Hey Septimus. Great question. According Suzuki, the ECM, BCM and main wiring harness were all changed in 2022. To use Fish Hunter Drive you need these compatible items onboard. Since these items didn’t exist before 2022, Suzuki motors made prior to this time cannot be used with the Fish Hunter Drive.
@diwannirmal65629 күн бұрын
Hello sir, very useful videos, thankyou very much I'm in India tamilnadu, I want to new model GPS map please help me and support me please help me sir thankyou, please give me some idiya s, please reply
@awsdws77272 ай бұрын
Can you extend the display to another monitor. E.g the rear of the boat to display a mirror of the image? For purposes of jigging without the cost of a new unit
@FurunoMarineElectronicsАй бұрын
Thanks for watching! The TZT12F, 16F, and 19F all have an HDMI output port which would allow you to connect another monitor and mirror the display.
@420_FISHING2 ай бұрын
Side scan?
@FurunoMarineElectronics2 ай бұрын
The TZT22X and TZT24X can both display Side-Scan either from the DFF3D, or if you have a TZT10X, TZT13X, or TZT16X in the network with a CHIRP Side-Scan transducer connected to that unit. Thanks for watching!
@NeaDelossantos-fd3gb2 ай бұрын
Connection installation
@Christian-vx9jp2 ай бұрын
Hi there.. how to set the echo sounder alarm in it sir? Thank you
@FurunoMarineElectronics2 ай бұрын
Thanks for watching. The best thing to do is go to our Furuno Forum page, set up a free account and ask your question there. One of our technical support staff or dealers will be able to answer your question. Here's a link to the forum: furunousaforum.com/
@stefangarmey76992 ай бұрын
Does this option work for SCX-20?
@FurunoMarineElectronics2 ай бұрын
Thanks for watching! The SCX-20 is a Satellite Compass, not a Radar. You need an NXT Radar for this feature.
@sjinvestors2503 ай бұрын
Can I test it on the ground if it’s not installed on my boat at the moment
@FurunoMarineElectronics3 ай бұрын
Best thing to do is check with your local Furuno dealer to see if they have one to show you, or have any customers that would be willing to let you see it on their boat. If you have technical questions on the NXT Radar, check out the Furuno Forum, where you can get answers to your questions from Furuno dealers and technicians. Here's a link: furunousaforum.com/
@sjinvestors2503 ай бұрын
How can I test a furuno next radar. I am new to this
@bobnewman18103 ай бұрын
Newbies Googling for this are probably using the term "bottom contour recording" or something similar, and they will find it for your competitors. But not Furuno because you prefer PBG; bathmetric generation, which is a fine professional term, but one that may cause shoppers to overlook your offering.
@gemelmarinegroup3 ай бұрын
👏👏👏
@Nehpets1701G4 ай бұрын
So it's like the TCAS system in aviation with the colour coding. Very clever. Just a couple of questions.. Does this have a colour blind mode? So for those who are red / green colour blind like myself, another specified colour could be used in place of red? And also would you consider incorporating audible collision avoidance instructions if a collision was considered to be imminent? Such as "Turn hard starboard" to try and give the person in command a simple way of avoiding a collision? Keep up the great work!
@FurunoMarineElectronics4 ай бұрын
Thanks for watching! This feature does not have a color blind mode, but that is a great suggestion. You can change the color of the targets when you are in regular Radar mode, which will help you see the targets. With TZtouchXL, there is a new feature called AI Avoidance, which has both an audio and visual alarm that warns you of a collision and even offers you a recommend course to navigate around the obstacle. Hope that answers your question. BTW, the new FCV600 & FCV800 Fish Finder do have a mode specifically made for people who are color blind, so the idea is definitely on our developers mind!
@SydneyBuilder4 ай бұрын
wow, what a great salesman
@Slonge924 ай бұрын
Just watched a video of Furuno, posted by ‘NautiGuys,’ that was very impressive. Seeing who, and what, is behind the equipment makes for an informed decision process when purchasing electronics. Again, to Furuno in WA state, huge respect for a customer centric team.
@FurunoMarineElectronics4 ай бұрын
Thanks for watching and for your kind comments.
@-37driver4 ай бұрын
What size is that radar antenna?
@FurunoMarineElectronics4 ай бұрын
That is a DRS12ANXT/4 - a 4 foot open array.
