Did you ever have issues with your lower control arm rubbing your rotor? I did honed development extended ball joints on mine and it hits the rotors on turns.
@MichaelFlare20 күн бұрын
@@OverlandJunkie1 - I never had that issue.
@miltain25 күн бұрын
what song was playing in the garage?
@MichaelFlare25 күн бұрын
@@miltain - at what time in the video?
@miltain25 күн бұрын
@@MichaelFlare 0:40
@MichaelFlare25 күн бұрын
@@miltain : Ian Van Dahl - Will I
@kingslakrАй бұрын
Is there anywhere we can see an update on how it looks today? how did everything hold up over the years? Durability wise
@MichaelFlareАй бұрын
@@kingslakr - I only had these parts in my car for like 5 months because it was only a temporary thing. I had all parts replaced with all black panels. The parts does get scuffed up white easily and can be rubbed away with water. It's kind of like scratching your skin with your fingernail; the skin scuffs up white but when you wipe with water it goes away.
@SessionEightyEightАй бұрын
I bought a civic that came with these bushings unfitted. Your excellent video was a great help, Thanks, really like your civic. 🙂
@Yaboii336Ай бұрын
Greatest content without a press exactly what i needed thanks boss 💪🏻u a legand
@FernandoHernandez-pj3fh2 ай бұрын
Man....I did drop the linkage and was about to drop the whole subframe. Thank you! Didn't think about pulling the steering in. 👍👐
@huktuned2 ай бұрын
Where we at now ?
@MichaelFlare2 ай бұрын
Still got it! Freakin love my EK so much. I only get to drive it like once every 1-2 months now. I cherish every moment with it now and look for every moment to take it out when I have time.
@huktuned2 ай бұрын
@@MichaelFlare very pleased been a great journey to share with you
@GrowDatSolja2 ай бұрын
Link to paint
@MichaelFlare2 ай бұрын
a.co/d/926vSQB
@GrowDatSolja2 ай бұрын
@@MichaelFlare good looking
@uhhpixsdy58403 ай бұрын
engine reveal? its been so long
@Macinvodakin4 ай бұрын
Background music are nothing but bangers!! Thank you for the walk through and explanations.
@d.phothirath50844 ай бұрын
Do you have to clear coat ?
@MichaelFlare4 ай бұрын
No because I didn’t want it to be glossy.
@d.phothirath50844 ай бұрын
@@MichaelFlare thank you for the quick reponse. I was just wondering if it would help the paint last. 😆👍🏻
@MichaelFlare4 ай бұрын
@@d.phothirath5084 - I think paint would last longer with clear coat to be honest.
@loboxx3374 ай бұрын
If the paint peels then its the paint 3m sucks.
@loboxx3374 ай бұрын
Excellent results, future project on the panels of my 1979 Chevy truck, thanks.
@Vitt4s4 ай бұрын
Hey Man! U doing it very nice! Could u help me please? We had a Similiar path... I scrap the more than 1 year doing repetitions only Taps and i basiclly IDK how doing Glides always fall to the front... 1. Whats the differences about your training and Science Learn Program? 2.Which part is the crucial to did 1-3 rounds without hands (from SLP)? HTF I balance?:D Which party of body what to do to keep balance) 3. What iam doing - And what u change on it? I did slow rounds half taps push myself off the ground with hands and push butt back and if it is too much i lifted my legs up. Thank you so much - I really want it. :D
@MichaelFlare4 ай бұрын
1. There is no difference. I did EXACTLY what the program shows to do. I'm not exactly sure I'm understanding your second and third questions. How come you're skipping some steps in the program? Why not do the whole thing. I spent 5+ years practicing headspins every single day on my own and was never able to do it properly and let go of my hands. This program took me almost a year but it work for sure.
@stefanocorti19704 ай бұрын
Wait a minute! This is the river you can see in "Deliverance" !!!
@MichaelFlare4 ай бұрын
Are you serious? Let me look it up. LOL I do know that that movie was filmed in Georgia.
@Joseph-hb8gb5 ай бұрын
The golden era 😢
@LegarageEnGravier5 ай бұрын
je vais faire la même chose sur ma rover,qui a le même train arrière que les honda. j'attends de réunir toutes les pièces que j'ai commandées au fur et à mesure et grace à ta vidéo,j'ai même trouvé une pièce supplémentaire,avec le bras inférieur réglable qu'on voit à 9:48. je pensais en acheter un d'origine,ais finalement j'ai pu en trouver sur aliex...ss. j'ai acheté là bas les silentbloc,les triangles inférieurs,les triangles supérieurs (pour le carrossage) et à l'instant les triangles pour le réglage de la chasse (toe control arms)
@gunthergunther75 ай бұрын
very informative and detailed, much appreciated. bonus points for linkin park in the background lol
@RichardR8765 ай бұрын
Inspiration
@montglock_5 ай бұрын
Nice video bro!
@mattfleet24115 ай бұрын
Was this gloss black or flat black Dupli colour?
@MichaelFlare5 ай бұрын
Flat
@BigDreamsGarage6 ай бұрын
Those door cards looks in perfect shape are they aftermarket?
@brad.tripleog_jamaica3846 ай бұрын
Hey bro, Which site you bought the polyurethane bushings from?
7 ай бұрын
How did this stand the test of time?
