Made a 3 tier shoe rack from an old pallet a couple of weeks ago using screws and steel joiners, god I wish I'd found this video before I started, great vid!
@PaulHoff-h5n2 күн бұрын
What's the thin saw called, thinner than a Tenon isn't it?
@batchrocketproject4720Ай бұрын
I love this demonstration and it contains much wisdom, thanks. My father was a carpenter and I remember as a child marveling at the box joints he would make on even quite wide boards (8" or so boards with 1/2" fingers), perfectly symmetrical, all cut by hand. He died over 40 years ago but I still use his dividers, in fact they're right here on my desk as I type. Your markup was perfect. I don't think my father would be impressed with your 'toy' saw (as he might have called it, no offense intended!), as he used a ~12 tpi tenon saw for all joints, cleaning up with razor-sharp chisel. He also eschewed the coping saw as he could rapidly hog out the fingers with chisel and mallet before paring to the line by hand. There are few things more pleasant on the eye than a well proportioned and symmetrical box joint and I'll be using your guidance to more often include them in my projects. Thanks again, really enjoyed this. 💯👏
@briannicholson26443 ай бұрын
Hi there great video, like to learn more in this side of things Trying to do a very small project, hopefully try and do the finger locking for my very first time Thanks for your video 👍
@VindictiveMoose3 ай бұрын
Great video. I was just getting into basic woodworking with hand tools since I don't have the space or money for power tools. This was exactly what I was looking for because most videos are using power tools.
@beastking553 ай бұрын
GREAT JOB
@christophercramer40074 ай бұрын
Great teaching tool, using the puzzle pieces to illustrate the strengths and weaknesses of the wood grain.
@christophercramer40075 ай бұрын
I appreciate the level of detail used in describing these saws and their applications. I attempted to follow the link to your site for more information on saws, but received a 404 error message.
@sleverlight5 ай бұрын
Is there a way to do without glue?
@sleverlight5 ай бұрын
Love that u didn't rely on machinery I wanna start woodworking but wanna do it only using simple tools such as a saw, thanks again
@lasermarkingguy5306 ай бұрын
Brilliant work!
@remka20006 ай бұрын
Just found this video, thanks a lot! I have a very limited tool section, and wanted to start to learn woodworking, this is super useful. I know this is a 4 years old video so maybe you already did, but would love to learn more about japanese joints, the kind that doesn't involve any screws 😊
@hillcountrygarage7 ай бұрын
That's fantastic information on the wood grain.
@sepatufutsale8 ай бұрын
am I see wolverine become a carpenter ??
@getintowoodwork8 ай бұрын
😄 I'm available for stand in work on films
@ivantriadi62188 ай бұрын
This connection is the strongest joint, because it has a stepped inclined joint surface. This means that both work together to withstand the load, and there is no significant movement that affects the joint.
@meghanihamid9 ай бұрын
I love how detailed your videos are. Most newbies like me would find the detailed work a bit frustrating at first, but when the end product turns out like yours, it is all justified and sense of accomplishment is awesome. I am currently practising box joints using your teachings from episode 04 and having lots of fun with it. Thanks again.
@getintowoodwork9 ай бұрын
Awesome, thank you!
@goodie2shoes9 ай бұрын
Great video. KZfaq is crammed with slick 'superhero' woodworkers who have all the right tools and a million-dollar workshop. It can be fun to watch, but I've found your videos a lot more helpful and down-to-earth.
@getintowoodwork9 ай бұрын
Thanks 👍
@James_T_Kirk_17019 ай бұрын
Now drill straight down and pin them with a dowel.
@getintowoodwork9 ай бұрын
Yes you can, and it sounds a good idea. Unlikely to fall apart if pinned, but I haven't tested it, so can't say for sure.
@brick_is_him9 ай бұрын
5:42 min in and know nothing
@brick_is_him9 ай бұрын
you 40 year old men praying him like his god
@brick_is_him9 ай бұрын
4:28 making a box
@brick_is_him9 ай бұрын
and I don't lie
@brick_is_him9 ай бұрын
no like
@brick_is_him9 ай бұрын
you should name yourself self get your out of woodworking
@brick_is_him9 ай бұрын
my DT teacher sent me this on teems very med
@reaper0606709 ай бұрын
I need a fret saw pal. I hink a trip on Amazon is needed now.. Would u be able to get one at B&Q??
@getintowoodwork9 ай бұрын
Axminster Tools, Workshop Heaven, Classic Hand Tools, all online all should have decent quality ones
@user-uo8vz3cz8m9 ай бұрын
What glue did you use
@getintowoodwork9 ай бұрын
I can't recall, but most likely regular PVA
@user-uo8vz3cz8m9 ай бұрын
What glue did you use
@getintowoodwork9 ай бұрын
Long time ago now, but probably PVA wood glue. Otherwise a liquid hide glue.
@user-uo8vz3cz8m9 ай бұрын
What glue did you use
@elgranviaje718710 ай бұрын
Great video and really well explained
@getintowoodwork9 ай бұрын
Glad you liked it!
