I just wanna say i didnt have to pull the whole thing out what so ever. All you gotta do disconnect the 3 screws from the air filter cover and remove the part that is attached it (which is clips) then you can literally take it off without needing to remove the whole thing! 15 minute job max
@anthonymusto873817 күн бұрын
What scan tool did you use to reset the oil light?
@yansun390215 күн бұрын
i want know too
@Kiss__Kiss20 күн бұрын
This is honestly the best oil change video I have seen within the 3rd gen Cayenne, here on KZfaq. While everyone has their preference, in my old age (50+) I love the easy approach. Topside oil changes are the greatest invention since, you guessed it, sliced bread lol. It's what I pretty much do with my B8.5 allroad and B9 Audi S4, which this Cayenne shares an engine with. Thanks for this DIY. PS: Also good to see you went with 5w-30 rather than H2o, or shall I say, 0W-20. Hopefully as time goes on, you'll get to post other DIYs for this Cayenne.
@siyoungchoi750826 күн бұрын
Thanks for the great video. What is the vacuum tube for and is it ok to disconnect it and allow air to go in?
@sorooshb0072 ай бұрын
After how long do you have to change it?
@RF-ww5mp4 ай бұрын
great video
@IqbalContractor6 ай бұрын
Please upload more DIY videos for similar Models so that people don’t have to run to dealers or mechanics. Thanks
@IqbalContractor6 ай бұрын
Thanks for sharing. Make my life easier. Did it by myself.
@BrisMatal7 ай бұрын
Which VAG-COM are you using?
@iokona7 ай бұрын
I have never seen this oil extraction method done in my entire 52 years of life
@russm535il10 ай бұрын
Can I ask where you purchased your oil extraction pump . I bought one at griot’s garage . The tube which going in the tube perhaps is too large a diameter because I can only get barely 4 quarts out after pumping it for almost an hour
@DeRock4014 ай бұрын
Amazon has them for less than 50$
@musclegto10 ай бұрын
People who have done it? Do you really need the trim removal tool to unclip the sensor?
@100stars Жыл бұрын
Mine has only one filter. My car was a 2014 certified CPO purchased back in 2017. It always had only one engine air filter. Is this normal?
@hyperspaceexplorer5594 Жыл бұрын
Hey. Your voice sounds familiar. Are you a voice actor? I just can't remember where I heard it.
@ocebum Жыл бұрын
한국분이신가용ㅋㅋㅋ
@freedomchaser4781 Жыл бұрын
Thank you. this is great! Decided to stop purchasing Audicare after 6 years. Called Audi Bay Area dealer yesterday, they would charge $383 for the oil change alone. By comparison, one-time cost of $100 for the extractor, $45 for oil and filter making the dealer cost look like a HUGE ripoff.
@bushmaster17402 жыл бұрын
10x easier to just take out the airbox screws instead.
@chipchelios2 жыл бұрын
Lol
@UhhhhhnooOOo00oO2 жыл бұрын
What can I do if one of the most well known Mercedes dealerships broke the snorkle plastic clip on my car? Is it absolutely necessary to have a continuing tube to the front? Does the snorkle run to the radiator or is the plastic oval/elliptical shaped end piece nor important to be 100% attached near the front bumper?
@alex932502 жыл бұрын
I have the 2016 and this helped me a ton. Do you still have this car? I don’t drive so I’m just hitting 60k now. Have you changed your spark plugs, brake fluid, radiator fluid or anything else? I love how you explain things and would love videos on those.
@Orlanzepol1232 жыл бұрын
You need to use less water with Castile soap if you want thick foam. I think Castile soap makes the best foam .
@TeeFat2 жыл бұрын
Thanks for the video. I have changed my oil twice now, and have decided to change it after every 6 months but replace the filter annually.
@blinksbill11382 жыл бұрын
Thank you for this. So can I use any epoxy or do I need that specific kit
@botinhas822 жыл бұрын
Hilarious video! The only thing missing is to lubricate the o-ring on the new oil filter before installing it. ;)
@vg98782 жыл бұрын
I don’t understand why you need to remove whole filter if you need unscrew just 3 screws and it’s way easier to replace it instead to have a deal with clamp and sensor.I just did it on the car.
@fb18612 жыл бұрын
Great video. Sidenote: The bolts to the engine need 9Nm tourque.
@michaelkeller59272 жыл бұрын
Thank you so much for this!
@smartin6842 жыл бұрын
Thanks! Love your video because it gets right to the point with no BS or music or any extra junk. No talking about how many cars you have, what your mom made for dinner or how your dad taught your how to fish or some other claptrap. Excellent
@carolynharper83313 жыл бұрын
I did not realize that there are kits! I thought I was going to have to call a professional and pay big bucks! Thanks!
@jameslucas55903 жыл бұрын
ROFL. YOu crack me up. Great Video.
@ryan47933 жыл бұрын
The concord Audi dealer charge me for 199 for oil change in 2019
@joelemslie8163 жыл бұрын
Excellent work Kimchi!! I have a repair I need to make at my house and you are really thinking out of the box here. I haven't seen anyone else using this technique. Very helpful!!
@POOKATKC3 жыл бұрын
What if car won't start?
@judybesse40583 жыл бұрын
That looks terrible I would not accept that
@joelemslie8163 жыл бұрын
His technique is solid. Harvesting the pigment from the same stone is a fantastic move. He misses the mark on the darker area but could have sourced that pigment from a darker part of the stone. He could also work the top layer with some pigments from a kit to better the match. I think you're dismissing the value of his technique...and its his first try.
@crixus8571 Жыл бұрын
Getting the right colour is the hardest bit. I did similar thing but with an old wooden clock. It really takes a lot of time to get it right and patience. The other thing is the place, if this is in a bathroom or kitchen (when you clean the surface often) you can't just cover it with the right colour (what I did with the wood) as it will go off.
@MrSpuzzz3 жыл бұрын
Thanks man you helped a lot
@Cccc-ky4vq3 жыл бұрын
How much should this cost??
@michaeljiang84953 жыл бұрын
Thanks for sharing!
@nero2zero13 жыл бұрын
This is especially useful now in California will all the fires
@pfsantos0074 жыл бұрын
Excellent video.
@gregorysmith38654 жыл бұрын
Can i use cordless screw driver
@leobthelionshow4 жыл бұрын
Do you have any suggestions to get the air intake duct to latch to the grill, im having trouble re-attaching. I thought i broke it, ordered the replacement part only to see its not broken. Any tips would help
@ThatS550guy4 жыл бұрын
Easy to take off now I know I can add and aftermarket K&N intake in that spot thanks I’ll do it tmrw maybe
@claude775734 жыл бұрын
You reconnected the sensor, but you forgot to push down the locking mechanism.
@Livethisnow4 жыл бұрын
just found them:)
@Livethisnow4 жыл бұрын
Hi, could you send me links to tools?
@russm535il4 жыл бұрын
Does the Audi Dealer change it with an extraction pump ? Thanks great video !
@diykimchi28863 жыл бұрын
Yes they do! This takes me less than 10 minutes if not filming start to finish so skip the dealer and do it at home.
@shayan40404 жыл бұрын
so the second filter cant/shouldn't be changed?
@sheckel24 жыл бұрын
My 2014 E350 Cabriolet doesn't have the secondary filter (the gray one in the video). Is this normal for the US market?
@honeykim58774 жыл бұрын
Very helpful video👍
@deewademai4 жыл бұрын
You can just unscrew those 3 screws and lift up the left side box. You don’t need to disconnect the right side.