Пікірлер
@andrewvansistine1722
@andrewvansistine1722 54 минут бұрын
Hey! Looking at a few unibody SUV options that will let me securely use a hanging bike rack that needs a good platform for some tongue weight to hold several bikes. Just curious if there is any midsize SUV that has a better or more secure interface for the hitch mount than another. Highlander, Pilot, Explorer, Telluride, and Pathfinder are options. Any experienced input on what might be a solid option if I can’t pick up a body on frame like a 4Runner?
@johnwilburn7173
@johnwilburn7173 Сағат бұрын
This video was perfect. I watched it and was able to install a tow hitch on my wife's 2016 Explorer without any issues. Thank you so much!
@BrendaBowen-g7v
@BrendaBowen-g7v 2 сағат бұрын
How can I get a key out of the lock that is stuck in the lock????
@stevejackson5105
@stevejackson5105 3 сағат бұрын
good job
@vapeurdepisse
@vapeurdepisse 8 сағат бұрын
Go OEM or go home. This is ugly
@alainst-pierre9881
@alainst-pierre9881 10 сағат бұрын
Hi will this fit on a kia sportage 2024 Thank You ?
@Canuckplumber83
@Canuckplumber83 10 сағат бұрын
We jave a 2023 Ascent with the dealer installed tow package with the 4 or 7 pin connector. We will be picking up a pop up camper in a coupke weeks. The rv dealer will be adding a brake controller, but they asked me if it gas a "hot" wire. I would assume so? Fairly new to me.
@georgesantana8190
@georgesantana8190 12 сағат бұрын
Would that same model fit a 2011 Toyota rav4? I’ve seen other videos that most models fit 2006 to 2018 Toyota rav4s. Can you confirm?
@1111oakley
@1111oakley 19 сағат бұрын
Great video, thank you
@MrAdoons
@MrAdoons 20 сағат бұрын
Does it work on 2019 sorento lx , awd v6
@MrAdoons
@MrAdoons 20 сағат бұрын
Thank you for the video
@albertlagerman
@albertlagerman Күн бұрын
What size are those bolts? Also, what is the factory torque specification?
@albertlagerman
@albertlagerman 6 сағат бұрын
M12 - 1.25 x 40 79 ft-lbs
@desireenavarro9981
@desireenavarro9981 Күн бұрын
Great install video!
@michaelverive4807
@michaelverive4807 Күн бұрын
Thanks - made the installation a piece of cake!
@AngelMartinez-gt7sc
@AngelMartinez-gt7sc 2 күн бұрын
Very nice video 👍
@juiswhoiam1149
@juiswhoiam1149 2 күн бұрын
Anyone else notice the makeshift cutout in the real panel at 3:08?
@trailerhitches
@trailerhitches 2 күн бұрын
This Vehicle was used for two Hitch install videos. The Second install required a cutout. The Measurements shot was not filmed on the first(CMF13472) hitch so we had edit in footage of the second(CQT76453) hitch. Video seen here: kzfaq.info/get/bejne/erl8p5SF38udpmw.html. I prefered to leave the drawtite hitch installed for the pre welded Bracket Flange to Hold the 7 way wiring. Seen here: kzfaq.info/get/bejne/eNWWZ9CrxL7OdHU.html. Good eye, But this cutout does not apply to this Video!
@juiswhoiam1149
@juiswhoiam1149 2 күн бұрын
Ah thanks for the explanation because I was a bit concerned after seeing that.
@michaelmendez9910
@michaelmendez9910 2 күн бұрын
Is a step side different?
@trailerhitches
@trailerhitches 2 күн бұрын
No, This Hitch fits the 1994 Cherevolet 1500 "Sportside" Truck as well.
