I personally prefer the snug fit of the Low-Profile hats, I hate that empty space on my forehead. New Era does have issues with their sizing, I'm going back and forth between two sizes.
@kayblock800916 сағат бұрын
I love the A frames from Culture Kings
@blackley90Күн бұрын
Hey good video! What size is the football?
@kayblock8009Күн бұрын
New Era - Fitted/snapbacks M&N - snapbacks 47 - dad caps/clean ups
@darrells18062 күн бұрын
Very nice hats, but why would I want to wear a baseball teams hat? Not a sports fan. It would be nice if they made hats with other logos besides sports teams.
@johnnypiper17174 күн бұрын
I jus got me a steamer for my hats, I've always shyed away from the 59fifty hats since they are so blocky now a days. I think I will jus have to get use to the steamer I got cuse I don't wanna burn my hat lol. How long do you think you usually need to leave it on the crowns to get it to wear the buckram is soft enough to form? Seems I have to get it pretty close to the steamer, you think it's easier trying to do one side at a time or both at same time?
@dreinthe6163 күн бұрын
It doesn't take much time if you hold it close to the steam source, probably less than 10 seconds to soften... and I'd recommend doing both at same time if you can hold it comfortably that way. Btw, I do have a couple of other videos showing this technique, you can find them on my channel page either on the videos tab or in the tutorials playlist, thanks.
@concernedcabbage90356 күн бұрын
I am so glad to see this. I thought I was going crazy - I have had to return three low profile hats because it wouldn’t even go all the way onto my head. It looked downright silly. I think there is also a quality control concern with the low profiles too
@ubonsolavong9996 күн бұрын
Wake up, people were going on to.hard time's
@ubonsolavong9996 күн бұрын
No, it's damn Bidenflation smfdh it's affecting caps now, FML
@cut40727 күн бұрын
Thx so much 😊 KZfaq #cut4072
@jordanxlongoria10 күн бұрын
Man I love the low profile hats. Wish they did a lot more of custom designs in low profile. But I agree there has been some inconsistencies with them, sometimes they are perfect, sometimes they are too low and rounded, and I’ve even had a few that were almost too tall more like a mid profile
@jcon21613 күн бұрын
I only buy the low profile 59Fifty or the 39Thirty. I'm not a fan of how tall the standard 59Fifty is, or how the bill is.
@samueldelcastillo2113 күн бұрын
The hitch already has a curved brim?
@dreinthe61613 күн бұрын
Yes, correct - every one I've seen does.
@truelow13 күн бұрын
I'm a low profile wearer and the quality control variation is insane. I ordered every SF low profile from last year and each one fits differently, even though they're all the same size. Crown shape, band sizing, bills are broken at times... New Era sucks
@dreinthe61613 күн бұрын
Agree - variation is a huge problem for them that only got worse as everything went to contract manufacturers... interesting you're seeing the same pattern with the low profiles.
@daysandwords13 күн бұрын
Honestly I can't understand why they don't just make every hat available as a 39thirty or at least a 9forty... I'm in Australia and we get a really strange selection here - but I bought a bunch of 59fifties when they were on clearance before they were going to go back to the USA (dunno why Lids ever thought MLB caps would sell here)... but Lids stores actually don't stock 39thirties at all, like literally, 0. Online has a few but only City Connect hats... And this isn't just an Aussie thing... New Era doesn't make a lot of their hats as a 39thirty... but it's such a perfect shape.
@dreinthe61613 күн бұрын
For sure, I've got some 39Thirtys that I really love when in the mood for that silhouette - the bigger collections do seem to feature them more often now, but certainly not every style.
@daysandwords12 күн бұрын
@@dreinthe616 Hi Doug - I've been slowly putting together what each hat is... and I was under the impression that a 39thirty and a 9forty were identical except that the 39thirty is stretch fitted and 9forty is adjustable (either snapback or velcro). Have I got this right? And is the 9twenty also like those, but with buckle adjustment and often cotton rather than polyester... or is that one a different shape?
@dreinthe61612 күн бұрын
@daysandwords Yes, I think you’ve gotten just about everything, except the big difference with the 9twenty - it’s an unstructured cap, so there’s no buckram in the front two panels. Definitely a classic dad cap - most similar to the ‘47 Brand clean up.
