Petrokey en

Пікірлер

@ludofevrier5593 3 күн бұрын

🙈🤣👌🏼

@mark6302 3 күн бұрын

I love tiny whoop idkfa

@petrokey_en 3 күн бұрын

Yeah! idkfa should let me break through the closed dor with my drone)))

@aceofcase8295 4 күн бұрын

Cool)

@adakalyoncu1913 13 күн бұрын

Have you experienced any performance loss or any electronics wearing out over time? I am in look for a lil micro that I can trust will last me long and keep me able to fly a real quad whenever I want for as long as possible. I've been flying emax tinyhawk 2 freestyle for about a year which had no crashes or whatsoever till it started giving failsafes all of a sudden. Then I realised that my rssi goes way below what it used to do. I will try to fix it by buying an ExpressLRS reciever but in case I mess it up somehow, I wanna have another quad that i can fly with before I do anything. Tinyhawk flies good other than having it's range reduced for whatever reason. Thats why I am looking for a micro that I can trust will last me for long without something wearing out just by being used

@petrokey_en 12 күн бұрын

Well, Cetus has few week itrms that may fail with time. - the motors wires are connected with connector but not soldered. The connection gets oxigen cover with the time and connectors overheats and motors start work not so good. But it is possible to replace connectors or simpli solder the wires And camera sandwich overheat. Well, configs like minimal power till first arm helps. And may install radiator. However I would look at new pavo or at least meteor series that have better ventilation (however still have simple motir wires connectors)

@adakalyoncu1913 12 күн бұрын

Oh okay, I have a bunch of those laying around from toy quad vtxes anyway and I'll probably use pit mode or something and will probably run my vtx at 200 mw unless i really go do some range. Does the female connectors for motors on the quad oxidise too or is it only the motor connected bits?

@petrokey_en 12 күн бұрын

@adakalyoncu1913 well, both sides of contact oxides, but from my practice change of connector at the motor wire usually helps. As for power if fly at home the or outside within 50m range - 25mw should be enough

@mssippijim Ай бұрын

The other connection on the camera/vtx is probably the OSD info being sent to the vtx. Yellow wire?

@petrokey_en 12 күн бұрын

Yes, as I understood the osd is applied at vtx, so the 3th wire sends vtx controll info (like power and frequency) and osd data

@erickhuntergames 2 ай бұрын

Hello, I just bought the cetus x kit and I have the same problem with the literadio 3, do you know of any solution? My computer is also AMD, do you know if there is any current solution with just drivers? It also doesn't let me use betafpv configuration

@petrokey_en Ай бұрын

That's a problem. I do not know a driver fix. Only - update firmware of rc to stable one (same as with aquila kit). But I do not have direct link to literadio3 stable sw - needs ask at betafpv support team. And the cetus x should be also downgraded to sw betaflight 4.3.1 (as it uses elrs2 compatible with stable rc sw)

@douglasyoung3992 2 ай бұрын

The lava 550 is still a bit elusive in the states. I guess they're trying to dump all their old obsolete stock first.

@petrokey_en 2 ай бұрын

Yeah.. I'm not surprised...

@Juacalvo 2 ай бұрын

easy to mount???

@petrokey_en 12 күн бұрын

Yes. It has connector so no soldering

@prohackerahmedzagabra5874 2 ай бұрын

Hello could you help me with my issue my aquilla 16 after a crash it pairs to the headset but does not display it's just a black screen

@petrokey_en 2 ай бұрын

So auto search channel does not work? (Aquila might change channel by D switch toggle) If not - can you try disassemble and check if wire still connected to vtx, and if antenna (a small piece of wire) not broken?

@prohackerahmedzagabra5874 2 ай бұрын

@@petrokey_en no it connects to the drone the goggles connect to the drone and also i checked the antena its still connected also the fpv module is blinking blue light like not the drone only the camera part but the goggles just show a black screen with numbers above it like the signal that its on do you know i could contact beta fpv if it ends up not working do you think i could buy the co4 with vtx think and attach it to the drone or what should i do

@petrokey_en 2 ай бұрын

@prohackerahmedzagabra5874 the numbers you are speaking about - is it a drine info like battary value or mode? If you have these OSD then the vtx itself is ok, but problem with camera. I am not sure about c04. I know that betaflight version (with 5 wires) will not work because of different proptiatory digital protocol used. But about c04 Cetus - needs clarify with Betafpv support

@prohackerahmedzagabra5874 2 ай бұрын

@@petrokey_en its not the osd its something else do you know how i could contact beta fpv support the thing that shows in the screen is the signal that its connected to

@petrokey_en 2 ай бұрын

I've sent this question to betafpv. Waiting for responce (they have holidays). Anyway mail or 'ticket' form is available here support.betafpv.com/hc/en-us/articles/900004682543-Contact-US#:~:text=Please%20don't%20hesitate%20to,Email%3A%20support%40betafpv.com

