Dude you said you were going to show us the reset on the AC but you didn't???
@nelsonfeliciano97178 сағат бұрын
NICE !!
@c.nicholson353610 сағат бұрын
Awesome video! Thanks! I’m dealing with the same thing. I think I’m gonna try your design. I’m surprised there aren’t more after market linkages like this.
@chrisblanton108710 сағат бұрын
Mine doesn’t stay on all the time it just turns on randomly and dings every time it does. It drives me absolutely insane.
@ApacheRanch10 сағат бұрын
I hope you figure it out! Perhaps a wire is loose inside one of the canon plugs under the seat?
@chrisblanton10879 сағат бұрын
@@ApacheRanch it’s a 2004 it doesn’t have weight sensors under the seats. Would it still have a plug under the seats?
@ApacheRanch9 сағат бұрын
@@chrisblanton1087 I have a 2003. I believe that there is a canon plug under there with a bundle of wires. Not sure if related to the air bag or not. But your description just feels like a wire is in/out based on vibration in the truck or something. I have had a bad wire before that was not seated right in the larger canon plug. Good luck!
@chrisblanton10879 сағат бұрын
@@ApacheRanch sounds about right obviously upon driving, and it rides like a log wagon 😂. I’ll check it out, thank you brother.
@boschman386412 сағат бұрын
Where is hulk?
@Contreras-z4e15 сағат бұрын
Always use pick up trucks for towing but now having an SUV I got the dreaded bump all that stuff Thanks for solution
@cscomputer1-d1k17 сағат бұрын
should of not sped it up for someone wanted to physiclly see how to take it apart
@The_Shepherds_SheepКүн бұрын
This was my worse enemy in 6th grade Pre-Athletics but now it's easy...ONE DAY YOU WILL GET THERE!
@ApacheRanchКүн бұрын
Hahahaa yes right!
@X.X.7.Күн бұрын
We’ve had 3 and all of them failed.
@royrichardson9164Күн бұрын
Mines don't have the button up there but the lift gate is powered. I use to be able to push the button on the tailgate and it would open right up. Now all I get is a click and it want come open
@sleemshaydeeКүн бұрын
This works.
@kevindovesuperКүн бұрын
You guys are so full of shit! I can spin the shit out of either one of my master locks and you cant feel a damned thing to use to figure out the combo
@brindonneiers4692 күн бұрын
Your video saved me about $600. Thanks for helping this single mom stay on the road. That last passenger side plug hurt my feelings. 😅
@scottk97922 күн бұрын
Holy crap, had this issue all summer and just a simple switch. Thanks for sharing.
@ApacheRanch2 күн бұрын
Glad it helped!
@recj9492 күн бұрын
That thing is a piece of c..p, it worked 3 times with quite energy to make the string roll. I nned to clarify that I did what was supposed to be done to roll it. Now the string doesn't pass trhough and I need to dessasemble it and roll it by hand. I prefere the old method, you pay less for the part and it works.
@alchampion3402 күн бұрын
You ought to try putting a skater Skidder tire on a rim
@offroader87232 күн бұрын
This was very helpful
@ApacheRanchКүн бұрын
@@offroader8723 glad it helped!
@dylanmillay2 күн бұрын
Replaced my board and still no power to tv. I’ve also tried different power cords I had laying around. No luck
@Deamonas2 күн бұрын
i remember doing combo locks years ago and by the looks of it they are the same just bigger
@busbwoy26102 күн бұрын
Great video and suggestion for resetting a Sony receiver. My Bluetooth started making a horrible clicking noise with no ability to play music and this reset did the trick to fix it. Thanks.
@ApacheRanch2 күн бұрын
@@busbwoy2610 that’s great!!!
@pietrogazzera57332 күн бұрын
Please, this time don't fire on medivac!
@Blackbird_803 күн бұрын
Dont be like me and try to pry out the old studs with a pick tool, I caused some fireworks.....
@aashishgupta63253 күн бұрын
How to clean this washer? I do o not see the filter at front like in other videos. Is there a video on cleaning this washer?
@1976ARTAN3 күн бұрын
Thank you sir
@smitty27213 күн бұрын
I have tried more than one of these video instructions to no avail with two combination locks I have. My fingers are sore. I have gone back and forth. sometimes I get the same numbers and sometimes I get different numbers. It is not working for me. And I think it is time for me to go buy a new lock.
@deannaclifford11774 күн бұрын
This solved my problem as well. Thanks, very clear instructions. Other than losing one screw in the machine and almost losing the other, it worked!
