KZfaq were you can’t show the 2 amendment but can show gays touching Each other and not be age restricted
@quan39217 күн бұрын
I love your AE videos
@MrDucatiti24 күн бұрын
Hello. New to your channel and been watching a lot of content. I just saw the Losi truggy RTR on sale as we speak.. Sorry noob question but do I need a SAE tool set for the new Losi's or they changed to Metric? Any recommendations? I just finished building my RC8B4.1 nitro :)
@MrDucatitiАй бұрын
New subscriber here mainly due to RC content. Based on the target, looks like you are flinching?
@sdyksterhouseАй бұрын
Would this fit 1/8 scale buggy
@OrcaBoat32 ай бұрын
I ordered this kit. However, I want to use the OS T1204 engine instead of the Kyosho .15 engine. Do you think this will be OK? Will it fit in the kit? I think I will need a different exhaust header. Also, I will need to use a starter box and am wondering if this chassis is compatible with a starter box.
@BloodyMeridianM82 ай бұрын
I just ordered this for my 17, do they work well or cause any malfunctions? Being lighter? Thanks
@Hungrybird4742 ай бұрын
Good job . I m not sure what to use 100,000 silicone or red and tacky . I ll bet it hardly matters . I seen the new ones are sealed or we can buy sealed
@ChristMaxxers3 ай бұрын
are they good
@philninety72304 ай бұрын
Very good tutorial, thanks!
@weekendrc3 ай бұрын
Glad you enjoyed it!
@toyota2189214 ай бұрын
Hi could you tell me how you supported the battery in place .cheers 🏴
@Mrbinh-mn4hd4 ай бұрын
Thanks you
@weekendrc3 ай бұрын
Thank you too!
@Trekceffej4 ай бұрын
I’m tryna get my hands on one of these
@weekendrc4 ай бұрын
backorder everywhere
@alessandropavolucci87204 ай бұрын
Ciao volevo sapere che grasso hai usato
@weekendrc3 ай бұрын
thanks!
@h3li0644 ай бұрын
Can you use any lipo batteries for the starter box?
@weekendrc4 ай бұрын
yes preferably a 4s for more power
@Sam-nz2zs4 ай бұрын
Is it fine to use stock spur gear as it’s plastic?
@weekendrc4 ай бұрын
it's fine but with upgraded it probably won't last
@Sam-nz2zs4 ай бұрын
@@weekendrc with upgrade steel it won’t last?
@ChrissColeman835 ай бұрын
Super 👍
@weekendrc4 ай бұрын
Thank you 👍
@joshuahernandez68715 ай бұрын
what type of back plate is that I've been looking for a blue one like that but cant find the model for it.
@weekendrc4 ай бұрын
strike industries
@norcal2A5 ай бұрын
Has anyone ever pulled the carb and put the engine in an oven at 250?
@weekendrc5 ай бұрын
I’m sure you can do that to get the engine to temp the heat gun is to expand the metal and prevent ware and tare on the internals of the engine
@weekendrc5 ай бұрын
What rc are you running??
@norcal2A5 ай бұрын
@@weekendrc Kyosho inferno, just messing around.
@eduardomalcom22286 ай бұрын
Hello Mr. weekend, in the rear shock tower, you comment that they must be screwed in the middle hole, I think they originally come in the bottom one... Why the change?? Thanks
@eduardomalcom22286 ай бұрын
Another question, do you have any video of the silicone change of the shock absorbers?
@weekendrc3 ай бұрын
im not sure if I made a video on that. I can make one when I have time, you men in the diff gears ?
@oojimmyflip6 ай бұрын
Im glad you are showing others how to do the break in process properly, Ive been critisized for not doing one tank on the bench and then running the car on the ground at quarter throttle for the second tank and then half throttle for the third tank then 3/4 throttle for the fourth and then up to full throttle for the 5th. I learnt how to break in Glow engines with OS aircraft engines and back in the day you started them on a bench mount with a small propellor so as to not load the engine up while running them in, expensive engine or not it deserves to be broken in slowley if you want it to last and I believe that loading it up to soon will shorten the life of the engine.
@weekendrc3 ай бұрын
thank you I appreciate it
@CarlosDelaoGunEngraver6 ай бұрын
does the engine need to be running rich during the break-in?
@weekendrc6 ай бұрын
A brand new engine most of the times come lean, I would richen it a quarter turn until there’s a nice rich sound
@diegoerni50276 ай бұрын
Perfect film
@weekendrc3 ай бұрын
thank you
@michaelmontgomery63886 ай бұрын
Why don't you talk?
@weekendrc3 ай бұрын
to much work talking editing the video
@narongrachmareongsit19787 ай бұрын
❤🎉😮ไฟไฟไฟแอดพ์
@weekendrc3 ай бұрын
👍🏼
@TruckingWithSteffon7 ай бұрын
Why not pinch the fuel line plugging the exhaust floods the engine.
@weekendrc3 ай бұрын
that works too
@Sam-nz2zs8 ай бұрын
Is this on 2s or 3s??
@weekendrc8 ай бұрын
It can run on 2 or 3s it need a wheelie bar tho, it would be nice to find one for this rc car
@Sam-nz2zs8 ай бұрын
@@weekendrc how fast you reckon for 3s?
@weekendrc8 ай бұрын
@@Sam-nz2zs not sure I haven’t recorded top speed on this yet
@Abszurdista-fatalista8 ай бұрын
Can you use a 4-pole motor with this esc plug and play?
@weekendrc8 ай бұрын
No you have to solder on the connectors to the esc that your motor uses
@Abszurdista-fatalista8 ай бұрын
@@weekendrc Okay, but if the motor already has the right 4 mm connectors?