@soothingsounds7491
@soothingsounds7491 2 күн бұрын
I get the feeling that woman with the bracelet and silky soft hands has never installed a fifth wheel hitch before, but was selected for the video despite the fact she (DEI) Didn't Earn It...I think the guy who "helped" her was actually pushed out from speaking in the video for political reasons.....Now you see how Uhaul rewards their employees, by pushing them aside for political servitude. For shame, I will now NEVER use Uhaul again. I don't support DEI Communism.
@trailerhitches
@trailerhitches 2 күн бұрын
You would be wrong! Royal is super capable and loves installing Hitches! seen here: kzfaq.info/get/bejne/fq2JeqVz073Qg3U.html and here kzfaq.info/get/bejne/qtKXkpdk392shok.html and here: kzfaq.info/get/bejne/ibeIprhy36e1kmg.html Now maybe I will schedule her back for another video this fall. Thanks for the Tip.
@TommyShelby-ps2tc
@TommyShelby-ps2tc 2 күн бұрын
Why is it called a hitch and not a bitch
@davidsuk1516
@davidsuk1516 3 күн бұрын
Can I contact you? I want to install the hitch to my 2022 Sienna XLE. Thank you!
@trailerhitches
@trailerhitches 2 күн бұрын
Visit us online to schedule an installation with your local U-Haul Hitch Pro: www.uhaul.com/Trailer-Hitches/
@MrAdmiralDrew
@MrAdmiralDrew 3 күн бұрын
Great video, thanks! Do you have a video for installing the electrical hookup?
@trailerhitches
@trailerhitches 2 күн бұрын
Wiring is a separate part and therfore a separate video. here is the Link: kzfaq.info/get/bejne/btmbZ6pntdmtcmQ.html
@annanelson9072
@annanelson9072 4 күн бұрын
Where does the pin go if it’s the smaller hitch?
@trailerhitches
@trailerhitches 4 күн бұрын
You Must remove the adapter as i do at 0:25 in the video. And then still insert the locking pin into the driver side and tighten the Anti-Wobble knob.
@Dieartze1
@Dieartze1 4 күн бұрын
Thanks for this video.
@trailerhitches
@trailerhitches 4 күн бұрын
You're welcome!
@freebird1963
@freebird1963 4 күн бұрын
Does this fit higher up then a Curt one so that less chance of road scraping ? If so how much higher ? Thanks and good video and info.
@trailerhitches
@trailerhitches 4 күн бұрын
Unfortunately, I do not have the Measurements of the Curt reciever to the Ground. I can only tell you its very low and we added this Hitch as an option on this vehicle for that reason. It is the Highest Clearance Reciever We have. 12.5" from the Ground is better than some sedans! This is the WAY!
@salahhadwan2434
@salahhadwan2434 4 күн бұрын
Do you provide the boards?
@trailerhitches
@trailerhitches 4 күн бұрын
Check with your rental Loacation!
@OmarIbnSayyid
@OmarIbnSayyid 4 күн бұрын
Great video. Thanks
@trailerhitches
@trailerhitches 4 күн бұрын
You are welcome!
@StevenPruitt-e5w
@StevenPruitt-e5w 5 күн бұрын
What’s the specifications for torque on the bolts
@trailerhitches
@trailerhitches 5 күн бұрын
They are in the Included directions in the final steps, as well in this Link: www.uhaul.com/publication.ashx?fileName=CQT76583.pdf&digest=Xo94NOtNGpdg7P3OZcITg
@nishafoerstner1473
@nishafoerstner1473 5 күн бұрын
Thank you! Now I know why it costs so much to install after market! OMG! Need the right tools and knowledge.
@trailerhitches
@trailerhitches 5 күн бұрын
This is a cakewalk compared to lots of hitches. To schedule an installation visit us online: www.uhaul.com/Trailer-Hitches/
@kristianharada9514
@kristianharada9514 5 күн бұрын
This video is great! 👍
@EvgenyVinnik
@EvgenyVinnik 5 күн бұрын
Thank you for this video! Very useful!