@ApacheRanch4 күн бұрын
@@deannaclifford1177 yeah those stupid screw are small!
@klaudiad60534 күн бұрын
How do you get that safety flap off? Does the whole assembly have to come out just to open it?
@michaeltaylor15724 күн бұрын
Does it spin counter clockwise when you use it ?
@ApacheRanch4 күн бұрын
Yes
@michaeltaylor15724 күн бұрын
So when you re spool it , you want to spin the top also counter clockwise so it comes out easier when you tap it on the ground ? New at this lol
@ApacheRanch4 күн бұрын
@@michaeltaylor1572 when it is flipped over, and you are looking at the bottom of the head, you are spinning the wheel clockwise and holding the top firmly.
@helmutmair82395 күн бұрын
Thank you!
@kevinhoock97425 күн бұрын
Does the clip come off easy ?
@ApacheRanch5 күн бұрын
Yes, you don’t need any tool or anything. Just pinch the plastic clip on the plug and pull it out.
@nickdalessandro11915 күн бұрын
Thanks for a simple, direct explanation of the fix. Wish everyone followed your video technique! Was very helpful.
@ApacheRanch5 күн бұрын
@@nickdalessandro1191 thanks!!!
@Ruckusism5 күн бұрын
Could a faulty switch cause microwave to not power on ?
@ApacheRanch5 күн бұрын
@@Ruckusism yes, absolutely
@Ruckusism5 күн бұрын
@@ApacheRanchokay thanks guess I'll be replacing the switches. The door switch has been acting up occasionally for some time now. It Flipped the breaker the other night but didn't blow the fuse.
@ApacheRanch5 күн бұрын
@Ruckusism I’ve seen most all issues with dead microwaves are related to those door switches. There are multiple on the door so look close.
@NewYorkCity6465 күн бұрын
Hopefully this works for me. I just bought a box of 500 of these untested/returns off of Whatnot for $15 lol
@walkingmyth8136 күн бұрын
Gave you a thumbs up for that info however it’s completely not working for me. I’ve had them plugged in continuously and it’s still blinking… I’ve checked the power cord and that’s all functional. It charges my phone. I will contact Sonos.
@ApacheRanch6 күн бұрын
Perhaps see if the wireless charge capability gives you a different behavior?
@user-yl1rz4co5s6 күн бұрын
What type of hydro fluid do you use?
@ApacheRanch6 күн бұрын
@@user-yl1rz4co5s I just use a regular 20W-50
@wcjcnc7 күн бұрын
Hey. I just had a guy bring me a zero turn with Hydro-Gear ZT-3100 transmissions on it. He had removed the oil pumps and put them back on and the left transmission wasn’t working. I watched this video and noticed you said those oil pump covers have to be put on correctly or the pump won’t work right. So I went out there and sure enough the pump cover on the transmission that wasn’t working was on wrong. The round marking was on the wrong side. So I took the bolts out and spun it around and put the bolts back in it AND IT WORKS!!! What doesn’t make sense is, the cover on the other transmission is on wrong too and it works great. The round mark is on the right side not on the left toward the center of the mower. Why does that transmission work even though the pump cover is on wrong?
@ApacheRanch7 күн бұрын
@@wcjcnc I don’t see how it could work. The pressure would not be right. Very interesting! Good luck!
@wcjcnc7 күн бұрын
@@ApacheRanch Well damn. The guy had someone else repair the threads where one of the bolts hold the cover on and he did a sketchy job. It’s holding but even though it works fine I want to turn that aluminum cover around so it’s on correctly but since the transmission works I kind of don’t want to mess with it. Lol. I’m a stickler for having things like they should be. Lol. But that circle that is molded into the aluminum should be on the side toward the center of the mower on both transmissions correct? I’m afraid if I put it on correctly it won’t work and I’ll end up switching it back. I guess if it works I should just leave it the hell alone. Lol
@ApacheRanch7 күн бұрын
@wcjcnc I think I would leave it as is and just tell him that you are not confident it will be a long term solution - but it might - so rather not mess with it while it’s working.
@wcjcnc7 күн бұрын
@@ApacheRanch Agreed. Thanks for the response and the video. I never would’ve thought that cover had to be on a certain way.
@ApacheRanch7 күн бұрын
@@wcjcnc yeah it’s a pretty ingenious pump design really. I wish you the best!
@judysbakeryandtestkitchen16547 күн бұрын
Thank you very much! I use it on my cane so that I don’t lose it. But it’s losing its signal. I saw another video where the guy was huffing and puffing to try to open it. Now I know it’s the glue that’s causing the problem.
