Cant find the link to the part brother

I turn on my DRL on a ram 2018 lonestar silver edition. They are working 100%. I used my turn signals lights for this. Only problem is that the option to turn them on and off doesn't appear on my radio unit under settings. I turned on CustSetMenu 1 daytime running lights CSM> yes. But the setting doesn't show up under the lights menu. Any ideas why this is? Is this setting not compatible with this truck year. I've seen other ram trucks have this option.

can i pass emissions?

Hmm my settings won't stay, odd. I tried turn signal lights and reverse lights and it says it's changed but it still showing on the dash.

I was playing around with the milage for fun . I put 24500 miles and 14900 popped up. Now I can't get it to go back to the 29300 it had. Going to be embarrassing if I have to take it to the dealer

Fixed my problem and the shake test proved correct! Thank you!

What are you using

To my fellow Canadians out there. If you have one set in KM and not miles just keep in mind that whatever number you input will be converted from miles to KM so if you’re looking for 150,000km you need to input 93,205

Thank you good human being. You saved me lots of trouble and money.

Looks sweet. But that glue removal though…..

It works, had to change a sensor , and light of engine seems to need reset, and used this le tech, moved the negative Cable

I think mine is the exhaust leak. I see yours continues to tick. Mine when it's cold will tick for about 30 seconds and go away.

I have purchased two of these and they were rattling brand new out of the box. installed one anyway and my gas cap error was gone, but just for a short while and the error message is now back. I wished this would have worked.

'Like' earned

What radio is that???

whats the difference in obdlink lx and mx? will obdlink lx work on 2024 ram 1500 trucks?

Thank you

Will this work on 2021 5.7 longhorn?

That will not help the emission pass.. it only reset the light.. smh

Then why does a new one rattle.

What headlight assemblies are those? And do you like them?

After removing the bolts and clip, push the light out from the back through the hole.

When you’re running 97 or high octane in a truck you definitely have money to burn lol

This was the quickest fix I’ve done on my truck. This video was great straight to the point and showed visuals!

So did you have to pull back the top radiator cover from each side? I’m new to owning a 4th gen Ram Diesel. ✌🏽

Thanks for sharing this with us, I’ll get busy getting new led headlight bulbs on my ram… again thank you 🙏🏽

All I did was open up the dust cover under the fender and twist the bulb out put a new one in and reinstall back in the hole with a twist and snapped the dust cover back on my 2010 Ram 1500 . This was for my front signal bulb .

The tailgate emblem does have 3 pegs as well as double sided tape

I have a 2013 ram 1500 how do I know which powernet to connect to because there's 3 options

why dont anyone tell us you need a credit card to buy alfa OBDlink ?

why dont anyone tell us you need a credit card to buy alfa OBDlink ?

What year is your truck? I’m thinking about getting one and this will be the first thing I do thanks, Charles

anybody watching this video needs to do more research

I changed that & the purge and it still on & the cap keep coming loose

No year

man i got a 07 ram 1500 with the 5.7 im saving up for a supercharger it should be plug and play hopefully, but i would also like to get a tuner and give myself a tune but honestly i dont know shit i’ve never owned a ram

What a fool you are. That is not how to reset engine codes, but also this does not work on all codes

How is this a review? Lame

Miss your vids, hope you come back soon

Use a small amount of Never-Seize for the door squeak. It will not wash away or break down like grease. Only had to do it once and now door does not squeak anymore.

Thanks for the tips, my 2012 has a slider unlock behind the assembly, access thru the door in the wheel well. I also loosened up the 3 fender screws to get my hand behind the light assembly and pull it loose easier. Strangely enough, my lights just have a short somewhere, i tried to unplug the main connection but it would not come out easily but that seemed to be enough to get my lights to come back on!

You said remove negative side, but you removed positive ?

This saved me so much time

Hey bubba. Can you use OBD isolate brake signal / blinker signal? I managed a truck up fitter and have a 23 3500 ram in here. The flat bed we put on it only has one brake/signal light and we want to tell the computer to isolate either wire to do both jobs. Is that possible?

You said to discount the negative side but you disconnect the positive side?

Good Video! How did it hold up over time?

I have a 2012 RAM 1500 ST and i don't have the the CBC Features and was wondering is there still a way to enable LEDs with AlfaOBD for it. I tried the R/T LED option and it doesn't work, was looking for some help with it please and thank you.

My gas cap light is back on after changing that part and purge valve. Not sure what to do now

Hey Big Daddy's House, good video. What radio upgrade do you have? Thanks

Soooo after applying this feature, I need to run proxi?