First fill disassembly video I found as most videos were basic field strip. Only suggestion I have is maybe having another camera for close ups, or bring the smaller assembly parts closer to the camera. Good video. Thanks
@danielmambrini2063 күн бұрын
Hello, my name is Daniel from Argentina, I thought your tutorials were excellent, I have a Winchester 1400 and a part broke, I would like to know if you can help me get that replacement part or where to ask, I don't have the breakdown of the weapon. I would need your help. thank you so much 1:34
@migo66638 күн бұрын
Very interesting. I write some action story and the LWS 380 take place in. Did you think that this little thing is buyable in Europe ?
@UndertheGun8 күн бұрын
I dont know
@MidNightsHunter9 күн бұрын
Thanks!
@moriel907513 күн бұрын
Thank you, one of the best videos! next you could use 1080p camera and a better lighting
@grahamlewis620413 күн бұрын
Good video but the vulgar language, please
@BBKlima16 күн бұрын
Thanks, I always forget that you have to pull the bolt back a bit to get the take down bolt to go in!
@lcfodat132116 күн бұрын
can I put a heat shield on a Remington 1100 semi-auto?
@UndertheGun16 күн бұрын
Sure
@lcfodat132115 күн бұрын
@@UndertheGun ...not to beat a dead horse , thanx for your response , so it will fit snug against the receiver and won't inhibit the fore grip ?
@UndertheGun15 күн бұрын
@@lcfodat1321 possibly, I have never done it
@frankfranklin336517 күн бұрын
I have the same one, it randomly just stopped working. When I pull the trigger I get a slight click but the hammer seems to not be dropping. I just have no idea what could be wrong, I’ve taken the entire back part of the gun apart and there seems to be no issues there. Best I can figure is maybe something is magically stopping the hammer from falling? Or the trigger is broken somehow? But there seems to be no evidence of anything actually being broken so I’m at a loss.
@ralphgreenjr.246620 күн бұрын
Can you believe that someone thought all of this up, some machinist made the parts, and someone figured out how to assemble it! That was before CNC machinery, cad, and investment casting. Point is; appreciate your model 36.
@UndertheGun20 күн бұрын
Thanks
@BubimedesOfficial21 күн бұрын
I have a 1929 16 Gauge A5, and most of the lock screw heads are stripped; so unfortunately, I'll have to tap and die them to get them out. Thankfully, I can get a whole set of lock screws for $25 online. Aside from that (and black gunk and junk ALL OVER the internals), take down and cleaning has been a pinch. So thanks for your in depth instruction, it really helped!
@UndertheGun21 күн бұрын
Dont have to tap. Drill a small hole in the center, then hammer in a small torx bit. use that to remove them. I would not do that with a hand drill
@greenharvestproductions674323 күн бұрын
I'm glad to be on the channel. Glad I found your information and your nice videos on how to disassemble the weapons, especially the gp100. Do you have disassemble on the Taurus 605 and Smith& Wesson model 629 thank you very much. Love your channel. Love the incredible information on how to take these babies apart. Yours truly, gunny SGT Velez USMC
@UndertheGun23 күн бұрын
Semper Fi Gunny, I did 8 years in the Corps. I have a smith and wesson revolver dis and ass video, they are almost all the same prosses model to model.
@greenharvestproductions674324 күн бұрын
Thank you for the info on the GP 100
@UndertheGun24 күн бұрын
You are welcome
@HeyNorm27 күн бұрын
Thank you very, very, very much sir for sharing your science ! I could not have re assembled my gun without your help. Very helpful !
@UndertheGun26 күн бұрын
You are welcome
@brianquinn699729 күн бұрын
I received this gun 22 years ago after my father died. It was constantly jamming as it had never been cleaned since he'd bought it despite thousands of rounds, possibly tens of thousands going through it. I can't fire it more than 2x without it jamming, so this is exactly the walkthrough I needed. Thanks for sharing your knowledge!!!!
@emiliodiaz3827Ай бұрын
Hi i need help for resambly My sub 2000 who i can a send You a mesage?
@davejohnson7720Ай бұрын
"The Widow Maker"
@lambman1999Ай бұрын
Safety wasn’t bad at all if you had a vice… no vice - I would’ve rage quit 😅😂
@jeffreyjohnson943Ай бұрын
The guy need to not wear black gloves on black items. Also need to not have the trigger so far away when going back together. It was not helpful.
@marcelogauna3983Ай бұрын
Do they still sell parts for this? I thought they were discontinued. My receiver is sticking 😡
@UndertheGunАй бұрын
NO!
@terrystroble8657Ай бұрын
Thanks!
@stevedec1111Ай бұрын
So my carrier dog broke shooting turkey loads...ordered parts, was wondering how to you replace carrier dog rivet, I drilled old one out.
@UndertheGunАй бұрын
Buy a new rivet
@nyfraudАй бұрын
How I fix trigger didn’t reset
@deannichols69922 ай бұрын
I have a P97DC and I couldn’t find a video for that gun but it happens that a P97 is a copy of the P95 but in 45 not 9mm thanks for the information now I know what to do if I ever have problems with it
@dalejohns27582 ай бұрын
Why you keep calling it Aufomatic? It's Semiauto.