@mjk65197 күн бұрын
Thank you!!!
@ples137 күн бұрын
Fog of war? No. Cursing. Laughing. Uncertain of target. Non-stop talking on radio. Unprofessional at best, criminal at worst. "Yet by May 1990, Col. Hayles was quietly being branded something of a renegade for his combat tactics. He recalls an instructor's oral reprimand at Fort Hood, Texas, on the last night of a combat training course on Apache attack strategy. 'He wanted me to the rear, studying maps with a flashlight. I just wouldn't do it.' " There was NOTHING BUT friendly fire out there. Hayles claimed that HE was shot at by friendly fire on February 1 and two Apaches fired on our own scout vehicle on February 15. Gen. Rhame had recently issued an oral guideline _ short of a direct order _ that battalion commanders avoid personally firing on the enemy so they could focus on directing others. "We don't pay generals and battalion commanders to be in direct-fire situations."
@willwarro40548 күн бұрын
chevy equinox headlights are not adjustable.
@ApacheRanch7 күн бұрын
Actually there is an adjustment screw on the top. Works great on a 2015.
@Maxern-gx6js8 күн бұрын
It dose not og out again after i pushet it in
@patricknoland74028 күн бұрын
Q: What is that attachment?
@ApacheRanch8 күн бұрын
It’s a rental. Post pounder.
@patricknoland74028 күн бұрын
@@ApacheRanch I ended up going with a hand-held one, 70-pounds, was a real challenge. This one looks heavier and easier, mounted to the skid steer
@ravenchavez56619 күн бұрын
How did you change the switch??
@OhKee129 күн бұрын
Did you remove the wheel well cover to change number 8?
@ApacheRanch9 күн бұрын
No, it's described in the video. I reached it from underneath.
@OhKee129 күн бұрын
@@ApacheRanchsorry I meant to get your second arm in. I guess I need to find a different angle my wheel well cover doesn’t allow a second arm in. Thanks for the reply
@ApacheRanch8 күн бұрын
@@OhKee12 if I remember I just had my single arm in there. Using that spark plug socket on my ratchet in the way I described so I could get a small turn each time on it.
@OhKee128 күн бұрын
@@ApacheRanch yes sir that 3/4” socket saved my bacon. Thanks for the video and response!
@ApacheRanch8 күн бұрын
Glad it worked out for you! (It’s such a pain!)
@wileycoyote31899 күн бұрын
My airbag light is on seeing as I did a dash swap and the passenger side isn’t hooked up, would this be the cause to it not going into drive and being stuck in park?
@ApacheRanch8 күн бұрын
Even with a busted main fuse and completely inoperable system, my truck would drive just fine. But you would just have the airbag light on all the time. So I think you have a different issue with getting it out of park.
@dixeyfuly9 күн бұрын
Thanks ..
@rextransformation74189 күн бұрын
If Pray & Spray was an Apache gunner, well...
@2kalubafak4049 күн бұрын
Your procedure always works! Except for this morning. The unit was only dribbling about 1/4in. of fluid. I did the procedure and still just a dribble. So I thought I would try descaling with vinegar. Mixed a 50-50 solution of vinegar and water in the reservoir and ran it through about a dozen ten ounce cycles. Gradually the stream got stronger and the volume was slowly approaching ten ounces. After about a dozen cycles, and mid-way though a ten ounce cycle, I turned off the unit and let it sit for 15 minutes. Following letting it soak, the unit flowed ten ounces as programmed. With my first K machine I used city water(river water source) and it developed a brown slime mold inside so ever since then I use distilled/purified water. So I am surprised that I finally had to descale the unit.
@ApacheRanch9 күн бұрын
@@2kalubafak404 thanks for sharing! This is very helpful.
@Stillsodeadly19 күн бұрын
I replaced that same bad fuse. Initially had power. Then the new fuse blew as well as the next. Any thoughts on what to do next. Same microwave.
@ApacheRanch9 күн бұрын
@@Stillsodeadly1 have you checked the door switches? Look for any burn marks near those switches and the wires plugged into them. I have another microwave video on that.
@Stillsodeadly19 күн бұрын
@@ApacheRanchthanks for the quick response. No burning but I’m gonna give it a try. Recreated the problem as soon as I closed the door. Great videos!
@ApacheRanch9 күн бұрын
@@Stillsodeadly1 yeah those switches are notorious for going bad and disabling the entire machine. And they’re a very cheap part. Good luck, I hope it works for you.