@daysandwords12 күн бұрын
@@dreinthe616 Ah yep, cheers for that. I love that there are people out there who share my enthusiasm for baseball caps. In Australia it's rare that anyone except Lids employees even realises that there are multiple brands.
@RRFineArt14 күн бұрын
I prefer the old one, with hight crown, and still more the hats made in the USA from the 90s
@kevinarthur848814 күн бұрын
Yes I’ve noticed this big time on the low profile hats… I mainly buy low profile exclusively just because it looks way better with my head shape than the standard ones. And man are they bad nowadays. They just hug your head to the point it looks downright silly. Maybe 1 out of every 4 actually look acceptable now. It’s a shame because they had them perfect before and now it’s a crap shoot on whether it’ll look right or not.
@dreinthe61613 күн бұрын
Right on, that's exactly why I decided to make this video - the Phillies cap was near perfect.
@Brad408314 күн бұрын
Is there a difference based on where the cap was made?
@Jgriffy14 күн бұрын
Yeah, China/Laos and maybe some other factories usually have a deeper crown and imo fit how a 59fifty is suppose to fit. Caps made in Bangladesh have a shallow, boxier crown and in my experience fit tighter than China made caps.
@Brad408313 күн бұрын
@@Jgriffy Is that true for low profile caps as well?
@Jgriffy13 күн бұрын
@Brad4083 I know low profiles can fit different since they come slightly pre curved but I havent heard of factory inconsistencies with the low pros like the normal 59fifties.
@dreinthe61613 күн бұрын
I didn't focus on that with these caps, but I'm going to check tags... I would have to imagine that there's some effect, but I probably have too small a sample size to say they are as inconsistent as the Standard.
@jeremys558714 күн бұрын
I think it could be the inconsistency of New Era in general. I have four of the low profile 59fifty caps, and they all fit and look different. My most recent one, which was a mesh-back Nationals cap I purchased in 2022, is by far the tightest and has the lowest profile, so there may be something to it.
@knp3314 күн бұрын
I actually really prefer the new low profile hats. Most of the regular crowns don't look good on my small head and often times feel as thought I'm wearing a top hat. The low profiles are the only ones I buy and that actually fit me appropriately.
@Brad408314 күн бұрын
I like the low pros, too. Many of the standard 59Fiftys look too big on my head. If the newer low profile is similar to the 39Thirty, I would be pleased. The shape of the 39Thirty is my favorite, but even the largest size is too small for my head.
@badsmac14 күн бұрын
Watch Doug’s other videos on shrinking the buckram on caps. The plastic inserts with steam are the best and that’s my go-to way to get my hats the way I like. I used to purchase low crown caps going all the way back to the 90’s but because of the profile issues that Doug spoke of I have had to stop. Now I get my 5950’s how I want them with a more rounded edge and not that bill board look.
@TheFrogChannel14 күн бұрын
I'm curious to see if the reshaped Low Profile eats into the sales of the 39Thirty. I'm a fan of the 39Thirty's shape and construction, but I'm not a fan of it having a stretchy headband. The new LP 59Fifty for me is the perfect combination of shape and comfort.
@dreinthe61613 күн бұрын
I can relate to that - sometimes I think those stretchy back panels and sweatband actually detract from the comfort, and they make it a little harder to put on/take off.
@JaredKroh14 күн бұрын
Nailed this one. Glad you called it out. Ordered a low pro last month and had to return it. Looked exactly like the Seattle one you showed. Too low and round for my liking.
@Matt-lx7xi14 күн бұрын
its dre day!
@dccelly161514 күн бұрын
I’ve tried on a low profile before and it just didn’t work with my watermelon head. I have to go 59Fifty.
@GeraltBosMang14 күн бұрын
I also found this perplexing when I first encountered this phenomenon. Initially, I thought it was just another defect, but it seems to be a norm.
@alimantado37314 күн бұрын
Im here in the UK is there any cap cl;eaners who will accept jobs from the UK? There are no cap cleaners I know of , even in the capital London?
@dreinthe61613 күн бұрын
You should look up The Captician, located in the UK... best found on Instagram. Sells cap care kits and also does cap restoration too - and I've done videos in collaboration too.
