Let'sgojt

Пікірлер

@gusshelgosh4724 Күн бұрын

Where can I get that brush ?

@christy1705 12 күн бұрын

How much was all the paint

@christy1705 12 күн бұрын

Epic I want to something like your screen

@alireiazat7609 26 күн бұрын

Stone work much better

@huihup Ай бұрын

I have a copy of rupes that you got, on battery ! Modified to fit the Parkside 8a battery and also have problems with heat ! Great tool 15mm throw but the gearbox and the backing plate gets very very hot, especially the gear box gets hot and have to use gloves because if I touched with my hands I will bun myself ! It’s the perfect copy that you got over there but on battery! Nice power Dah!

@lukedias5859 Ай бұрын

So much womp womp

@fatchrome8708 Ай бұрын

Mighty helpful video thank you sir 🙏

@anony_mouse1 Ай бұрын

Should've used a Chom Chom. kzfaq.info/get/bejne/fpuHqqdyqqnHook.html

@richard75013U Ай бұрын

Thanks for this video @Let’sgojt

@Michael-ri2eh 2 ай бұрын

Wow, it looks so much like the Horbor frate . HOW much did it cost and you still have to modify the tool I would ask that tool copy for some kind of discount. At the Snap-on coast of tools why trick out a tool if you pay so much. Over all great content

@vinboughton4751 2 ай бұрын

Came out great

@dragonqueen4799 2 ай бұрын

Pet stone was used for like 45 seconds lol and your Dyson was filled with dirt so it probably needed to be cleaned to give it a fair chance

@marialoves2talk 2 ай бұрын

Great video! I am shocked that a little stone did a good job in picking that dog hair up over a Dyson. The brush was pretty good too.

@MrJago1212 3 ай бұрын

Great video dude!

@gsdls 3 ай бұрын

Short and sweet for sure. Thank you for the demo

@harbinguy1 3 ай бұрын

Thank you for your video! what shower pan did you use?

@StraightPineAcres 3 ай бұрын

think there would be any issue cutting out the back outside corner for a window? If it can be hole drilled out for the mixer valve, maybe an oscillating tool with metal head could cut out a window? what are your thoughts? Thanks! Sam

@junlong68 3 ай бұрын

Thanks for the video. Great info. A question, can you leave the cable as “bypassing “ when you are driving? Thanks

@LetsGoJT 3 ай бұрын

I believe no but message the guy on his email. Which is avaliable in the system

@dane4890 3 ай бұрын

Great wall but the light around it kind of sets iit back a little, but really nice job on the wall!

@user-ms2vq6hj2o 3 ай бұрын

I clean house, thank you for the great advise!!! Always need help with hair!!!! Yikes!!

@dfoster7001 3 ай бұрын

Did this a year ago and it turned out awesome for 100" screen. Going to push it to 120 today

@scottmccabe1310 4 ай бұрын

How many square feet is your screen My screen is 70 ft.²

@BoneAppetite73 4 ай бұрын

Great video/info

@krasnaludek298 4 ай бұрын

That setup renders the bed pretty much useless. I’ve resolved to run the stock spare & accept that it can only be used on the rear (i.e. getting a flat on the front would require a 3-way swap).

@fortpatches 4 ай бұрын

So what do you think about it after having it installed four years now?

@LetsGoJT 4 ай бұрын

Honestly great

@Ihavetopoop718 5 ай бұрын

Didnt want to split your fenders while you were in there?

@robertprosser5023 5 ай бұрын

Jump to 9:30 and save yourself 9.5 minutes of time in your life.

@sunnyboymark 5 ай бұрын

To bad you didn't have the Uproot clean or fur viking when you made this video. But they're avail now and work great at getting up pet hair on all types of fabrics.

@queenrussia9337 5 ай бұрын

Omg thank you!!!

@oswaldobetancourt5905 5 ай бұрын

Thank you for the video, do you have the amount of oil that goes in front and rear. I put two in the back and 1 1/2 in the front and I am over the lines. Thank you for any help

@eric6650 5 ай бұрын

Would this apply to the new 2024 Jeep Willys?