@UndertheGun2 ай бұрын
Because when this and other guns like pistols were first on the market, they did not have to be manually operated. Hence automatic, or auto loading. these terms are interchangeable in this industry.
@dalejohns27582 ай бұрын
@@UndertheGun nope
@sammyprestwood31822 ай бұрын
If you can't handle the gun without gloves or you're not going to shoot it. What cat is it?
@UndertheGun2 ай бұрын
The fuck are you on about.
@CodyEwald-oh3nk2 ай бұрын
I had a smaller spring with a yellow cap fall out from behind the trigger assembly. Any ideas how to get that sucker back in?
@UndertheGun2 ай бұрын
I'd have to have it my hands to know what your talking about.
@Zona-dw9rp2 ай бұрын
Well done. Thank you.
@jasonkome97342 ай бұрын
Yo i can't see damnit
@guestuser14792 ай бұрын
ok ive disassembled it i need help putting it back together
@UndertheGun2 ай бұрын
There is a reassembly video
@Mason-pu9lo2 ай бұрын
how do you take out the extractor
@UndertheGun2 ай бұрын
Its pinned, you have to drive it out from the bottom.
@rk22cc2 ай бұрын
Yes, always replace the buffer and return spring
@rk22cc2 ай бұрын
Replace the bolt buffer, it goes bad fast
@Georges58532 ай бұрын
your an uncouth foul mouthed hoopie
@cryptoloverscryptoaddicts14832 ай бұрын
mine will not even load the bullets or go click when i pull the trigger never used it just wont rack bullets the bolt is just stuck in the pull back position. no safety buttone either installed tek 9 luger mod k 6-9 interdynamic model.. any sugestions..
@UndertheGun2 ай бұрын
What is the serial number?
@williammesar78982 ай бұрын
Please do another video of taking a partner trigger guard trigger assembly and the bolt assembly.
@UndertheGun2 ай бұрын
If you are referring to the H&R Pardner, it is almost identical to the Remington 870.
@williammesar78982 ай бұрын
Well that's great but if you still really nice to be absolutely sure it's the exact one.
@UndertheGun2 ай бұрын
@@williammesar7898 I dont see many of those, but I will try to make a video if one comes through.
@cplhardcorps81562 ай бұрын
Outstanding video. Thank you! Pleasure to see a professional at work. If you're not a professional, you could be. Well done.
@holmski3 ай бұрын
Your tip about the piece on the trigger group that needs to be pushed out of the way saved my bacon. Thanks!
@jandjcharters3 ай бұрын
Loved the cometary and video. Learned a lot from your video. I Finally found one for myself but the trigger pull is ridiculously hard. Like 7pound or more. How difficult is it to get the trigger pull below 3 pounds. Or is it possible?
@blakelunsford3 ай бұрын
Nothing like a good video to learn valuable information.
@paullevins54483 ай бұрын
I have one of these in 12 gauge 2 3/4" Belgian made. far too complicated to take the receiver apart. They don't make em that way anymore.
@jimmy20603 ай бұрын
cussing was not what I wanted my kids to hear, sorry
@user-mv7ll8pq7b3 ай бұрын
Thank you sir for taking the time , I had to watch the video twice, but I was able to take it apart and put it back together and I didn’t end up with extra part like I always do 😂
@jimfields43933 ай бұрын
Can you just explain the reassembly and tips and tricks to doing so. Nobody cares how you treat your customers and what you charge.
@UndertheGun3 ай бұрын
you act like I owe you something.
@mikenuzzi19253 ай бұрын
Get yourself a gun mat.
@DarthSautiorn3 ай бұрын
Thank you for making this video. I just bought my GP100 last night. Haven’t fired it yet. I do see the gap between the trigger guard and the frame, very noticeable. Should I take it back and ask for help to get it more snug? Maybe the inside wasn’t cleaned out and erroneous manufacturing metal pieces keeping it from closing the gap? Thank you
@number1yota3 ай бұрын
I know this is an old video, But I picked up a SUB 2000 Gen 2 .40 on sale online, and didn't realize they did a "Multi-Mag" version. The multi mag takes (with the correct mag release) like 25 different hand gun mags, except Glock. I wanted this to go with the surplus of G22 mags I had from my duty gun. Long story short, you can "currently as of 02-26-2024" order the glock grip and mag release and swap everything over. Kel-Tec wanted me to ship it to them, buy the parts, pay labor cost, and pay to ship it back, and they were going to keep my multi mag parts set up for the M&P w/ 1 M&P mag. I was like naw send me the parts I'll figure it out. Your video was get for that. Thank You.
@UndertheGun3 ай бұрын
Glad to help
@andygold3 ай бұрын
Good video, but does anybody know of a link to a video that shows all the spots that need to be lubricated? And whether you're using oil or grease in those spots?
@UndertheGun3 ай бұрын
Pick on or the other, I only use grease on shotgun choke tube. Any place you see the parts moving against each other
@TexMexTactical3 ай бұрын
I freaking love that you use that tool as a pointer to what part you are talking about