@jeffii989014 күн бұрын
How do I know if I'm buying a standard profile vs a low profile when I'm shopping online?
@Brad408314 күн бұрын
If it's low profile, it should specify that in the description. Otherwise, it's standard.
@joeg470714 күн бұрын
I have a bunch of hats like this and most of them are from the Laos factory. They have a real problem with too much volume in the crown and the bulging front panels. I have one from Laos, a custom Padres, with a "fielding Friar" side patch, that makes your Omaha Storm Chasers hat look like a low profile 59fifty. It's a really cool hat that I simply cannot wear.
@dreinthe61613 күн бұрын
I am impressed - referencing that Storm Chasers cap is a "deep cut" from my library - but now I know EXACTLY how you are describing that Padres cap. It's unfortunate when you get stuck with one like that... and I'll have to check my collection for any made in Laos.
@cosmiccowboy935814 күн бұрын
Anyone else notice that the sizes on the 59fifty aren’t always the same? I wear a 7 5/8 and mostly fits perfectly but I have maybe 50 hats and probably 5 are tighter than the others. Great to see you back
@Jgriffy14 күн бұрын
Yes, New Era is notorious for inconsistent sizing. I wear 7 1/8 and have a few that fit like a 7 that needed to get stretched and some that fit like a 7 1/4.
@condensedmic14 күн бұрын
Yes absolutely
@BroadwayJoeB13 күн бұрын
They’re handmade in a variety of countries and factories. Because of quality control issues the sizing can be inconsistent.
@dreinthe61613 күн бұрын
I did make a whole video about their size variation - here ICYI: kzfaq.info/get/bejne/l8uKY9Kdq7e1qZc.html - thanks!
@Scotty2Ballzz14 күн бұрын
Bro is Back❤
@KJRad15 күн бұрын
Love that black St. Louis Cardinal’s cap. I need one between 71/2-75/8. 🥲wishful thinking 💭
@dreinthe61615 күн бұрын
Thanks, that's a favorite of mine too, got it about 6-7 years ago, haven't seen it in the exact same combo since then.
@ShadySinisters16 күн бұрын
Does the hat stay stretched, or does it go back to its old size?
@dreinthe61615 күн бұрын
It stays stretched for a while, but sometimes I need to give it a refresh - sometimes 3-5 months later depending on how often you wear and/or sweat in it.
@aeormusic18 күн бұрын
Hey man, hope you’re doing well ✌🏼I’d like to know which steaming process would you recommend to curve corduroy hats, it seems like the fabric shrinks a little in some stitching points on the top of the visor, so I thought if it would be better to steam the bottom only and don’t touch the top of the visor
@dreinthe61613 күн бұрын
Well the main benefit of steam is that the moisture/heat combo relaxes the fabric, so theoretically it should be easier to stretch without any visible defects. But corduroy seems a little more dense, so you could try bottom only - the point of heating it is just to make the visor more compliant to curve without creating a lot of small cracks and fatigue. Thanks!
@walterlangkowski472319 күн бұрын
I think vevor makes a heated hat press from about 120 dollars I’ve been thinking about it
@dreinthe61615 күн бұрын
Thanks for the comment - looks interesting for crafting trucker style caps, but I'm not sure how useful it would be for the whole crown.
@brandonbennett232619 күн бұрын
Hi Doug. I've got some vintage golf hats (US open, etc) made my Imperial Headwear. I can't tell if the brim is cardboard or plastic. Do you have any experience with this brand?
@dreinthe61615 күн бұрын
Unfortunately I don't. Strange as it seems, the sound from tapping it with your fingers might reveal another clue.
@bronxguy198119 күн бұрын
A bunch of my fitted hats were close to the heater and now theyre all warped out any tips or tools i should buy to fix this or is it beyond repair
@bronxguy198119 күн бұрын
Al lso the bill of the hat is also warped
@dreinthe61615 күн бұрын
Maybe best thing to do is re-heat, especially if it's the visor. I've got a couple of visor curving videos on my channel... check those out and follow the process to heat and re-curve the visors.
@wickedflagon20 күн бұрын
I just used your video to help shape a giveaway Mariners cap I got recently; turned out really well, thanks!