@LetsGoJT 5 ай бұрын

I would say if you haven't modified your suspension then you most likely will be fine and if not the steering system dampener etc is warranty so leave it.

@eric6650 5 ай бұрын

@@LetsGoJTat what point nearing the end of warranty I’m guessing to change certain parts that would eventually effect the wobble. I noticed you added the Rubicon Express NFS stabilizer, is that something of a better stabilizer than what the Willys use(stock). I was eventually thinking to put a Fox shock version I had seen on another channel. Would this give a more firmer feel?

@LetsGoJT 5 ай бұрын

Fox shock is great. They all are factory is usually the lower end on the steering stuff.

@eric6650 5 ай бұрын

@@LetsGoJTthe upgrade used in the video (rubicon express nfs, is that the rubicon stock or is it the fox shock version for the Rubicon?

@altillman1448 5 ай бұрын

What your seeing is brittle plastic break down of the Lhr21 anti spinning <rubber> shroud. Didn't follow dielectric lubrication which is normal maintenance referenced in the directions. A replacement is $15. Item # 651.245. Or google the Kevin Brown Washer Mod.

@jl456 5 ай бұрын

Not that easy when you have drywall already installed.

@DocSavage-xo8je 5 ай бұрын

Hey brother, I don’t have IG but I’d love the dimensions for this. I can’t dumb them anywhere.

@davidmillan2057 6 ай бұрын

royal purple garbage

@Berserkeroffroad 6 ай бұрын

Thanks for this. The provided instructions were crap.

@craigversetti5700 6 ай бұрын

LOVE seeing the American Flag in Canada 🇨🇦 I'm assuming of course that your American and moved there ( idk how or why ) but your showing is LOVE so in return I'm gonna get Canadian Flag up in my garage .... know it's you that made it happen my Jeep Brutha!!!! 😂

@PRO4XKEV 6 ай бұрын

Factory gasket looks like the Lube Locker gasket, yes they are re useable. I find it odd factory is using these usually they install with silicone.

@Big2na 6 ай бұрын

Great install! I work with a guy who installed the same one, says it works great

@alittlepatchofgreen456 8 ай бұрын

You should have used CHOM CHOM, works great

@DawgHousePodcast 9 ай бұрын

How is the reception on this antenna?

@LetsGoJT 9 ай бұрын

Not bad in town. But in in the bush obviously not as good

@user-pr2jb9ks2w 9 ай бұрын

What if my white leather seats are perforated? Would you still do the same with the product on the brush?

@junifranqui 9 ай бұрын

Great vid. I'm gonna install my rear diff on the bronco this weekend.

@bartonblack7953 9 ай бұрын

Funny stuff! Twisty little pubes....... I'm laughing. On the reason I clicked on this video. Great! Gonna buy me a pet stone.

@wayne3442 10 ай бұрын

Good job

@vincentculletto39 11 ай бұрын

It’s a great tool to have for jeep owners. Just fyi they make extensions for this cable to make it easier to get to them

@theelifeofdez381 11 ай бұрын

Get that intro to spread across the whole screen brotha. * 4 cars I really appreciate this video bro

@marcusk7855 Жыл бұрын

Those long hairs are easy to get up. Short hair is much harder.

@karentilley4356 8 ай бұрын

Oh no. That’s why I’m here😮

@gerard0l6569 Жыл бұрын

They look nice, but man thats ALOT of work

@coltcele8420 Жыл бұрын

Enjoyed this video immensely and welcomed your thoughts on lubricating the paint. I used to show a single stage paint with my father. Regrettably, he passed and the vehicle became mine. I was able to store it properly (mechanically and environmentally) for 17yrs, but storage was all I could provide (cramped quarters, etc). I've watched this a few times as I will soon be removing layers of dust and oxidation. I've detailed p/t as both an enthusiast and adherent to the "legends" of the field and referred once back to your video. Thank you for your insight and expertise.

Ең жақсы KZfaq

Пікірлер