@petrokey_en 2 ай бұрын

bit.ly/3UtC09R

@blanktntman480 2 ай бұрын

I have one but mine won’t fly any more 😭i connected it to the pc to see the beta flight but after I was done the drone won’t fly the same no more like it just stays in the ground and it won’t go back up it dose connect to control and goggles but won’t fly up again and there is no video showing how to update the flight controller??? Pls help

@petrokey_en 2 ай бұрын

Aquila does not work with betaflight sw. You will need 'betafpv configurator' sw (it looks similar but it is another one

@blanktntman480 2 ай бұрын

@@petrokey_en bettt bro thxs a lot

@jacopopellarin3934 3 ай бұрын

Very good video, i own a cetus x, i could buy only the drone? The remote controller 3 will work with aquila?

@petrokey_en 2 ай бұрын

Yes. If you've bought cetus x long time ago then most likely you have elrs2. Then will need downgrade elrs version of aquila to 2 (see next video)

@BergeronFPV 3 ай бұрын

Hey I rarely ever drop comments, But I loved this video! Keep doing these reviews you go about them so differently , I love that you crash test and then tear it apart. No one else does this

@petrokey_en 3 ай бұрын

Thanks!!

@BloodCatters 3 ай бұрын

That was very informative thank you! I want to get into FPV and I have been researching for a week now. The amount of information is crazy. I think I will start with such a kit and if I decide to move forward I want to be able to use the lenses and remote control from this drone which I understand is possible if I get a drone with the same communication protocols. I also liked that you have modified your Cetus-X, how hard it is to add an additional higher quality camera to record images. Because I would like to do something like this.

@petrokey_en 3 ай бұрын

Thanks! Adding runcam thumb is not too hard, but I am not sure if Aquila is powerful enough to carry one. For Cetus it was difficult in some cases and Aquila is definitely less powerful

@user-mw8vs3pu6i 3 ай бұрын

my wifi cannot detected, why?

@petrokey_en 3 ай бұрын

The wifi antenna at drone is week, so needs move closer to PC. Or even turn off home wifi router And the remote should be turned off (itherwares drine will connect to rc and do not swich to wifi mode)

@jonsproductionstudio 3 ай бұрын

I wrote to BetaFPV support about the problem with the BetaFPV literadio3. They said that I should flash the radio firmware to 1.0.2. I tried it and it works.

@therion961 4 ай бұрын

Show us how it flies bro.

@petrokey_en 4 ай бұрын

There are few seconds of it's flight in previous video - review if battaries

@mnm-oy7bw 4 ай бұрын

I want to buy the nano tx for my literadio 3 but i would realy like to know if it actualy works so that i don't wast my money

@petrokey_en 4 ай бұрын

At the moment nano v2 does not work with my literadio3 (elrs2). Needs ask betafpv support if they have any sw that supports it...

@oisinogorman35 4 ай бұрын

good video

@petrokey_en 4 ай бұрын

Thanks!

@user-ey2sw8wx7e 4 ай бұрын

Places different by length (can be seen visually) batteries one next to another and says "The sizes are absolutly the same". 😂

@petrokey_en 4 ай бұрын

Well, yeah .. but thay can be installed at the same cetus or meteor slot

@aceofcase8295 4 ай бұрын

Thanks!

@petrokey_en 5 ай бұрын

bit.ly/3SRhnoe

@croptv7093 5 ай бұрын

текст писал или все на ходу ?

@petrokey_en 5 ай бұрын

Переводил находу с украинского ролика) а украинский переозвучивал попамяти и по наитию)

@Bababandawe 5 ай бұрын

Is it compatible with BetaFPV lite radio 3 ?? You didn’t test after put the bind phrase

@petrokey_en 5 ай бұрын

I have failed with literadio3(. It just does not save 'external on' and when I connect to configurator again - I simply see both internal or external disabled. As a result my drone is paired with tx itself (no metter by button or bindphrase), but tx sends 0 value for all sticks... Maybe it is because I have an old SW at my lr3 but I have not tested with new one ..

@ArtemXify 27 күн бұрын

@@petrokey_en I updated my LR3 to the newest fw, and it does not even allow switching to external modules anymore :( According to BetaFPV support, we have to downgrade the LR3 fw to 1.0.2. It kinda works, but then the internal module won't pair with the drone. Is there any way to upgrade elrs on LR3 separately from fw?

@petrokey_en 12 күн бұрын

Unfortunately no. So waiting for bugfix in later sw versions...

@sashagritsman 5 ай бұрын

Well done! Russian, Ukrainian and now is English! Peremogi!❤️

@aceofcase8295 5 ай бұрын

What is better - nano or superG?

@petrokey_en 5 ай бұрын

As for me thew work almost similar. Well if you do not plan fly in noisy environment then nano v2 would be the case

@aceofcase8295 5 ай бұрын

Thanks!

Ең жақсы KZfaq

Пікірлер