@-37driver4 ай бұрын
@@FurunoMarineElectronics Thanks. I've considering the 3.5 vs 4 ft. on a similar size boat. Glad to see the 4 ft looks to be in proportion.
@arnoldreyes78034 ай бұрын
Good evening, Sir. I have a question, if you may. We have tztouch, but all the CMAP chart files are on the card but not read on the monitor. What should we do to read the CMAP chart?
@FurunoMarineElectronics4 ай бұрын
Hello Arnold and thanks for watching. Unfortunately we do not have technicians that monitor our KZfaq channel. The best thing to do is go to the Furuno Forum at furunousaforum.com/, create a free account and ask your question in the TZtouch section. There a either a Furuno technician or dealer will be able to answer this question for you. I hope this helps!
@arnoldreyes78034 ай бұрын
thankyou sir
@mubeensakharkar43695 ай бұрын
👍👍👍
@michaelkondratiew78215 ай бұрын
Will this new unit have Furuno Wi-Fi radar overlay and sea surface temperature capability. Thank you mick
@matdiaries99525 ай бұрын
tzt9f vs mfd 12 .which is best
@Skymajic5 ай бұрын
Great to see that Furuno is still leading the way!
@furunoturkiye5 ай бұрын
Finally! 💪💙
@johnrowland86075 ай бұрын
When are these going to be available?
@FurunoMarineElectronics5 ай бұрын
Hi John! Our dealers are taking orders now for the 22” and 24” units, with deliveries starting in the next few weeks. We will start taking orders for the 10”, 13”, and 16” in the next several weeks, with deliveries expected this spring. For availability updates, please check with your local dealer, as we will keep them updated as products become available.
@j0902815 ай бұрын
Hope I can afford a new suite on the refit
@wattocraig6 ай бұрын
Hi Guys, great video. Does the depth record your current tides and adjust for the tide change? I live in an area with 12m of tide movement, if i record at 2m tide, will it show Xm on a Y tide?
@FurunoMarineElectronics6 ай бұрын
@wattocraig Thanks for watching! Yes, it does adjust for the tide change.
@donsolomon85016 ай бұрын
what a pity there is not 2 ports for transducers, 1 for the traditional transducer and 1 for the side scan. with an option to select between the 2. I only have space for 1 machine so id have to un plug and change transducers manually at sea. Not ideal.
@FurunoMarineElectronics6 ай бұрын
Hello @donsolomon8501, thanks for watching! The side-scan feature not originally planned in the development of TZtouch3 and was a free software added feature that came a year after the TZT3 came out, which is why it only has one transducer connector. Not ideal as you stated, but definitely a fantastic free upgrade to an existing system.
@donsolomon85016 ай бұрын
@@FurunoMarineElectronics yeh 100%. Cool
@guermeisterdoodlebug79806 ай бұрын
Thank you, thank you! I need to replace my MFD12 due to display pixel problems and was already looking at the backside scratching my head.
@FurunoMarineElectronics6 ай бұрын
Thanks for watching, glad you enjoyed the episode!
@ubeshnarayanan2176 ай бұрын
IN manual off mode i getting alarm and there is need to reset it. how to rectify this
@FurunoMarineElectronics6 ай бұрын
Hello, unfortunately we do not have technicians that monitor our KZfaq page. The best thing for you to do is to contact your nearest Furuno distributor and they will be able to help you. You can locate your a Furuno distributor by clicking here: www.furuno.com/en/support/distributors/marine/
@homeycheese17 ай бұрын
Is simrad coming out with a dff3d sonar?
@3anibal47 ай бұрын
Hello Sirs ! It´s possible to change units? I want to write the deeps in meters
@FurunoMarineElectronics7 ай бұрын
Thank you for watching! Yes, you can set the unit up to read meters.
