I don't get it.. Angle Grinders can cut concrete, metal, tiles.. but can't cut wood? Why does everyone warn against cutting wood if it can cut concrete? Genuinely asking.
@TheBlokeCave11 сағат бұрын
It can cut wood, but it is just very dangerous. And there are so many tools out there for cutting wood that the question becomes why risk it with an angle grinder? With a circular saw, jigsaw etc they have a base that the saw blade is always pulling the wood into, so if it binds it just gets pulled towards the tool and the solid metal base. If your cutting with an angle grinder and it binds then that piece of wood is just getting flung right back at you
@ElvinChuaMeister20 сағат бұрын
Thank you for the video. Short and clear. Hammered looks way cooler.
@cezmitabay278120 сағат бұрын
Perceft
@lilianvandervecht3578Күн бұрын
Thanks! 🙏🏼
@briansokoloski776Күн бұрын
Not Mentioning How Batteries Become Defective over Time Definitely Important Information
@TheBlokeCave11 сағат бұрын
We try to keep our videos short and sweet and just address the topic covered in the title rather than branching out. If you would find it useful i could do a seperate video on tool battery life and what to do to protect your batteries?
@dred05m612 күн бұрын
04:19 The use of an electric drill to secure the bolt of the euro cylinder is not recommended ❎ It will break the thread or cylinder in the worst case 🔏
@TheBlokeCaveКүн бұрын
Very true always best to use a handscrew driver! It could strip the screw head as well. Could be worse, at least I didnt get my impact driver out 😅
@debjitmondal46422 күн бұрын
Bro your screw set buy link share here
@TheBlokeCave2 күн бұрын
Cant find the exact set anymore as ive had this one for years, but its just like on of these amzn.to/46gqzrq (affiliate link)
@singhaxes78103 күн бұрын
I could’ve sworn I tried doing exactly this with no luck, but I followed step by step and it just worked. I almost ignored this video thinking it was just the basic tutorial for changing bite even though the title says otherwise. Maybe it was the tap, but I find it hard to believe such a light tap could release what felt like such a tight grip. Thanks a bunch for the video
@TheBlokeCave2 күн бұрын
No problem :)
@sinkingslowlywithasmile3 күн бұрын
thank you
@cindytrimblr3 күн бұрын
Mine is not turning, it just keeps clicking. My 18v isnt charged and I need a longer bit😑 idk why it isnt loosening
@TrentG234 күн бұрын
Haha thank you! I didn’t press it in hard enough.
@TheBlokeCave2 күн бұрын
Glad I could help!
@vitbing4 күн бұрын
do you add water from a garden hose to the area your cutting to keep the dust down and extend the blades life ?
@TheBlokeCaveКүн бұрын
I have never felt the need to when using a small grinder. I have had the same diamond blade for 10 years. It probably would be better to use water but It will make it harder to see your cut line when the dust turns to sludge.
@Scimmia-Locale-wr9cx4 күн бұрын
Can I use it on my contact lenses?
@TheBlokeCave2 күн бұрын
I have no idea! I don't imagine it is a safe paint at all so would definitely advise against
@jeremywatts27684 күн бұрын
Whats it mean when it charges to about 90% and then pops? My charger died on the first use and it got so hot, I thought it was going to catch fire.
@TheBlokeCave2 күн бұрын
Not sure but it definitely sounds like an issue with your charger
@jeremywatts2768Күн бұрын
@@TheBlokeCave Prolly. They're sending me a new everything. The 15ga that arrived didnt have the issue, but I see how this charger is confusing.
@angie10454 күн бұрын
Covered everything I needed, thank you!!
@TheBlokeCave2 күн бұрын
You're welcome!
@shansi19314 күн бұрын
Not safe to use hand. Use cloth and grip pliers to hold the chuck
@soniaforde38475 күн бұрын
After watching your video I just unscrewed my first picture shelf. Thank you so much don't need to call my neighbour.
@TheBlokeCave2 күн бұрын
Great job!
@arandomname425 күн бұрын
Worked great and saved an expensive trip. Thanks!
@TheBlokeCave2 күн бұрын
You're welcome!
@charitybelle70925 күн бұрын
Thank you
@TheBlokeCave5 күн бұрын
You're welcome
@peterhollamby51486 күн бұрын
Thanks for the advice
@TheBlokeCave5 күн бұрын
No problem!
