50 brother? I got an old cobra from a neighbor who literally had it sitting outside for trash pick up. Im down to the block (had to clean a ton of old dort/mud off case before wanting to open) ... Currently the kick starter is tight/slips so im curious where to start or how the engineering on these are like
@WaldensWorldАй бұрын
In the cover there is a gear that kicks out has a guide wire on it I’d check that first n if the clutch isn’t seated the clutch nut / starter nut will be to far out n bind causing it to stick to the gear on the case if that makes sense ?
@mannytorres3692Ай бұрын
For all of you watching this video you use the guy said don’t go to the customer. We fix it in a minute. Let’s wait 4 days damn tell you so we can charge more money,💰 so now you know the trick of the mechanics ! Mechanics are liers 🤥🤥🤥🤥🤥🤥🤥🤥💩💩💩💩💩😩😩😩😩😩😩🤡🤡🤡🤡🤡🤡🔥🔥🔥🔥🗑️🗑️🗑️🗑️🗑️
@WaldensWorld27 күн бұрын
I’m no liar !
@Ted3422Ай бұрын
Faulty decompression valve. Makes it almost impossible to rotate the engine.
@WaldensWorldАй бұрын
Yes sir no argument there lol I think it went out again just had my truck over my buddy shop he said he think new one is now bad ! Back to trying to pull start it n e start ! Those parts are not made the greatest seems !
@koraykumru1295Ай бұрын
I'm going to try this out tomorrow.
@AndyWilliams-pw9gtАй бұрын
What carburetor did you use?
@WaldensWorld15 сағат бұрын
Not sure it was probably off eBay
@johndove5902Ай бұрын
worst thing a manufacturer can do is put all that electronic stuff on a riding mower.Good lord.
@nassirbadrudin9741Ай бұрын
How did you actually take the triple off? The lip you mention seems to be preventing it being tapped off. I watched your other videos but other than a “math” comment there was no actual advice. Do you have to remove the broken off safety screws? I’m sure I’m not the only one looking for this missing piece of recording. Thanks
@WaldensWorldАй бұрын
Pull fork legs down out of the triple tree !
@nassirbadrudin9741Ай бұрын
How does the triple actually come off? Tried tapping it off but there seems to be a ridge underneath stopping it. Watched your other videos but didn’t catch that. Thanks
@MickeyOutlawАй бұрын
What do you do to fix it
@RpglodedАй бұрын
Is it js me but I was a kinder at the time and orr don’t look anything like that unless that’s a different orr
@WaldensWorldАй бұрын
In ft smith Arkansas?
@ChrisMichalski-hi7djАй бұрын
Cool video very educational I have the same exact bike red not many stickers same axle set up mine has bronze color shocks w/ wide 12" street tires. Im located in south Nj if interested
@jamesmontalvo7606Ай бұрын
Just got my 2012 buddy running after messing around with everything fuel wise. The problem ended up being the float inside the carburetor. Was not adjusted properly. It was closing the fuel line before there was enough fuel in the bowl. Had to adjust twice. Hope this helps someone
@WaldensWorld15 сағат бұрын
Thanks for the information it will definitely help someone! Good catch also
@iseeugamers36202 ай бұрын
Am a little confused with the gt125r egr configuration if u could help me with this 3:50
@carlpeterson79472 ай бұрын
Short and to the point. Thank you very much!
@niklas65742 ай бұрын
where is part 2
@johnbart84542 ай бұрын
Curious is there a key on the shaft on that ?? & Is it easier to take off the deck to change that ? Thanks !
@WaldensWorld2 ай бұрын
Has splines n no just clean shaft so yolk will move up the shaft to clear output shaft !
@johnbart84542 ай бұрын
Ok awesome thanks for speedy reply back !
@TalariaMonster4132 ай бұрын
I know this is really old video but i picked up same brand and need parts for it, just need to ask you some questions id possible
@georgewhite47352 ай бұрын
no one ever shows the difficulty to remove the front bolt!
@WaldensWorld2 ай бұрын
I need to put a clutch in it now ! N redo front forks n seats !
@SSgtJohnT2 ай бұрын
Dude!! Thanks so much!
@nyletaylor22732 ай бұрын
this is a sale lead generator. It does nothing to give you an estimate - the only thing you will get is a sales call.
@Dj1Lawre2 ай бұрын
Thanks for the video but video audio is back very bad and disturbing
@CraigBierer2 ай бұрын
Thank you, definitely a big help
@murrayminimotors16742 ай бұрын
✔️ me out Murray mini motors on ▶️
@murrayminimotors16742 ай бұрын
Sweeeet video thanks
@jakehurstnew6772 ай бұрын
So what do i actually need to do to fix it?
@WaldensWorld2 ай бұрын
If it’s vent you need new gas cap ! If it has key make sure flap hinge in on top so if it rains it don’t go down key hole into tank n plug up vent !
@jakehurstnew6772 ай бұрын
Nice one
@tehnoelektronikloznica71192 ай бұрын
Glupost. Šta hoćeš da kažeš? Da se moped pokvario tako da su rolnice postale teže? Očigledno je da problem nije u rolnicama nego u kvačilu. Verovatno je pukla opruga kvačila a nju nisi ni pogledao.
@WaldensWorldАй бұрын
Not sure what your trying to say but I’m just modifying the roller to have more torque there is nothing wrong with the scooter! This is a free way to do it ! You can buy lighter rollers and have 6 to achieve same results you can buy stiffer clutches springs to take off at higher rpm to also help with torque! Thanks for watching! This is just a free way to do it
@juny28162 ай бұрын
useless video
@glennjohnso3102 ай бұрын
This is why I live on 180 acres of land where nobody can see my house.
@WaldensWorldАй бұрын
Well don’t invite Gary n his old lady over lol nice plot of land it got natural spring on it ? That’s my goal property
@user-dm8gr9oj3v2 ай бұрын
I just got my brand new moped 100 cc magnum and it keeps stalling and sometimes if I turn to right it goes on what’s going on I spent 2 grand on this!
@WaldensWorld2 ай бұрын
It you turn to right ? The engine revs up ? Check the throttle cable maybe bound up by the handle bars ? It has a throttle adjustment screw on carb under seat does yours have a cover to get to carb ? Put it on the stand with back wheel in the air and adjust it up til it engages then back down to a nice rpm
@konamies692 ай бұрын
what gram rollers did u use when u changed the variator?
@WaldensWorld2 ай бұрын
I got no idea honestly sorry
@ttowndex2 ай бұрын
What did you use to clean the gears on the engine side?
@WaldensWorld2 ай бұрын
Carb cleaner
@WaldensWorld2 ай бұрын
I’ve got one right now I have to pull motor to replace the shaft the splines are wore out to bad
@AH-wk1id2 ай бұрын
Would you buy one for 9300$ with 1600 hours? I’m thinking about getting one used
@WaldensWorld2 ай бұрын
First I’d make sure hour meter worked these didn’t and never got serviced! I’d buy one for couple thousand but not $9300 it have to be in good shape ! What’s that vs new with warranty?