@iwanselebor7 ай бұрын
How to radar performance test with tis radar
@helmuthkrohne49287 ай бұрын
Hi I cannot get range on my sonar foruno ch 600 85/215khz..I only get 300m can you assist me please maybe the settings
@FurunoMarineElectronics7 ай бұрын
Hello and thanks for watching. Unfortunately we do not have techs monitoring our social media, but you can ask your question on our Furuno Forum to see if you can get your answers there. Here is a link to the forum: furunoforum.com/
@rafeek11107 ай бұрын
i have got mercury V12 600hp quad engine setup with electric steering system with a skyhook joystick but wondering why i cant use the autopilot feature on the TZTL16F. any recommendations
@timmoore10207 ай бұрын
Rafeek- Great question and great setup you have. This could conceivably work the same way on any outboard just as it does with Suzuki, but unfortunately Mercury chose to partner specifically with Simrad autopilots. The main functionality behind the operation of Fish Hunter Drive is the communication between the Furuno NavPilot 300 autopilot and the Suzuki outboard motors. Since Fish Hunter Drive requires a Furuno NavPilot 300 autopilot to function, there is no way we can make it work with Mercury outboards because Mercury has chosen to lock down control of their outboards to work with only Simrad autopilots.
@rafeek11107 ай бұрын
@@timmoore1020 thats very good piece of knowledge. I had a look into all the manuals of Furuno and Mercury but didnt find any info regarding intergration. We have got a vessel view 9inch screen which is basically a simrad go9 works well with mercury autopilot. In the Furuno screen the RPM and all parameters appear except autopilot feature
@emafrancisco18088 ай бұрын
What kind of antenna does this radio uses?
@rpmgaspar8 ай бұрын
What model is the 1Kw transducer in the center of the table? Does it work on the TZT16F (Tz3)?
@FurunoMarineElectronics8 ай бұрын
The transducer in the middle of the table is the 165T-50/200-SS260 Combination transducer, which will drive your TZT16F's built-in 50/200kW Fish Finder as well as the DFF3D Multibeam Sonar: www.furunousa.com/en/products/165t-50--200-ss260
@allan-oktane-tedesco68248 ай бұрын
I recently acquired a device like this and would like help on how to increase the screen brightness, how do I do this setting?
@FurunoMarineElectronics8 ай бұрын
Hello and thanks for watching. You can find the manual here and on page 1-1 it shows you how to adjust the screen brilliance. www.furunousa.com/-/media/sites/furuno/document_library/documents/manuals/public_manuals/gp1871f_gp1971f_operators_manual.pdf. This can be done by simply pressing the power key several times or using the slider bar.
@allan-oktane-tedesco68248 ай бұрын
Thank you very much for the information on how to increase the screen brightness. Now could you help me how to set the water temperature to appear in the fishfinder option?
@FurunoMarineElectronics8 ай бұрын
@@allan-oktane-tedesco6824 For questions like these that are more technical in nature, please visit the Furuno Forum, create a free account, and ask you question there. It will be answered by Furuno dealers, experts, and moderators. Here's a link to the forum: furunousaforum.com/
@rayfowler83769 ай бұрын
Awesome lads good to see more videos on 1971f
@antpaz08110 ай бұрын
How can I take the echo rings off my radar
@hoanggmail779811 ай бұрын
Great video.
@kennethjang916011 ай бұрын
Will this work with a baystar hydraulic steering?
@sivanesanselvaraju756611 ай бұрын
Good Afternoon Sir. How to change the position I mean from Japan to Saudi Arabia. Pls advise.
@FurunoMarineElectronics11 ай бұрын
Hello and thanks for watching. Unfortunately we do not have techs on our KZfaq channel to answer technical questions. For a question like this, please go to the Furuno Forum, register for a free account and ask you question in the GPS Chart Plotters section. You can find the forum here: furunousaforum.com/. Thanks again for watching.
@elsiearapis262311 ай бұрын
Need clarification, I have a pair of ap 250 and everything installed except the gateway . Is it one gateway per motor or one gateway does multiple . The harness comes to a y section that joins my 2 smg4 gauges but using the one gateway I can’t work out where to plug it in to make everything work . I tried unplugging port smg 4 and plugging gateway there but nmea doesn’t power up port smg4 . Am I meant to have an adapter cable to get them to co - exist . Feels like I’m missing something . Is there meant to be a second cable allowing smg to be powered up ?any help appreciated
@FurunoMarineElectronics11 ай бұрын
Good day and thanks for the question. You are indeed missing something, so your feelings are correct. You'll need to add a Suzuki Y cable with a part number of 36667-96L40. This Y cable will allow you to disconnect the current wire from your Port SMG4. You'll then plug this Y cable into the port on the SMG4. Once you do that, you now have two open ports in the Y cable. Plug the original SMG4 cable into one side and the gateway into the other side. To answer your second question, you do only need 1 Suzuki gateway for up to 6 motors, but it has to be a specific gateway. Please ensure the gateway you are using for FishHunter Drive has a part number of 34923-96L11, L12, or L13. If you do have this gateway, you'll be good to go once you add the Y cable and do your system setup. If you need more information, here are two great resources to use. www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/suzuki_fishhunter_setup_supplement.pdf www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/navpilot_fishhunter_drive.pdf Please let us know how everything turns out for you. You are going to love the FishHunter Drive.
