What is your final OD ratio? Are you happy w/that % or do you wish it was a little higher or lower?

Cool vid, thanks.

Do you like the Reaper or Poizd T3 better and why? Thanks!

Nice to see a video with a truck just put together and ran, Makes me feel normal it's how I show up to comps haha.

That truck is awesome

It's been HOT here in Georgia so I haven't been RCing much foe a few months. Not the heat itself but the humidity is the worst man.

Okay, looks like you found out what the problem was. Glad it was nothing major. Did not sound good, but still a good rig on a bad day.

Love this rig very nice video to watch 🤘✌️

Pretty sure your gearing is to high for that revolver man. I was having the same issue and dropped a couple teeth on the pinion and no more jitter,butter smooth motor now.

How are you getting all the flex on your front end?... Rigs looking good, only thing I've done with mine is swapped the beadlocks from my Fusion and added some weight to all 4 corners...

Yooo you guys helped me solve the problem already….honestly it’s kinda embarrassing. But it was a screw hiding underneath that holds the transfer mount! 🤦🏻‍♂️ thanks for all your super helpful comments. This is why I LOVE the Hobby drop community! Thanks yall! 🙏🏼🙏🏼

Could be the slipper clutch spring...had a similar noise.

At 2.17 I can see that the motor screw closest to chassis rail is cross threaded/loose, not seated flat. The bright silver rub mark on motor looks to be in perfect line with drive shaft grub screw... Having said all that though, it could be the motor which acts like a speaker.. its actually what gives you the beeps when you turn on your esc and lipo cell count beeps etc..(if you weren't aware its not the esc beeping) Forgive me if you knew this already. It does seem to appear to coincide with when its all being a little jerky at initial start up.. maybe programming or that loose screw allows the motor to vibtrate emitting that sound. I can also see the slipper disc and spur gear hex are out of alignment so it maybe slipping as revolvers are torque dense. You could remove friction material and line slipper disc up with the hex in spur gear to create a easy slipper eliminator. It's definitely not as smooth as it should be and pretty confident its electrical noise. Good luck, you will nut it out.. Cheers

Pinion mesh maybe? If not see if driveshafts are rubbing something

Bruh...that sound! I also thought that motor and driveshaft were making contact, but I noticed it making it when driving straight, flat, forward and reverse. If you haven't figured it out yet, I'd suggest propping up the truck where you can run it and twist it by hand so you can pinpoint where it's from and what it's doing. Also, check your CV joints at the knuckle, the pins are notorious for breaking. My son broke one and we only noticed while cleaning the truck, Redcat replaced it asap and free, of course.

Love the rear and rear 3/4 angle filming, where possible of course 🦾

The noise is,definitely the drive shaft hitting the motor. I ended up with the silver stripe from a pebble that got on the skid under the motor. But I have to say the Holmes revolver is my favorite motor out there.

grass or something in spur gear

The silver stripe is not on his motors originally so I'm sure it's something hitting your motor.. may want to look into it more

You need to use a silent esc with that motor or you get that noise

Keep grinding. I enjoy the content and style

Looks like your motor is grinding on your driveshaft. I watched the whole thing. I love your rocks and rigs! The vids are long, but enjoyable. Folks these days have short attention spans.

Awesome location and the Coyote is performing well.👍🏾🔥

Full views all videos conment most videos great content love the Red Rocks and the trails I have been on the last part but going up. Pinion spur mesh, maybe . I'm getting ready for Pro-Line by the fire, but my Capra not running right now snapped the axle housing, but I haven't fixed it yet. Liking the desert rc coyote chassis. And I'm still working on the Rock Pirates build. Stay safe, my friend

That front driveshaft looked like it might be getting into the motor

I tend to go with cheaper wheels if they look good in the right offset. Im happy spending a lot more on expensive wheels if theyre matched to fit non rotational wheel weights such as dlux loaded dice or hardpark rc. Because this is the best possible way to add weight. Also I prefer light wheels, carbon or alumium over brass for sure

Why turn the shocks upside down??? That don’t make sense if you know how shocks work.

Those tires came on the gen 7 sport too. And they are awful, I didn't run them long at all. My favorite tire ive tried is the megalithic. They will even grab the river rock up here in maine.

The problem with the tires is the tread depth. They are far too deep they work ok once they are shaved way down but never great.

Took my H10 out for the first time today…did okay but not stellar as a crawler. I did add the Fusion Pro and ran stock servo. The electronics were/are not great in my opinion but they do work lol. I’m currently adding 2.2 LP Hyrax tires and I will add brass up front in the near future. I bought this rig knowing that it wouldn’t slay insane lines but it would look awesome trying 😂. It’s a beautiful looking machine and I’m happy to have one in my fleet. Cheers!

I just got some 2.2 x 5.25 Tusks for my optic with Exo’s inserts…….works great..

Hahahaha i feel your frustrations here. Drag axle in tough cracks having to completely reset everytime then having phone issues and camera issues. Driving my class 2 definitely has a time and place hahaha. I had a day like this a few days ago. The trail is allll tough steep cracks with low traction but many times when you spin too much, the rear falls in and you have to completely reset. It was sooooo frustrating because it can all be done first try some days and then others i can only maybe get 10 percent of them. Its wild haha but part of the game

Great job the video was nice to watch 🤘✌️

I like your channel. It's a WDW like : no awful music, tech comments instead, nice views close to the rig, struggling on the rocks and nice landscapes.👍 I must subscribe.😊 How do you hold the cam, while driving ? Any accessory to hang it to the transmiter ? Which kind of cam ? GoPro or smartphone ?

So I took some of the 2.2 version off the wendigo and cut all the lugs off then flipped them inside out and they work really well on river rock. And they have ribbing on the inside that makes a weird tread pattern.

Hey mate, do you have the file for the 3d printed magnet body mount? Cheers for the great vid inspired me to do my own

Pretty sure Logan does 4 tread inserts

What did u do to ur optic bro?

Those are made by RC4WD and are terrible.

Is this car class 2?

I do 1/24 scale crawling and 1/10 rock bouncing but I really think my next truck will be a Capra great video and commentary thanks🤘✌️

I really enjoyed watching this video what a great spot I live in Massachusetts and we don’t have this kind of crawling I’m glad I found you I’m subscribing 🤘✌️

Haven't gotten out in a bit it's been 112° plus here. Dig the trail and the reaper. And as you know, I love the Red Rocks of St George. Maybe the next time we're out there in February, we can crawl. Stay safe, my friend, and cool.

I ordered one here in Australia it costs $880 in the RTR AS YOU HAVE THERE

I'm in the northeast and been crawling a few times weekly. Just waiting for new axle shafts for my more capable rig. Also about to build a new custom 4 wheel steer rig based on a wraith metal aftermarket chassis. Because why not go big or go home.

Bro not even I feel like predator is the way to go around our climate

Cool trail! Temps in the high 90s-100+ and still getting out regularly for 3+ hour crawls. We have trees for partial shade,and blocking the slight breezes, but lately have had high humidity. Aclimation, early mornings, and a camelback help.

I am a fan of the revolvers have them in 6 of my rigs, didn't care for the fusion have one out of 20+ cars.

Cool video, got the wife a 2 pc body Acent and myself a Fusion a couple of weeks ago and have been trying to figure out why I hadn't got into this something like this before instead of changing up my trail trucks to crawl... I've been having a blast watching these two walking over what would stop my other trucks and shrugs it off like it's nothing ...1st time here I'll be back to see what else you got... good footage...

Thanks for this, helped me change mine! I ended up taking out the 3 bottom screws to loosen the gearbox, which you can then just lift it out.