I want to put this on my 2 stroke motorized bicycle and have awd 😅

Do you know anything about bicycle safety in the rules of the road? The reason I ask is because bicycles have to follow the same rules of the road as cars. But in this video I just saw you run a stop sign. That could get you run over seriously hurt or even killed. I know this is a product review but when you are on the road like that you still need to follow all safety rules. That includes helmet and a safety vest but not following safety rules in these videos will let young people think they can get away whether they are young adults or teenagers.

From what I have heard the actual BMS pcb in these batteries also cause a slight drain. So theoretically even if you disconnect the battery and leave it in the bike you will still have an issue as the BMS will run it down eventually. Which begs the question where is the BMS system in power tools? In the battery or in the tool?

I’m wanting to get one for my cbr600f4 which one do you think I should get for my bike ?

Sweet bike all original 👍🏻👍🏻

hey man could i email u

how big of teeth could u go

Great battery. My daily rider has never started so fast. No charging, no battery tender for 3 months so far.

What was the old battery?

Great job! Can you please explain how to remove / replace the clear rubber band around the tanks perimeter? Thanks.

Sorry man but This isn’t a gun comparison this is a nozzle size comparison. You even acknowledge this in the video. I was really interested to see if the HTMR gun was worth it but this comparison is pointless. Get the same size nozzle for each gun then it will be a worthwhile review.

The window rinse sure does not cover mutch area

Chris, thanks for the review! Glad you like the blast gun.

Formosa Jalapeno Hot Sauce is the play!!

The fact you didn't add more after first application, makes me contemplate the validity of your tastebuds,.. or should I say tasteDUDS

Love the Ireland clock. Also, I like putting franks on a hotdog with Kerry gold

I put that shhh on everything

Can I ask what kind of compressor youre using and how the noise is from the compressor?

Such a great review. Makes me want to buy a NA Miata.

Thanks Chris. The world wouldn’t be the same without authentic reviews like this

I just checked the website. $500 lol.

Is this the 4.0 Kaniwaba kit?

Diff bike it’s like a cold air intake equivelant

bro said multiple times "deez nuts" knowing perfectly what he was saying

id off myself if i had to genuinely pedal like that

Holy sh*t! Working on a boat motor. This is freaking genius! Harbor freight has a palm nailer for $30. Worth every penny.

How much weight do you have on it including the wheel weights

It’s never a valid comparison when you change more than one thing.

What a shvitz! I don't have time to do all that to replace mine

Do you keep the heater in the zinc

U can remove it with a 1/4" impact if you have a 3/8" driver bit and put back on with your 3/8" ratchet.

I just successfully did this. 1/2” thin wall piece of copper pipe about 3.5” long. Get the seal out, then slip the pipe over the shaft down onto the bearing. Beat down on the pipe with small hammer and the bearing will push down and fall out the bottom. Worked like a charm. Bearing will slide down and be loose on the shaft and then you can work the shaft out at an angle through the bottom.

life saver! for sure

Woah, this is ideal! Am I understanding right you can put them on the emotos like Surron, Talaria, eRide Pro etc?

Does these fit any ebike?

Bought for my Yamaha Viking side by side. Lasted less than six months and wouldn’t take a charge. Had bike tested and no electrical problems. Put $110 lawn motor battery and everything is good. Very disappointed in the NoCo battery. Waste of money

My Swytch kit is scheduled to arrive next month so I'm watching a lot of install videos. Biking has been my primary transportation mode since the 90s. I do basic maintenance but I've never changed a tire, thanks for taking the time to show the details. I really liked the surprise ending when Sheila rides out of the gray garage into the beautiful green neighborhood.

How is the top holding up? Any leaking? Have you replaced it again since? That plastic rear-window worries me. Also, where did you buy it?

Worked perfect!! Had to remove a gas pedal pin

This works! Punch with a hammer, I was afraid to break the rod with heavy pounding. Plier and pull, ergh no way.

Dude - you're a life saver! Spent literally weeks trying to get a roll pin out of the shift lever of a 1966 T-Bird. Your method had it out in about 20 seconds!

I have had this a couple of times. I think modern chargers too clever. Simply put on old fashioned charger for a few minutes, or jump with another battery. Then swop back to a lithium charger. I wouldn’t leave them long/or unsupervised though!

For the first step (3:15 mark), what current level was set for the preparing the plating solution? I used a quarter amp just as a starting point, but might that be too low? Thanks!

Going to try this method out. I like KISS! 60 year old hardware from a well weathered Sunbeam Tiger front suspension. I used Klean-Strip (phosphoric acid based) to remove the last bits of rust after wire brushing as you showed. Otherwise my setup is now the same as in the video. I'll drop a comment on the results in a day or so.

little clock would draw uA of power, not the issue. the battery will have a BMS circuit trying to keep the batteries in balance, that takes a small amount of power. over time it will drain the battery. there are smart BMS circuits with auto cutoff at 2.5V/cell to protect the battery but maybe not this one. best to charge the battery to 80% every month while in storage/not in use.

Or.... Just unhook the battery 😅

BTW - How does it function UP-HILLS? Where we live, we have lots of them, especiallysteep ones. Reply back is appreciated. Great review! 🤓👍 - TY.

LiPo batteries in that condition require a special "conditioning" charger. I had something similar happen with an electric motorcycle I had. Standard chargers won't work.

do you think this kit would work on a Sur ron Ultra Bee

A year later and here i am at this same problem with the clutch cover. I am going to take heat to it tomorrow and try and tap it out. If all else fails the dremmel will prevail