Parabéns pela iniciativa estou fazendo uma conteção de pneus e da muito trabalho colocar a terra dentro. 👋👋👋👋👋
@peterrobins37087 ай бұрын
Think I'm gunna have to build this tool...but being a little lazier/impatient I won't have a crank handle, I'll be using a rattle gun hahaa Great work, great idea. Been thinking about one of these for a while but never got there & now I seen yours I know its a must do. A great idea is usually genius because its also simple. This is genius
@m.weston71148 ай бұрын
Now you have a bulged tire on top, instead of having a flat surface to stack the next tire on. NOT good.
@VRtechman Жыл бұрын
My ideal would be to separately using a Hydraulic Press to ram lots of tires as apart of assembly line on the job site. 🤔
@slaplapdog Жыл бұрын
Brilliant. I want to use tires to build , but the amount of labor that it takes to pack them has put me off. Yours is the smartest solution I've ever seen.
@JDHumphriesUtah Жыл бұрын
Do you have a copy of the plans?
@AB-vc7ox Жыл бұрын
You need to wet the dirt and tamp it to get compaction or your wall it will settle with time.
@scottlowther31802 жыл бұрын
DO NOT DO THIS, IT IS A RECENT DISCOVERY. THE STEEL USED IN TIRES., ESPECIALLY FROM OVERSEAS IS THE LOWEST "GRADE" OF STEEL (RECYCLED) RADIOACTIVE STEEL . THE STEEL USED IS RADIOACTIVE TO THE POINT IT WOULD JUST FLUTTER ON A U.S. GIGER METER (OVERSEAS ARE MORE SENSATIVE AND "TICK"). BY "USE" OF TIRES, THEY GET MORE RADIOACTIVE. THE "TYPE" OF RADIATION, IN THE STEEL, IN TIRES, IS THE "WORSE" KIND. IT IS WHY THEY USE IT IN TIRES. THESE WERE NEVER MEANT TO BE RECYCLED. I LOVE EARTHSHIPS. I AM LETTING YOU KNOW TO SAVE THEM. CHECK YOUR HOME IF YOU HAVE ONE, AND DO NOT REUSE TIRES.
@JDHumphriesUtah Жыл бұрын
Wow. That is very good to know and scary, too. I will check with a buddy of mine and see if they have a small radial meter I can use. I want to see myself. Thank you
@AlexEarthshipLeeor2 жыл бұрын
interesting approach! if anyone is interested how to do it very easily and dont have access to this machine here is how i do it.. with a small hammer and minimal effort also.. kzfaq.info/get/bejne/f9CCfLh9qNKyco0.html
@ugenegareth93392 жыл бұрын
;;;;;;;;;2 Esdras 2: 31 -100 ;;;;;;;;;
@daveforman50972 жыл бұрын
Brilliant!
@alexegorov63792 жыл бұрын
A very interesting method! Thank you for the video. What kind of soil have you already worked with?
@JDHumphriesUtah2 жыл бұрын
Just the native soil in the high desert are in which we live. It’s about 25% small rocks.
@anesthesiadreamin2 жыл бұрын
Great idea, works much better than my fabbed tire lifter... I like the hand crank you added, I think I would just weld a bolt on top and then use my electric drill with a socket on it to make it go up and down faster. Although your system works pretty dang well as it is. 👍 Thanks for including instructions! You are a very crafty guy
@mothanwrdz2 жыл бұрын
Sell it! May be too late to patent it now.
@ORIGINALLANDEROS3 жыл бұрын
How does it work
@JDHumphriesUtah2 жыл бұрын
The inner hooks lift the lip and create a downward pressure on the outer legs as you tighten the screw
@ORIGINALLANDEROS2 жыл бұрын
@@JDHumphriesUtah niccce
@GhostsonAcid3 жыл бұрын
Haha, I designed almost this exact same thing in 2018... on paper... : / -Glad to see someone else thought of the same thing! -Good job. Mine was going to be made of a standard, scissor car-jack, and chains and hooks to grab the inner edge.
@humphriesscreenprinting76263 жыл бұрын
I suggest NOT oiling the central threaded shaft or nuts. The dirt builds up and acts like sand paper on the threads over time. Keep a brush nearby and brush off excess dirt prior to turning the handle. It only takes seconds, yet saves a lot of effort.
@aaronstrerk55213 жыл бұрын
Send this to an Earthship building company and they will probably pay you to make them.
@antoniorodrigues99883 жыл бұрын
What a wonderful idea you had. It seems that you have read my thoughts and suffering, I am poor and I want to make my house out of old tires. It turns out that one of my biggest dilemmas and difficulties would be to pay a team to help me inflate the tires. With your wonderful heart to share your wonderful idea that God has given you, I am forever grateful. I am already subscribed to your channel as a form of gratitude, a big hug from Brazil.
@armandofaso20734 жыл бұрын
¡Bravo!
@humphriesscreenprinting76264 жыл бұрын
The other video is kzfaq.info/get/bejne/eLaFdcZ9nMrUpWg.html
@humphriesscreenprinting76264 жыл бұрын
Also, because I used tires of the different outer diameters as I built upward, I had to use rocks to fill in the gaps. The first layer used my largest tires and all the layers above it had gaps. If you cannot find tires that are all the same dimensions, try to place them so that the ones with the same outer diameter are in the same area to prevent the gaps as you go upward.
@humphriesscreenprinting76264 жыл бұрын
Here's a link to the PDF that shows the supplies and dimensions to build one. I apologize that it is not also in metric. bit.ly/JDHTirePuller
@f520233 жыл бұрын
This looks perfect 👊🏼 Did anyone else test this?
@JDHumphriesUtah Жыл бұрын
@@f52023 I’m not sure, but I’ve used it for hundreds of tires.
@eohrazda70006 ай бұрын
Thank you so much for this!
@humphriesscreenprinting76264 жыл бұрын
Here's a link to the PDF I created to show the dimensions and supplies needed for building one: drive.google.com/file/d/1GZEJXVGIofwVPh2J7k2N_xcm6FQJNusY/view?usp=sharing
@krislyons15914 жыл бұрын
Genius, we are building a retaining wall this summer so this will make it quicker thank you than you thank you 😊
@humphriesscreenprinting76264 жыл бұрын
I am glad it will be of use. I hope it will be as useful for you as it was for me. Prior to building this, I was exhausted after 10 tires. In use, I was able to do 30-50 tires and didn't feel nearly as exhausted. I will post the plans I drew up so you can build one, too. (If I can figure out how to do that.)
@krislyons15914 жыл бұрын
Great idea we have a covid19 tire filling project! A million thanks
@armandofaso20734 жыл бұрын
Excelente video genio, al fin veo una buena idea para rellenar las llantas sin pasar horas martillando.
@humphriesscreenprinting76264 жыл бұрын
Muchísimas gracias, Armando. Aquí está el plan para construir uno para su proyecto: bit.ly/JDHTirePuller . Por favor, perdóname porque las dimensiones no son también métricas. El otro video es kzfaq.info/get/bejne/eLaFdcZ9nMrUpWg.html