@lb7wade51811 ай бұрын
I have been binge watching your excellent video of install and set up! Is there any new install of any 2023 products??
@FurunoMarineElectronics11 ай бұрын
Thanks for watching! Stay tuned as we are constantly working on new videos.
@lb7wade51811 ай бұрын
Furuno looks top notch and then some!!
@FurunoMarineElectronics11 ай бұрын
Thank you, we agree!😉 Thanks for watching!
@calebrensen11 ай бұрын
Hey guys we are trying to get this working on my boat in Australia but don’t have much tech support here! Do you need to have a Suzuki screen or will it work with the Suzuki smart gauge? I’m running two TZT3’s
@FurunoMarineElectronics11 ай бұрын
Thanks for watching! It isn't so much that you need a Suzuki screen permanently to use Fish Hunter Drive, but you do need one to set Fish Hunter Drive up. Unfortunately, Suzuki didn't allow for the system to be setup through a Suzuki Smart Gauge (SMG4), so to get your system setup you will need some additional components. Once your system is setup, your TZT3's will handle everything you want to do. I am not sure if you have tried reaching out to them yet, or where in Australia you are located, but I speak to the guys at JN Taylor (Taylor Marine) in Australia fairly regularly and I know they have already done a number of Fish Funder Drive installs for customers. They have locations in Henderson, Mt. Gambier, Adelaide, and Port Lincoln if that helps you. For now, here is some reading material. These documents show you what it takes to get Fish Hunter Drive set up and running. It will look like a lot of information, but truth be told, it's not really that hard once you have everything you need on hand. We just went through great pains to make the attached documents as thorough as possible. If you can't get everything setup, please let us know and we'll help you anyway we can. Maybe you can talk my US bosses into flying me to Australia. 😂 I've always want to visit. www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/navpilot_fishhunter_drive.pdf www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/suzuki_fishhunter_setup_supplement.pdf
@calebrensen11 ай бұрын
Thanks so much mate! That’s really helpful!
@samanthamalone6768 Жыл бұрын
Promo sm
@b2sreef715 Жыл бұрын
Awesome video as always Capt. Mike!
@SAAAAAAAAAAAAAAAAN Жыл бұрын
My TEU001B rusted and broke within a year. The metal balls inside fell out. Pretty disappointing
@FurunoMarineElectronics Жыл бұрын
Hello and thanks for watching. We apologize if your TEU001B broke after one year, the warranty period is 2 years, so that is still under warranty. Please contact our USA HQ at 360-834-9300 and ask for warranty repair.
@garymcnally1496 Жыл бұрын
I'm a retired guy who is mildly tech challenged. I have a Furuno TZtouch 3 and DRS12 open array radar. I had a Furuno radar on my dive charter boat back in the 80's. I was sold on Furuno then, I"m still a Furuno guy. SO, these "comparison" videos drive me a bit crazy. I've been out of boating for a few decades and I have some of the best electronics money can buy for a boat my size. The units are so sophisticated that I will never be able to learn all that they do given where I'm at in life. All that to say I don't care what the comparable Garmin or Raytheon or Simrad unit can or can't do. PLEASE JUST HELP ME LEARN WHAT MINE CAN DO AND HOW TO USE IT!! (eye roll).
@FurunoMarineElectronics Жыл бұрын
Hi Gary, thanks for the reply and your continued patronage! Check out this playlist of short TZtouch3 instructional videos, where we go over the basics for using your TZtouch3 MFDs: kzfaq.info/sun/PLNAnyrS0eNSyQ_zJFH7vXhpgHW3DWCf3l If you have suggestions for more videos like these for a specific feature or function, please leave us a comment - thanks again, Gary!
@FurunoMarineElectronics Жыл бұрын
You can also check out this playlist as well: kzfaq.info/sun/PLNAnyrS0eNSzoiYxtAqJ-SGapLt7O2P5X