thanks again; I compared the one you used to the one I previously installed that didn't work and yours has different bulb design so i'm ordering it and trying again. the one i previously used prevented the titan oem seal from making contact and actually made the leak worse so i'm excited to try this one. The other thing i've considered is the possibility of replacing the bungee straps with something stronger that would pull the hatch down harder. THANKS!!!

Native now makes a scupper that fits under the hatch for this…check their site. Of course that’s usable only if you’re not using the Propel drive.

You should contact Native support and share that idea with them. Good Information.

The problem is that they using repro plastic in the good resin mix. In the mold process of the kayak . Resulting in this cracking do the impurity in the quality of the plastic Really sad to see this in such a comfortable kayak design. Thanks so much for your honest reviews and the time you spend doing content !! Keep it going Brother 🍀

Nice work, but you guys have to invest in a step bit. Game changer!

Awesome channel!!! Tons of ideas and tips!! Looking at buying a new (2022) 133x that has only been in water 1 time. What size inner tubes were you looking at for those trouble areas?

My only concern as you noted is trying to get that off if and when it eventually wears down is going to be really difficult.

Whats the top speed with your 45# thrust motor on the 133?

So I just got mine and set everything up, but apparently it is not firing. I also checked with the trigger and took of the safety and no fire. Any tips to help a brother out?

Thanks for sharing your day on the lake really nice video and done great bass catches! Yes sir I applaud you on making the right decision immediately to remove yourself from the water when first hearing the lightning! I can’t enjoy your videos if something serious would have happen to you guys! Tight lines take care and God bless.

Where u at this time?

Great video guys…question….my understanding is when running battery wire for extended distances you need to use 8-10 gauge wire. I realize that your distance is not that long but the YakPower wire seems to be under rated. Do you feel it is okay?

The installation is pretty clean. Has anyone installed them with the 1/2" hole opposite of how you did it? That would keep all that extra wire off the hatch lid?

So, instead of cutting the whole grip off, why not just cut off as much as needed to mount the loc and load? Sorry, I know it’s just a handle and I doubt a side would be used much but seemed a bit aggressive. One last thing, since you’re doing a lot of this stuff, I’d highly recommend a couple sizes of step bits. Nice job otherwise.

Maybe show the battery more next time?

How easy is this thing to paddle if you dont want to put a trolling motor on it?

Tree pounder

I just found your channel. That kayak looks great. I especially like that the surfaces are all mostly flat; that makes it much easier to mount accessories. Usually, most kayaks have several curves to deal with; that's always problematic. I may have missed it but how is the stability? Do you think the v-hull on this model is just as stable as a tri-hull design? Have you been in any rougher water... any two-foot waves with wind? I like the looks of this rig a lot. I've been looking for a few months and this one might be the one. Thank you for posting this. Subscribed.

I couldn’t wait for the berleypro as the sand in Florida was tearing up the bottom of my yak. So I ended up making my own out of kydex and glad I did because the berleypro doesn’t go back as far as I needed

Another good video guys. Question…do you have the link to the guard for the Titan X? If you go in Amazon, it lists the Titan 12 NOT the X. If you go on Burleys site, they list the X but the sku #’s are different than on Amazon. Want to make sure I get the correct one. BP410213 - Amazon Titan 12 BP410216 - Burley Titan 12.5 X

Thanks! The BP is going on mine.

Another good day out there! Good job! Thanks again for sharing your adventures!

A really nice day of fishing. You did a good job out there with some nice catches. Appreciate you sharing this!

thank you for the advice. i was recently looking at kayaks and found this video and your first. and i will say i wont be getting this kayak. having it crack like you said after two years of use is probably not a good thing

how do you change lighting on screen

Hola saludos! Mi nombre es Orlando por qué no lo vendieron o lo donaron a alguien que lo necesita o quiere tener uno medio tristeza por qué yo digo yo ahora mismo quiero uno por condición de mi hijo tengo mucho gasto y si tú lo vendes más barato yo a lo mejor lo pudiera comprar pero no sé el por qué del motivo de picarlo pero les deseo muchas bendiciones y muchos más suscriptores

Hey what size of cover did you end up getting for you titan 12.5? Thanks

is it possible to set the traditional + ClearVü screen to auto-start when turned on?

Great video! Thank you!

Great video guys!

I’m sold I’m off to bass pro shop I’m so serious ima get a kayak trailer and this is the one! I wanted a hobie but if I buy the 133x and upgrade it I will be under the price of the hobie I wanted

Glad to see your partner back on video.

Next MAKB East event is there. Hopefully it's on fire. Place is loaded with giant smallmouth and largemouth. Good stuff, dude!

Have you tried to put a Kayak Kushion on the Tiatan X if so how did you secure it. The seat material is solid don’t want to cut it.

Nice, where can I launch the canoe..

What if I have a PA12. No track? Trying to mount it in the very back but there’s no spot to mount to.

Heck of a day for fishing! Beautiful Gin clear water too! My favorite!

Hey guys. I know a few of you have commented about our camera microphone while in high winds. We are currently working on a solution for that. In the meantime we appreciate your patience and thanks for watching!

Wind sock for the 📷 . But great video

I've not loaded mine yet, and i have a 10.5 so it will be a little different as i'll have to come up steeper.... my concern was with hitting the transducer and protecting the rudder. I was wondering if turning the rudder to it's maximum ability would help get it out of the way so you could bring it up at a steeper angle to clear the transducer. Is that something you tried and ruled out for some reason? I've learned a ton watching your videos... thanks so much for posting.

This is a great review, thank you!

Promise guys last question , just a little nervous with install . I got the plug you recommend . Doesn't have a positive or negative symbol, just numbers, is #1 the positive side ? Appreciate the help.

There is a huge demand for pickup trucks with longer beds, 7’ and 8’. Not only for kayaks and small fishing platforms, but look at all the construction contractors that also want them. Pretty sad that nobody is making them.

Some really good information! Thank you!

Price for that unit

Good stuff as always! Gettin on those fish! Thanks guys!