What is the spec and sizes of the 2 different bearing types being used?

Music?

Where can i order a new fresnel lens

Worst assembly video ever, wish I'd never bought this goddamn kit

In the vid parts fit with each other like silk. In reality every single part needs fit sanding, hole size adjustment, all the hex joins need careful fit filing, all seam joints need to be made to go away, bearing tubes need careful reaming etc etc etc. Part thickness fit along the main shaft axis have to be carefully adjusted otherwise gear meshes will be out. This is not a beginner project and really needs decent engineering skills and close attention to detail to successfully complete

💀

Holy crap 8:20 is so annoying

Возьми молоток для вагонки, так ещё быстрее будет😂😂

This guy deserves likes

Do you know if this mouse can be hooked up to a different USB dongle i lost mine it came with and like how it works

Super

me and my 5y o iphone : "we can definitely beat that " 💀💀

nice face reveal on the reflection

I tried this and it worked once and the problem returned. Hotend PID tuning solved the issue for me.

Nice thing to print

Will Smith slapped me so hard i started to get this recommended.

DRIVERS, DRIVERS, DRIVERS????? Not Drivers

Desde medellin Colombia 🇨🇴 me gustaría tener mucha mas información. Quiero aprender a utilizar sus productos y montar un negocio aqui en Medellín

Genial

Que precio tiene?

saw an article about this today, but I had no idea it would actually have motors to move things around. that's pretty awesome

All interesting stuff is here👉：antinsky.com/

Ever deal with layer shifts? I've been getting some annoying ones recently. Aside from that the printer is really good

8:40 belongs before 6:16

Great video but you didn't attach the rear turbines to the main fan. I had to dismantle it at the end to gain access and join it properly.

Do you know if there's been a firmware update yet to stop the stupid high lift when you delay start to allow for heatup? The only reason I haven't ordered one so far. Lift up the plate high and let resin splash all over the cover... Why?

I'm building mine tomorrow just printing the last set of parts

I have a support ticket as my mono m5s seems to have a leveling issue. I will update this comment when I find out what happens.

Itsnot correctly what are you showing here.

Horrible impossible à monter des la première partie . Les mains sont devant , on ne voit pas les pièces , la balance ne marche pas . 3 sortes de pièces a choisir ...mais’lesquelles ? Les trous sont trop,petits . Etc....et le pdf n a aucune aide . 1,5 kg de filament à jeter . Lamentable pour un kit officiel bambulab .

Everything @icetek0713 said and a few more points. First time through the video before deciding to build one of these it seemed straightforward, but it’s anything but. During the assembly steps the person occludes critical things with their hands. There are a number of small parts that are similar but you have to bounce around through the video to make sure the part you think is being used is the one you are getting ready to use. Hold the parts up to the camera so we can see exactly which part is which. The escapement is critical but there’s no explanation of why you use the escapement part labeled 1, 2, or 3. There’s mention of binding but for something so critical, this should be better explained. And there's a number of places that are supposed to be slip fits for screws but the holes have to be drilled out. Those holes should be enlarged to print properly without requiring rework. There also seem to be clearance issues between the balance wheel and the spring anchor point. Maybe there’s something I’m missing, but if so that’s just another weakness in this video because we can’t see the parts well enough or their final positioning when properly assembled. These parts are small, some are very similar, and the yellow color in the video washes out detail we need to see. I’ve spent a week printing the parts and now four hours trying to assemble it and countless back and forth FF/RW with the video. My eyes are older and I wear glasses and this video is no help for any of that. Please redo this with showing the parts clearly to the camera and call out their designators on the print 3mf file. Put ink marks on one side of the parts so we can see which way tiny or hard to see stuff is oriented. Don’t use yellow. Grays don’t look good as a model but are much better for seeing important detail. I’m sure this is a great model but it’s complex and there’s lots of things the video glosses over that leave us wondering and having to look all around and over and over to figure out. Until you redo the video I really cannot recommend this kit except to really advanced makers.

What type of glue are you using

this tutorial is outdated

Need better explanation on which parts are needed as there are more parts printed than is needed. Also, need a better explanation of what screws are used in each step. Maybe a visual would help. Especially for first timers. Also colors that don't contrast so bad would be helpful too. I also got to the end of the build, doing it the way the video said to only to realize that the video did not cover at which point you add the screw covers.

Thanks for posting this series; it helped me get a feel for what the kits offered, and which ones to get. :)

What is the white stuff that you put on it what does it call

Hi, I have a similar noise, can you explain your fix a little mores please?

Is this available for purchase anywhere?

Thanks for this video!

It doesn't seem to work on the latest version. I've done a full port scan and no port open.

But show the print test finished piece 😢

This is an animation. It means nothing.

what a useless video. I can get more info about leveling the plate by staring at my fishbowl

Does nfep last longer than fep?

Wish my prebuilt used this 😢

I have a problem my mighty 8k is not printing the ctb files I can see the file on the monitor but the print button is inactive! What is the problem. (my framevare update is the latist and the chitubox is 1.9.3)

Thx😂 I didn’t hit slice

Can you recommend an instructional video on how to install the antinsky flex plate on a Phrozen Sonic mini 8k?

Hello, Can I get the value for Phrozen Printer? I'm the new at using AntinSky Resin