@rogb3199 Жыл бұрын
I've got some to do soon. I used to use a router but I'll do it by hand like this. Thanks
@getintowoodwork9 ай бұрын
Cheers, go for it
@nickwilkins9299 Жыл бұрын
Thank you so much for this fantastic video! Super helpful, really well explained and totally inspirational.
@getintowoodwork Жыл бұрын
Cheers, great to hear. All my work is now on my main channel, which you can find by searching @mitchwoodwork on KZfaq
@nickwilkins9299 Жыл бұрын
@@getintowoodwork Got you; couldn't work out why you didn't have more subs!
@discoverlaurence Жыл бұрын
Great upload. Thanks.
@getintowoodwork Жыл бұрын
Cheers. All my work is now on my main channel, which you can find by searching @mitchwoodwork on KZfaq
@symons666 Жыл бұрын
Nice work, but cutting straight for a beginner usually isn't happening, i have been trying for years and still cannot manage it! a beginner is not going to have a beautifully sharp chisel, or probably not even a moderately sharp one for the precise cuts, and even at 57 I still don't own a fret saw, or anything similar !! Great job on the video, but as a beginner, mine would look nothing like that ! I can make and sharper knives, but wood is something else !!
@getintowoodwork Жыл бұрын
Cheers. You've identified what's important, and I've posted videos on sawing and sharpening which should help some. Jewelers, fret, or coping saws are widely available, and you don't need fancy, expensive ones for waste removal in joinery. Good luck with your woodworking. All my work is now on my main channel, which you can find by searching @mitchwoodwork on KZfaq
@lilnikoy Жыл бұрын
I'm loving this. So basic compared to the ridiculous tutorials going on at the moment with people showing off their fancy machines. Wish you had more of these videos I've learnt so much so far
@getintowoodwork Жыл бұрын
Cheers! All my new stuff is over on youtube.com/@mitchwoodwork
@MISANTHROPE1964 Жыл бұрын
Mitch, Thanks. I have had a about a dozen rough hunks of Osage Orange firewood sitting in the shop for a number years waiting for me to do something with it. The stuff is tougher than a mother in laws heart, but I’ll give your method a try.
@plainnpretty Жыл бұрын
Thanks for sharing this
@getintowoodwork Жыл бұрын
Cheers. No longer posting on this channel, but on Mitch Peacock designer woodworker channel
@younginsong984 Жыл бұрын
Thanks! Is there any easy way to unnail after nailing box joint?
@getintowoodwork Жыл бұрын
Not that I know of
@fayz44awad Жыл бұрын
thanks
@VincesEngines Жыл бұрын
Thanks for showing with basic tools and how to correct mistakes
@getintowoodwork Жыл бұрын
Cheers
@axelbottenberg4676 Жыл бұрын
I made a nice pile of firewood. How do you get the precision in all this?
@getintowoodwork9 ай бұрын
Patience and practice go a long way
@unitycatalog2 жыл бұрын
Great channel and series
@Aengus422 жыл бұрын
At last! A Brit doing a woodworking course from the ground up! Woohoo! Ahem... It's taken a while to find you out of a pile of Americans measuring in furlongs and cubits. I hope you're metric, i'm only 26 seconds in. I stopped it here so i could subscribe and ring your bell (If you'll pardon the expression!😆) Right, all subbed up. I'm diving back in...
@ucenicul2 жыл бұрын
Beautiful, thanks Mitch
@Pepperpot6662 жыл бұрын
Just wow. The "box" looks amazing. This was supposed firewood. At first i thought it would be some weird cake shape, but it looks special, different from the usual boxes. Over the video series, you made it look so easy. Thank you very much to let us follow along your journey.
@getintowoodwork2 жыл бұрын
Thank you very much! Hope I've inspired you to have a go
@captkulage2 жыл бұрын
Extremely helpful, thank you
@dannyboy_dannyboy82742 жыл бұрын
This is a real man! I’m fascinated by wood working, just wish I had a big garage!
@getintowoodwork2 жыл бұрын
Cheers!
@Sid.master2 жыл бұрын
Great video bro
@getintowoodwork2 жыл бұрын
Glad you enjoyed
@wyvern71512 жыл бұрын
I guess that this is one time where a good layer of wet slippery glue is an advantage? Get well soon Mitch.
@getintowoodwork2 жыл бұрын
Cheers
@BigHenFor2 жыл бұрын
Thanks for this little project, which has taken a really interesting turn by introducing steam bending as a technique. Will continue to watch this with interest as I've watched a video on Japanese craftsmen making Cedar Bento Boxes and other food containers by utilising steam bending and was intrigued how to replicate this technique in a home workshop.
@getintowoodwork2 жыл бұрын
Pure steam bending of the spalted ash would certainly fail, but mixing heat and laminating will get the result I want. Hope you enjoy it.
@Pepperpot6662 жыл бұрын
A little bit of weird design, but it makes a very interesting project to follow with all kinds of skills to practice! Thank you!