@angeladavis22066 күн бұрын
Thank you for this. I just bought a Riobi 800w corded. I have no clue what I'm doing 😅 Wish me luck
@TheBlokeCave5 күн бұрын
You got this! Any other DIY areas you would like tips on? I am always looking to make more videos
@nainy46 күн бұрын
Very nice . Black and dekker should hire you
@TheBlokeCave5 күн бұрын
Thanks :D
@aaronhorm9946 күн бұрын
Seeing rebranded dewalt tools with rebranded craftsman batteries is funny lol
@TheBlokeCave5 күн бұрын
Same company so guess it all sort of makes sense, but why they didn't just call them craftsman in europe instead of Fatmax i will never know
@trishakick50356 күн бұрын
Thank you so much for making this video!! Seems like common sense now but it just wasn’t intuitive to me, I appreciate this.
@TheBlokeCave5 күн бұрын
Glad it was helpful!
@booshninja4316 күн бұрын
OMG BRO THANK YOU! THIS ACTUALLY WORKED! I was really fkd'd for a sec
@TheBlokeCave5 күн бұрын
No worries man!
@bbennin96 күн бұрын
It worked! Thank you!!
@TheBlokeCave5 күн бұрын
You're welcome!
@robjac87727 күн бұрын
my charger flashes red and green when i don't connect the battery.. i took apart the charger but couldn't see any defects or burnt parts (M12-18C)
@Iris-jw3ci7 күн бұрын
but then what about on electronics screws?
@TheBlokeCaveКүн бұрын
Good thought I forgot about those, I'll have to do a more comprehensive video showing all the different types.
@Lewinium7 күн бұрын
That makes so much sense now
@raydavison29728 күн бұрын
What about width measurement if it's not an opener? Is there any shortcut other than removing the glass completely?
@TheBlokeCaveКүн бұрын
You could try a different window with an opener if they were fitted at the same time.
@shazj18428 күн бұрын
In case no one ever tells you this, you're a star. Black & Decker wanted £30 to repair. Worked immediately.
@Alucard_FahrenheitTepes8 күн бұрын
If you set in drill mode for all the power of the torque drill, then the numbers are just basically for wood only?
@jinpark43068 күн бұрын
Jesus... just learned about drill mode... was wondering why it wouldn't drill into a stud...
@saiapaea848 күн бұрын
I HATE the milwaukee lock it only locks one way and it tightens more!!
@TheBlokeCaveКүн бұрын
Even taking the batteries out of a milwaukee tool narks me!
@surkh8 күн бұрын
I feel like you explained the difference without _explaining_ the difference 😅
@TheBlokeCaveКүн бұрын
thats no mean feat 😅
@sharp71718 күн бұрын
But why is this
@TheBlokeCaveКүн бұрын
Pozi bits have the extra little star shape to increase the surface area that locks into the screw. This increases the friction between the screw head and the driver bit so it has less chance of slipping in the screw head. However I have never noticed a difference in performance between pozi or philips
@Oceansstardelight9 күн бұрын
Pffh thank you so much, i got panickes for a bit there❤
@elizabethgrace37489 күн бұрын
thanks
@yoyo_zzz10 күн бұрын
works! thank god thank god!
@xstone655910 күн бұрын
Thank you again!!!
@xstone655910 күн бұрын
Thank you SO very much!!!
@Frietbakkerclan110 күн бұрын
How would i use a SDS drill bit in a regular drill?
@TheBlokeCaveКүн бұрын
thats a great question, I'll get on with it!
@sollonggos10 күн бұрын
Good.thank you
@savingsoul10 күн бұрын
Thanks
@TheBlokeCave10 күн бұрын
Your Welcome
@BrynLive10 күн бұрын
this 💯 helped. thank u for the instructions. followed step by step and 1 try and that was it. 😅
@TheBlokeCave10 күн бұрын
We try and keep it simple and straight forward at the bloke cave
@jjay629811 күн бұрын
Does it have a led light? Says it in the description but cant seem to see it
@shotparrot11 күн бұрын
Thanks for the tips! I never realized why you shouldn’t use wood screws. And good reminder to remove screws that miss timber.
@TheBlokeCave10 күн бұрын
Hey, thanks for the feedback, Nobody tells you these things.
@duckmangooo737611 күн бұрын
My instructional lesson was at at my dad's workbench (while he was at work), my brother and i fully disassembled, cleaned, turned blade,assembled. We each did several times.
@TheBlokeCave10 күн бұрын
Every child should know how to do this, its an important life skill, I'd say!
@FixIt_Services-td9qi11 күн бұрын
Looks strange and heavy
@TheBlokeCave10 күн бұрын
It does, I wouldnt use this day to day. But it would be a great option to have in the workshop just in case.