@trailerhitches
@trailerhitches 5 күн бұрын
Glad it was helpful!
@jefffleaglesfan5207
@jefffleaglesfan5207 5 күн бұрын
Should it take 4 hours for them to do this? Ive been at the uhaul since 8am was first on the list and at 12:11 (as im writing this) its still being worked on is this normal i understand things take time but the woman at the desk told me 2-2.5 hrs and im getting closer to 4.5 at the moment
@trailerhitches
@trailerhitches 5 күн бұрын
What Location is your hitch being installed at. I will see if I can provide them assistace!
@heathersledge9732
@heathersledge9732 Күн бұрын
For a kia telluride that is normal
@bamalongboat8193
@bamalongboat8193 5 күн бұрын
Great video... very professional....thanks
@trailerhitches
@trailerhitches 5 күн бұрын
Thanks for watching!
@danshilling4240
@danshilling4240 5 күн бұрын
They forgot to mention that you need to enlarge the access holes. If you don't enlarge the access holes in the frame of the equinox you won't be able to put the plates and the bolts through the access hole so that you can install the hitch. You can't even start the installation until the holes are enlarged this should be mentioned immediately before starting the video installation. It should also show her enlarging the holes....
@trailerhitches
@trailerhitches 5 күн бұрын
This Video and steps within pertain to the Drawtite hitch #CQT76419 that do not require hole enlergement. Directions and specs : www.uhaul.com/publication.ashx?fileName=CQT76419.pdf&digest=/4LwgtU2ozhx3tD8EzEuiA Here is the Video for the Curt hitch #CMF13439 that does require hole enlargement. It can beseen at 1:43 kzfaq.info/get/bejne/Y9xxiM9qx5jSmmw.html
@danshilling4240
@danshilling4240 5 күн бұрын
@@trailerhitches the access holes I'm talking about are the ones that are in the frame you have to make them bigger so that the plates and the bolts fit through. Not talking about the holes in the hitch😉
@mickyharries7648
@mickyharries7648 5 күн бұрын
Great video. Really appreciate the help!!
@trailerhitches
@trailerhitches 5 күн бұрын
Glad it helped!
@mickyharries7648
@mickyharries7648 5 күн бұрын
very good video thank you.
@trailerhitches
@trailerhitches 5 күн бұрын
You are welcome!
@ryancordle3625
@ryancordle3625 5 күн бұрын
Just did my install watching this. Good news. If you don't want to, you don't have to lower your exhaust, just did it alone using a car jack to help lift to the bolts
@trailerhitches
@trailerhitches 5 күн бұрын
Lowering the Exhaust is for ease of installation, so for us hitch pros that do 5-7 hitches a day we need this ease of access. Thx For Watching!
@trigun7469
@trigun7469 6 күн бұрын
What is the wiring diagram for the input sensors?
@trailerhitches
@trailerhitches 5 күн бұрын
We test the vehicles wires to determine functionality because wire colors can change. Use the ZCI stop sensor unit to test each wire individually. Remove the fuse for 5 seconds between tests to unlearn the stop sensor and testa new wire. Once functionality is established you can install and Begin learning mode.
@DL-sy5fv
@DL-sy5fv 6 күн бұрын
What is the clearance (ground - handle)when it is in use position ? If I live in a building with underground parking , would it scrape the ground?
@trailerhitches
@trailerhitches 5 күн бұрын
The Bike racks Clearance is Based on your Vehicles Hitch reciever Height. I cannot answer that for you.
@DL-sy5fv
@DL-sy5fv 5 күн бұрын
@@trailerhitches i own a sedan . I would like to have an idea .
@trailerhitches
@trailerhitches 5 күн бұрын
Again, The clearence of the bike rack is dependent on the Height of your vehicles Hitch reciever. I do not know how high of the ground your reciever is, but the rack will sit a few inches higher than that. If departure angle in a parking garage is a concern then look into a hanging style rack. kzfaq.info/get/bejne/p85dq5qhudendYk.html
@joschmoefrompickletoe2562
@joschmoefrompickletoe2562 6 күн бұрын
What kit did you use?
