They build them like that now, just so they break and you buy a new one. The best machines were made about 25 years ago.
@muhsintot31382 күн бұрын
Nice ❤
@09amusement3 күн бұрын
That's an Allis model C
@SkylarHillShop3 күн бұрын
Thanks, I never noticed the decal was wrong. Looks like the C is about 3.5" longer wheelbase that the B. What are the other distinguishing factors?
@09amusement3 күн бұрын
@@SkylarHillShop apart from the tricycle axle layout, there's very little difference between the two models. I believe the C and CA had very slightly more hp than the B.
@09amusement2 күн бұрын
We have loads of Allis B tractors in the UK 🇬🇧 🇬🇧. I have one pending restoration myself. Model C's aren't often seen over here.
@NIKKIKEM3 күн бұрын
That is VERY helpful. Thank you.
@Corza104 күн бұрын
Mine is over 20 years old. Never serviced. Just stuck and started grinding. Working out if I attempt to fix myself or send it off to a repair shop. Might give it a go myself.
@erwindeleon6184 күн бұрын
Good stuff, just missing the bolt sizes on the one you fixed top left behind the coolant. this video doesn't go to the mount/support underneath so with this and another video i was able to understand what to do. thanks
@Rick-qf5de5 күн бұрын
These types of tires don't work in reverse... And if you spend them you've dug yourself in... Turf tire can you use a oscillating tool to cut off every other row... Straight bars... They work forward and reverse, just buy the tool and cut up all the tires you want...
@mikesworld606 күн бұрын
Looks like I need a sweet zero turn mower!
@SkylarHillShop3 күн бұрын
Thanks, its my brother's. The suspension made it even nicer.
@krowbar236 күн бұрын
Diffently need mud flaps 😂😂
@Failedmusician8 күн бұрын
Dude you're awesome!!!! thanks for the tip. I have been struggling with all sorts of standards and this is easy enough to follow.
@jags6889 күн бұрын
Was that steel tubing?
@SkylarHillShop2 күн бұрын
Honestly dont remember. I think it was the pvf coated steel stuff. I really like the nickel copper lines
@GeneCasto11 күн бұрын
Brilliant! Thank You😂
@brentsrx718 күн бұрын
The primer bulb is not actually a primer bulb. It's a purge bulb. It only purges air from the fuel lines so that the choke can work effectively to pull fuel through the jet.
@DMBGames201618 күн бұрын
If you switch the sliding rails to the other side, (flip flop them) then the handle will not get hit by the suspension.
@LB-kg2xh19 күн бұрын
thanks! smoked my knee twice today with the damn door
@henryw5023 күн бұрын
Thank you for the fix. I did not have a clue as to why my dishwasher door was in freefall!
@donmundt357326 күн бұрын
The first rule of working on hydraulics is to clean everything thoroughly before opening it up so no dirt can get inside. If that thing had a second chance at life from the fluid change, the dirt that fell into it will certainly cut that short.
@aros007z28 күн бұрын
Awesomeness
@SteinsquatchАй бұрын
Want to buy another tractor 🤣? As much as I want to fix up the H I think it’s on the bottom of the project list.
@SkylarHillShop29 күн бұрын
Maybe, I like to wait until you have completely given up and the price is almost free.
@Undertaker_Bass_Ride29 күн бұрын
How much do you want for it? Does it run?
@colemanbecker351Ай бұрын
Found the rubber piece on the floor. Now making replacements, wow this is a weird design...
@colemanbecker351Ай бұрын
Found the rubber piece on the floor. Now making replacements, wow this is a weird design...
@colemanbecker351Ай бұрын
Found the rubber piece on the floor. Now making replacements, wow this is a weird design...
@mattb5141Ай бұрын
It was a 3 cylinder tractor for last 12 years lol died when #4 died
@SkylarHillShopАй бұрын
Its not dead just sleeping, hopefully it'll wake up soon
@jamescrombie6520Ай бұрын
Looks simple enough
@mrsgilday1977Ай бұрын
Best commentary ever. You were saying exactly what we were thinking. Thanks for showing us the easy, but annoying fix.
@TheGlantzs13 күн бұрын
Yes. lol
@falconeaterf15Ай бұрын
Proper way to test a leaf blower is to lubricate the nozzle, start engine , and insert as far up your rectum as possible. Then lock throttle on full power setting.
@ciphercode2298Ай бұрын
Replace the clutches spring with springs from a ms260. Theyre stiffer
@edwardkane3237Ай бұрын
It was just as I suspected. Your video confirmed it for me. Thanks for sharing it with us on KZfaq.