@dreinthe61615 күн бұрын
You are welcome, glad I could help.
@meech60721 күн бұрын
Hats made in Bangladesh have a smaller more box shaped crown ! I noticed the ones made in china have a tall rounded crown & they don’t fit my head. I specifically only buy hats made in Bangladesh for that reason.
@ourcultureourmusic329922 күн бұрын
Problem with poly footed they do not stretch and mold to your head for a perfect fit They are constantly uncomfortable
@thecaptician23 күн бұрын
Great video, as always 🫡
@gmcsierra488924 күн бұрын
Your channel is so Underrated. You were one of the first to ever make instructional videos on shaping hats and using different techniques if not the first I’ve seen. Although there’s other people making videos on curbing the brim I still come back to your videos as a refresher when I need to shape a hat. 👍🏼🧢
@dreinthe61624 күн бұрын
I really appreciate those comments, especially since you know how long I've been doing it. Thank you!
@randylandichojr60725 күн бұрын
hello I keep watching your video.. can you pls guide me where I can find this 47 BRAND PRO Fitted😊
@dreinthe61615 күн бұрын
Unfortunately they have stopped making these now... maybe they just gave up on fitted caps of this style. I only ended up getting three of these before they disappeared. Now they only do the stretch-fitted "Franchise" model.
@RavenBayote25 күн бұрын
Thanks for the ADVICE CAP CKEANING I WILL JUST USE SPONGE AND WATER IM AFRAID OF USING DETERGENT PRODUCTS AS IT DESTROYS AND JUST MAKES MY FITTED CAPS WORST THANK UOU SO MUCH WATCHING HERE 2024👍👍👍
@dreinthe61615 күн бұрын
Yes, sometimes a damp cloth and clean water in a bowl is all you need. For stain removal, I have done other videos with the Captician, who makes a kit for deep cleaning. You can find those videos on my channel page.
@RavenBayote15 күн бұрын
@@dreinthe616 thank you for your advice!😎😁😁
@jacknjill300026 күн бұрын
The hat jack is a great idea since many of these fitted hat usually don’t fit and this way you can custom fit, like buying not hem pants and later hem to your liking,
@Posterharpua28 күн бұрын
Fucking insane to have to do all this shit just to wear a hat. Why can’t they make the hats less ridiculous from the factory? Nobody likes the boxy look
@dreinthe61615 күн бұрын
Actually you'd be surprised how many times I get comments asking me how to create the boxy look...
@voodoo700829 күн бұрын
We have a steamer for cleaning. I asked my wife if we have a nozzle with it, and we do. I’ll try this when I get some gloves specifically for the hats.
@Bojito1861Ай бұрын
My head measures 54/55 cm. I bought a 39THIRTY XS-S. Do you think it's okay?
@dreinthe61628 күн бұрын
Likely yes, although I was not aware of an XS/S size in the 39Thirty - but I see your measurement falls in that range on size chart at neweracap.com. Given variation of New Era caps, you probably have a chance that it's a little snug, but that'll be your personal preference if it's ok.
@voodoo7008Ай бұрын
I have a small collection of MiLB hats, and some of them could use this treatment if I can get the wife to lend me her dryer.
@jchcollinsАй бұрын
The only 39Thirty I’ve ever seen with the Batterman logo on the back is an old Cubs fashion cap, with one of the Cubby Bear logos on the front. I snapped it up, especially when I saw that - and still have it…
@dreinthe61628 күн бұрын
That's a good find!
@FlavioMuniz1904Ай бұрын
The best review of brim on the internet. Amazing. Normally I don’t even write comments, but this one needed it (btw, sorry for misspelling and logic in writing English, cheers from Brazil 🇧🇷). And when I saw that you had little views and likes, I began to write this comment. I was sort of “desperate” of knowing If my cap is cardboard or plastic. I was already searching “cut new era cap in half” to see if I found out 😅 Now I know what it’s made of, I can take the properly care. Congrats for the video, hope you have a lot of success
@dreinthe61629 күн бұрын
Hey thanks, appreciate the comments, greetings from the USA! You might be interested in other videos on my channel page... I actually did tear down an old fitted cap to look at how it was constructed.