@trailerhitches
@trailerhitches 5 күн бұрын
CMF56367 www.uhaul.com/Trailer-Hitches/
@joschmoefrompickletoe2562
@joschmoefrompickletoe2562 5 күн бұрын
@@trailerhitches ty great video
@benkanobe7500
@benkanobe7500 6 күн бұрын
What about the required module in the trunk spare tire compartment that must be installed?
@trailerhitches
@trailerhitches 5 күн бұрын
Some Models Already Contain The Module like the one seen in the Video. If you order the Proper Kit it should contain the parts and directions for installation. It is Likely Behind the Passenger Side Trim like it is in the Newer RX350's.
@syndeywilliams7540
@syndeywilliams7540 6 күн бұрын
Cayenne is one of the most stupid cars u can buy. An expensive off road vehicle with no hitch nor roof rack😂. Bringing ur bike along becomes stupid coz ur car is stupid. Buying this car is like screwing urself in the ass. The engine is weird and only takes the most expensive octane. Everyday i drive mine, i would hear a weird sound i've never heard yet. U then go under the hood to try and find out..... and shit....u can't see shit, coz they covered everything. what a German engineering...the Porsche designers must have been smoking crack when they were designing this car coz it seems like they confused the word masturbate with masterpiece.
@bert1913
@bert1913 6 күн бұрын
How about to two relays that go on the drivers side under the hood?
@trailerhitches
@trailerhitches 5 күн бұрын
Some Models Include these relays from the factory. visit us online to purchase a set if your model did not include them. www.uhaul.com/MovingSupplies/Wiring-Lights/Tow-Vehicle-Wiring/Nissan-Relay-Kit/?id=6423
@todoutah
@todoutah 6 күн бұрын
Video doesn’t explain anything about the small box that connects to the power cable . I safely screwed it into a spot but it may be too exposed. What do you recommend?
@trailerhitches
@trailerhitches 5 күн бұрын
Its a water resistant Plastic box. As long as it safe and secure and you dont go Scuba Diving in your Nissan you should be OK.
@xxxdpgxxxx1389
@xxxdpgxxxx1389 7 күн бұрын
What’s the torque specs ?
@aprilmay6166
@aprilmay6166 7 күн бұрын
Do I need to disconnect the battery before beginning? (No) I didn't disconnect. Worked fine. And my 2013 Soul didn't match the set up in this Soul. Other comments has shown why.
@trailerhitches
@trailerhitches 5 күн бұрын
The included Directions recommend removing the Negative terminal of the Battery.
@ProBarber213
@ProBarber213 7 күн бұрын
This product sucks… Velcro ??? Really??
@PRICEX
@PRICEX 8 күн бұрын
Great video. Thank you
@trailerhitches
@trailerhitches 5 күн бұрын
Glad you liked it!
@S1I2D
@S1I2D 8 күн бұрын
Will this work for the 2015 Avalon?
@trailerhitches
@trailerhitches 5 күн бұрын
Yes. The Camry and Avalon are built upon the same platform and this hitch fits your vehicle. The Directions will call out any additional or unique steps. This Video should be similar. The Avalon specific Hitch install Video Coming Soon!
@aetheon9906
@aetheon9906 8 күн бұрын
This is a really excellent production... no fluff, just well delivered, easy to follow instructions, with excellent camera angles backing them up. I wish more educational videos followed this exact format. Great presenter too.
@trailerhitches
@trailerhitches 5 күн бұрын
Glad you enjoyed it!
@Niranjan_Desai
@Niranjan_Desai 8 күн бұрын
This is a great video, thanks for sharing.
@trailerhitches
@trailerhitches 5 күн бұрын
Glad you enjoyed it!