@weekendrc8 ай бұрын
@@Abszurdista-fatalista you’ll need to solder the 4mm female connector to the esc so you can plug in your motor because the esc just comes with wires
@Abszurdista-fatalista8 ай бұрын
@@weekendrc Okay, thank you.
@UrbanLegendRC8 ай бұрын
Nice 👍🏾
@weekendrc3 ай бұрын
👍🏼
@eduardomalcom22288 ай бұрын
Hello, you recommend applying blue glue. in all screws that go to metal ?
@weekendrc8 ай бұрын
Yes definitely on metal to metal
@narongrachmareongsit19788 ай бұрын
❤🎉😮😊ไฟไฟแดอ์
@jrossnjax79 ай бұрын
Looks good. What grip tape is that? Seems like great option for gen 3. Does it stick well? I've used skateboard tape and it didn't last due to kydex hoster wear.
@weekendrc9 ай бұрын
From www.handleitgrips.com it stick well
@eduardomalcom22289 ай бұрын
The BEST tutorial in KZfaq, Tks
@weekendrc3 ай бұрын
thanks
@simonNFL10 ай бұрын
New diffs are only £9. Great video though
@weekendrc9 ай бұрын
My understanding with this rc is that if you add more grease to the diffs they will last a lot longer, they add little grease from factory
@ronin55010 ай бұрын
Did you change your battery pack to 7.4 volts??
@weekendrc10 ай бұрын
Yes
@ronin55010 ай бұрын
@@weekendrc so would you say then, that 6v servos aren't as good as 7v + powered? I guess I'm asking as i just got mine, 8ight, and I'm going to run till i break something lol. But i have a track here locally too, so it's on my mind about upgrades to race.
@weekendrc9 ай бұрын
@@ronin550 you would get the most out of the servo with 7v rather than 6v, but if 6v is all you need by all means its all about preference and what works for you and what your happy with at the end of the day
@ronin5509 ай бұрын
@@weekendrc one more for ya. So that ball on the throttle end just pops off to get to that screw head? Oh I see how you did it in part 1, as I was...
@eduardomalcom222810 ай бұрын
great ,Tks
@weekendrc3 ай бұрын
thanks
@eduardomalcom222810 ай бұрын
Great, super, Tks
@weekendrc3 ай бұрын
thanks
@eduardomalcom222810 ай бұрын
this is the best tutorial on KZfaq, congratulations and thank you., when assembling it is necessary to apply some of the screws some glue, that some screws come with glue. If so what glue do you suggest using ? TKS
@weekendrc10 ай бұрын
I’ll check out the glue I use and will let you know soon sir
@weekendrc9 ай бұрын
The glue I use is from hobbyTown.com it’s their IC-2000 it’s great because it holds strong and it’s rubbery when it dries up
@eduardomalcom22289 ай бұрын
@@weekendrc Thank you very much, could you suggest another, since in Amazon I can not find it, Thanks
@weekendrc9 ай бұрын
@@eduardomalcom2228 Bob Smith Industries BSI-118 IC-2000 Rubber Toughened CA Glue, 1 oz, Black a.co/d/huhywFW
@eduardomalcom22289 ай бұрын
@@weekendrc Super, THKS
@eduardomalcom222810 ай бұрын
hello, what kind of grease you use ? Tks.
@weekendrc10 ай бұрын
Lucas red n tacky grease is what I used
@blameusa708211 ай бұрын
lol not great for the environment are they lol
@weekendrc3 ай бұрын
yeah I agree but fun
@blameusa708211 ай бұрын
Running in is about heat cycles. not engine movement or anything else.
@blameusa708211 ай бұрын
reason i say is to reinforce the cooling down period between runs
@weekendrc3 ай бұрын
yes
@CoyoteDeadShot11 ай бұрын
What do you mean redo the end points? I just installed my savox servos while referencing your video and they kind of buzz just sitting there not doing anything. Kinda new to rc so don’t know if that’s normal or not
@weekendrc3 ай бұрын
Savoy servos are noisy but they shouldn't be buzzing end points is adjusting the servos turn radius so you have the right amount of steering if its buzzing its because you have to much and you need to set the endpoint so you won't have to much thats how you kill a servo, I believe I have a video on how to adjust the endpoints
@bradcameron171111 ай бұрын
impossile to tell what rms are doig coz music way to loud
@weekendrc3 ай бұрын
ill remember that for next video
@markgarcia855211 ай бұрын
To use a starter box what engine mounts do you use.
@weekendrc11 ай бұрын
I believe if I remember correctly the ones you need part # Tlr241017
@CoyoteDeadShot11 ай бұрын
@@weekendrcdo you know wheee to get them now? Everywhere I look it says discontinued and sold out??!
@user-xq1ms6of5t11 ай бұрын
Absolutely one the BEST break in vids out here, thanks a million 😎😎😎😎
@weekendrc3 ай бұрын
thanks
@Roseabovethis Жыл бұрын
I can tell you’re very particular and precise with this break in process… very clean for the entire set up. Plus you don’t want to rush an expensive engine not breaking it in properly
@weekendrc Жыл бұрын
Exactly take your time do it correctly
@Douger318 Жыл бұрын
just got that radio thanks
@weekendrc3 ай бұрын
welcome
@markgarcia8552 Жыл бұрын
What is the part # for the shocks
@uA_1905_hY Жыл бұрын
Hi brother, are the bullet connectors included in the box? I have ordered the T- version with deans connector for the battery but I need to solder the motor wire connectors. If not included, I should order connector therefore I'm asking :)
@weekendrc Жыл бұрын
No they don’t come with bullet connectors, you have to buy some that will fit your motor
@uA_1905_hY Жыл бұрын
@@weekendrc thnx bro, ordered some 4 mm bullet connectors