@MichaelFlare7 ай бұрын
I only had these parts in my car for like 5 months because it was only a temporary thing. I had all parts replaced with all black panels. The parts does get scuffed up white easily and can be rubbed away with water. It's kind of like scratching your skin with your fingernail; the skin scuffs up white but when you wipe with water it goes away.
@tacticalsamurai98517 ай бұрын
When you got the paint job you kept the door jams oem silver? I have the same ek dx in silver too will go for championship white
@tacticalsamurai98517 ай бұрын
I love how he didnt convert the front end to the 2000 model. I just got a silver ek hatch 1998 model and will be doing the same clone for my car slowly but surely one day week month year at a time. Will be a project for me and my 5 yr old son. Got the ek hatch local with stock d series motor for $1250 needs a lot of work but will get to where you are at
@tacticalsamurai98517 ай бұрын
@@MichaelFlare i actually am torn between the two lol. They both look too good lmao. But im on a budget and the original setup I have now fits the budget.
@v-modsolutions69468 ай бұрын
Junk, been there done that, they are noisy and wear out in the center where that rod goes. If your going to go through all that, you might as well replace them with new actual replacement units....you will feel the difference right away and no noise or wear. premature
@BIackoutPhantom8 ай бұрын
How does the plastic look after getting some sun on it?
@MichaelFlare8 ай бұрын
I only did this because it was a temporarily interior look until my real black interior panels came in a few months after. I no longer have any of these pieces inside my are because it has all been swapped with the real items. During those few months of having these inside, I can tell you that it didn't chip nor flake off. However, the panels scuff very easily. It's exactly like taking your fingernail and scratching it across your arm. It turns white but when you rub it away, it will come off just like your scraped skin. The painted panels have the exact same effect.
@ismelester86068 ай бұрын
But overall you did a good job
@ismelester86068 ай бұрын
Thank you 😊
@ismelester86068 ай бұрын
The music turn it off so we can hear you better dude
@mrcaffein8 ай бұрын
9:54 torque specs
@sincerewhite19338 ай бұрын
Found you on FB
@sincerewhite19338 ай бұрын
Wow, first time seeing this. Great job. Could this be done on a 93 accord? I have a project idea. Not sure if this site is used anymore. I tried to find you on FB but there's lots of pages with the same name. I could use all the advice and help
@fukbiden248 ай бұрын
So i purchased Prothane energy bushings and installed them now i noticed my hole trailing arm And bushings are sliding side to side on my dog bones any clue what i did wrong?
@MichaelFlare8 ай бұрын
Maybe the bushing is the wrong size? It's supposed to be super snug fit.
@nahshondorasami99549 ай бұрын
God bless this man soul...came in clutch the the video. I really need sway and help me understand more on what i need to do.
@nahshondorasami99549 ай бұрын
Do you have the link from where you bought the sway bar kit from?
@Flushandfit9 ай бұрын
Cheap and easy. Ima try
@04tacomaguy110 ай бұрын
You have really good music taste by the way!
@LD_Builds10 ай бұрын
Well I'm going to paint the civic interior black.. I did paint my wiper arms black today.
@04tacomaguy110 ай бұрын
Do these re use the stock top hats? Or do they send everything you need for install.
@ashleybanuelos828910 ай бұрын
How can I take off dupli color, from plastic trim??
@MichaelFlare10 ай бұрын
Aircraft paint remover/stripper.
@04tacomaguy110 ай бұрын
Ayyye ayy mad cause I sing from my soul
@fernandosotelo90910 ай бұрын
Eg also ?
@MichaelFlare10 ай бұрын
I'm not sure about EG. I really think it'll work though because DC2 and EG share the same chassis parts. I could be wrong though.
@MrKeran2210 ай бұрын
Now you making me wanna try this, hope my headlight don’t damage
@linorodriguez851110 ай бұрын
Kill car excuse what I gona say not trying 2 hate wit what I'm saying but I have more respects 4 Asians (Chines Japanese) that represent there product Hondas Toyotas what not I c alot of Asians forgot about there culter (cars) and c them drive BMWs Mercedes it's like there ashamed of there car culter u sticked wit Honda as an Asian so my respects apart that da white ppl r stepping at Asians 4 COVID more of a reason Asians shouldn't get American or Europeing (Mercedes BMW) product if anything dust da American cars wit u Hondas I drive a CRX and as much as I hate 2 accept da truth I raced 2 Asians (Chines Japanese) they were driving another Honda also a hatch back and I hate 2 say it they beat me I'm a proud Mexican but Honda Power all da way don't sell u car enjoy it
@robertgracia515810 ай бұрын
Was it worth painting or is there a better option
@MichaelFlare10 ай бұрын
Best option is to honestly replace the interior panels with a model that comes with the color you want. Nothing beats how the factory does it in both quality and look.
@robertgracia515810 ай бұрын
If you still have the car you duplicolored can you make a video on how it held up?
@MichaelFlare10 ай бұрын
I only had these parts in my car for like 5 months because it was only a temporary thing. I had all parts replaced with all black panels. The parts does get scuffed up white easily and can be rubbed away with water. It's kind of like scratching your skin with your fingernail; the skin scuffs up white but when you wipe with water it goes away.
@tot963511 ай бұрын
I needed this video so badly very informative thank you very much
@skewz11 ай бұрын
Hi Michael, are you aware of the latest news of Yardbrah?