the T3 brush i droped it on the bathroom floor i cracked the handle i am going to replace the handle and save the T3 Knot with the new ShaveRite 210 shave brush handle the glue i am using was gorilla epoxy glue 10mins band thanks for writing hugs wheelchair larry

These are excellent blades, very underrated

How you doing its been almost three months since i last seen you your the science teacher im never gonna forget 7th grade science I'd say probably the most fun one i dont think im ever gonna have as much fun im other science classes then i did in yours❤

Hi do you think i could use a 18mm knot on a 19mm inside handle hole diameter?

You should do a tutorial on how to sharpen and use a straight razor

should use a mask no what type of resin you use

Thnx

Thnx

What is the best half blade razor financially .how do u view yaqi when compared with leaf and parker half razor blades.but i personaly feel straight razors r best for any purpose but they r good in the barbers hand and personaly feel it cant be on onself becoz possibility of cutting yourself .hve u something very best for pubic and underarm hairs? Pls let me know?

Gillette Yellows, Pesonna Reds and Nacets are my top three. Curious as to how you rate the Blacks!

Thank you Bro! I'm going to buy this razor one of these days. Greetings from Ukraine!

Bradar are prashar limit plise

Thnx miss ya 👍

Thank you for this video and may I ask what is difference when you put pressure because I see a lot videos in vacuum chamber when people low pressure?

HERE IS AN EASY WAY TO DO IT MY FRIENDs" I Do any Shave Pucks or hard Soaps are going to work? You can mix and match old Soaps? to fit in any Mugs or Cups that you like to use. Like (Mitchells' Wool Fat or Arko Shave Soaps just to name a few of the ones you could use?) Cut the bar soap up on a paper plate, pour the soap, shavings and chunks from your plate , put in a mug, cover the soap with a small amount of water, microwave for a minute or so? If it foams up, STOP. The water keeps it from burning itself up. (DON'T OVER WATER YOUR SOAP??) Easy, does it? Let cool don't want to Crack the Mugs or Cups you're using? (You just want it to Congeal in your Mug or Cup') let it cool in place. it is very hot and watery'''''. after it cools. place in the Sun, until the Soap hardens? When using your soaps use Dry Brush Less Water. the soap will be thicker and easier to use. For its (Price Point?)' (I use Dove Bar Soaps?) (Use any Soaps Out there ??) Save your Money, Spend it on your wife, Don't listen to the shave Mafia. I have been doing this for the last 20 years it saves me time and Money in these Inflationary Times Wheelchair Larry Merry Christmas

Love slants, my favorite's the wunderbar.

The best Shave Brush on the market today is my Simpson Trafalgar's T-3 better then boar cheaper in the long run it is 29mm. i mic it' it's like buying a $275 badger hair brush, no cleaning the brush, no need for a brush stand, fast drying time, well not fall apart like a badger hair or boar can, cheap to buy, I have owned it for 5 years with no hair loss with no problems wheelchair Larry Merry Christmas

Switchback 400 i repotted my brush with T3 Trafalgar 29mm knots i use b7000 glues are the best easy to use no mess no glass strong cheap best saling hugs Larry Merry Christmas

Do any Shave Pucks or hard soaps are going to work?. You can mix and match old soaps? to fit in any mug or cup that you like to use. like (Mitchells' Wool Fat or Arkos shave soaps?) Cut the bar soap up, put in a mug, cover the soap with a small amount of water, and microwave for a minute or so? if it foams up, stop. the water keeps it from burning itself up? (DON'T OVER WATER YOUR SOAP??) Easy does it? let cool don't want to crack the mugs or cups you're using? ( you just went it to congeal in your mug or cup') place in the sun, until soap hardens? When using Dry Brush more Water. For its (price point?)' (I use Dove bar soaps?) (use any soaps Out there ??) save your money spend it on your wife don't listen to the shave mafia.try to save people money in these inflationary times wheelchair Larry Merry Christmas

the best brush on the market today my Simpson Trafalgar's T-3 better then boar cheaper in the long run no break in, no need to soak it all day, ready to use, no weekly cleaning, no brush stand needed, easy on your face biggest brush at that price point .my I mic it its 29mm.' it's like buying a $275 badger hair brush, no cleaning the brush, no need for a brush stand, fast drying time, well not fall apart like a badger hair or boar can, cheap to buy, I have owned it for 5 years with no hair loss with no problems wheelchair Larry Merry Christmas

better then boar cheaper in the long run no break in .my Simpson Trafalgar is the best brush on the market today it's like buying a $200 badger hairbrush, no cleaning the brush, no need for a brush stand, fast drying time, well not fall apart like a badger hair or boar can, cheap to buy, I have owned it for 5 years with no hair loss with no problems wheelchair Larry Merry Christmas

my Simpson T3 Trafalgar is the best brush on the market today it's like buying a $200 badger hair brush, no cleaning the brush, no need for a brush stand, fast drying time, well not fall apart like a badger hair can, cheap to buy, i have owned it for 5 years with known problems wheelchair Larry

Simpson T3 Trafalgar my handle cracked to repair it i used B7000 Glue to repair the handle the glue is waterproof wheelchair Larry

Nice shave. Please can you share a link to the BRUSH?🙏🏾

He's my science teacher 😹

You still recommend this razor? I currently have QShave dustable razor

I use this razor every day and I love it. 1 pass and I'm ready for the working day. I got the pistache handle.

If you’re spending your own money, it’s up to you from whom you buy products.

Nice thanks for the information for the omega shave brush

I love that pineapple formula ! Great vid !

Suggestion: Back the camera up a bit.

My guess is gluing a knot in with hide glue would work best and be removable with steam. If using epoxy you will need to soak it in acetone for I would guess 24 hrs at least next time you want to change it. Dry hide glue lasts forever. Just saying. Thanks for the video!

My SE yaqi's center post made the blade pivot as the blade didn't sit on the blade posts . I cut it back with a Dremel and now it's a lot better ,Still aggressive but far better than before. PS have you tried the Double open comb Yaqi? It looks like it's from the game of swords, but its gentle and gives a fantastic shave.

How was the slickness? They sell it here for $12 at Whole Foods. Good video.

Great video. We manufacture the solid Aluminum No.3 Dubl-Duck style which is a 22mm handle and we use 20mm x 63mm knots with specific style nylon spacer to determine the loft and backbone that we want for different types of knots.

Looks like Phoenix Artisan has ditched the Duro. What is your current fave?

Yo! I have sensitive skin. Good razor for me?

Is it ok for synthetic knots also ? Î mean is not the steam destroying the synthetic knot ? Thanks

Crazy! I was actually on your etsy store first, and came to youtube to look into replacing knots as a result. Neat serendipity!

Hi Charles, I just found your channel and subscribed. Nice content. Regards, Glenn

Holy shit I barely remember subbing to you but I used to have you as a science teacher in 7th grade😂😂

what blade are you using it is a normal DE snapped in half?

Baby talc/wipes is what it smells of to me

Did not work on my Vulfix brush. How long does it have to get steamed for?

My mother used alum when making piickles!

It literally reminds me of a old wooden wagon wheel in a log cabin that spins water. I love it !

I love my King C. it's mild and smooth to use. hope everyone gives it a try.

Bwc

I had one of these,I didn't like it at all

thank you for this vid I need to take my knot out of my chisel and hound handle because its set in way too deep. At first it was a pain to break in because the knot was super dirty and took forever to get all the dirt out and now soap and water get trapped deep in the knot where its glued in.