@danrybАй бұрын
Just happened to me! I knew the piece came from the dishwasher but no clue from where! Thanks! Agree, looks easy but annoying! 😂
@KaiserBladeАй бұрын
The one on my x300r has a reservoir high up on the trans. I never see one like it in these videos. So far.
@solexxx8588Ай бұрын
You should have pressure washed it before you open it.
@wanderingquestions7501Ай бұрын
Thanks
@andyperkins2523Ай бұрын
Screw picking those up by hand just assemble them on the transmission input shaft and move the flywheel with pry bar to line the bolt holes up and put you're hand through the inspection cover with the bolts for the clutch and torque to spec also cut slots on the end of you're guide studs and use flat tip screw driver to remove them. Sometimes pliars will not be an option to use.
@666kty3Ай бұрын
Dont go over 60 for a residential home.
@tommensforth8159Ай бұрын
Had no clue. Damn near chucked out a brand new M18 drill. Calmer head prevailed and one KZfaq search later, you've solved my issue.
@matthewpeterson3329Ай бұрын
Excellent video. Our GE Profile dishwasher door spring/cable/pulley failed within the first year, and it was a very expensive unit. Once pulled out for inspection, you realize the pulley is cheap plastic and the cable is actually cheap cotton cord with plastic ends. Seriously, the most exercised part of the entire dishwasher is made of the cheapest possible material. New appliance manufacturers should be ashamed of themselves. My previous home had a 24 year old Whirlpool that was still working perfectly when I sold the home.
@Jared01Ай бұрын
Just as a heads up, I contacted the company about purchasing one of these, and they let me know they don't sell direct to the end user, so people will need to find a local dealer for Seats Inc parts.
@SkylarHillShopАй бұрын
Here it is on eBay www.ebay.com/itm/223066432793?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qzdUugMWRMi&sssrc=4429486&ssuid=IVVWoxsdS0m&var=&widget_ver=artemis&media=COPY
@Jared01Ай бұрын
@@SkylarHillShop Seats Inc also recommended looking at Trac Seats. They have a website with free shipping.
@peacefieldfarm_mnАй бұрын
I have a small electric Ryobi ZT mower. My yard is so rough, It rattles my teeth. Can I send the seat dimensions to the company and get something that will fit my seat? Thanks for making the video!
@timburton9514Ай бұрын
FedEx just delivered mine for my Mahindra 1626. I’m excited!
@SkylarHillShopАй бұрын
I bought an older skidsteer after I made this video. One of the first things I did was add this toothbar to it too!
@NormBrennanАй бұрын
YA YOU ARE RIGHT I HAVE THE COILS ON THE REAR OF THE SEAT , BUT THAT SYSTEM WOULD BE MUCH BETTER GOOD JOB
@larrymcgarage2152Ай бұрын
I have used used motor oil in old dry rotted lawnmower tires. It seals them right up. A little messy if you have to break them down but very cost efficient. Never use dry rotted tires on a highway vehicle.
@michaelbarnes7086Ай бұрын
Awesome video!! Question? What's your thoughts on using kawasaki engine oil filter on my bad boy revolt 54in standon? I ordered engine filters and hydrostatic trans filters. Their identical in size, weight and thread pattern? Would be great using only one filter for both. Thanks for responding.
@SkylarHillShopАй бұрын
Google "wix filter cross reference" look up both filter numbers and you will be able to see the micron ratings, relief pressure etc. From there just pick which one you like best.
@davesherman6610Ай бұрын
Well done!
@SkylarHillShopАй бұрын
Thanks, have a good weekend!
@stevehinton5300Ай бұрын
Parts aren't there..!
@metaquester1570Ай бұрын
Yeah, I do this all the time with my Kobalt XTR. It says it right on the chuck if you look close
@tpmbeАй бұрын
I didn't have a clue either.....thanks so much. I used to just tighten but not back off a click. I'm going to practice now.
@gosselinsergegsАй бұрын
Strange things slowly going forward sometimes and goes find backward
@coltontucker6705Ай бұрын
If I were you I would keep it as a spare
@ht3oldnavyАй бұрын
SOB!!! I had a dewalt drill with a locking chuck this whole time!
@mikesworld60Ай бұрын
This is the way most of my projects go. I tried to put a simple pencil sharpener for my wife into the side of a particle board desk. The first cheap screw broke off when it was almost tight. I spent an hour looking through my hundreds of random screws I keep and finally found 3 screws that would work without having to drill out the holes in the sharpener body larger and that were not too long to go all the way out the other side of the cabinet. Two or Three hours later the sharpener was secured to the desks and ready to use. I had it for the day and spent the rest of the day eating and watching KZfaq.
@SkylarHillShopАй бұрын
LOL, so true! A perfectly good day foiled by one cheap screw. Have a good week Mike!