So the +2 carts go into the stock forks is there anything else needed other than seals?

I was able to get mine off without removing the exhaust. Used a ball end Allen and a box end wrench as a cheater bar to rotate and pop those bolts loose. Got them out by hand after that.

Did the +2 add a little more stability at high speeds? I want to do the legends +2 front end because right now with 13.5s on the back i feel a little squirrelly at high speeds. Maybe also add a GPR stabilizer

Where can i find that ignition switch and what did you use to cover up the oem switch spot in there?

Why is it so hard to rev up on these sound comps,you don't have a problem when you burn up a 300 dollar tire!😮

I have 11 on my street glide. I hate them. I bottom out n my back hurts so much I don't ride. I need to know how to adjust them once they are on.

Great freaking video! Subscribed!

Hey how dpes it works? Better a lot? I want to do the same

What mounts did you use? Struggling to find some for my old girl

Good hint about loading the shock before final adjustment. What I was looking for in the comments were a comparison of the drag specialty versus your other bike. I might be willing to buy the extra for Legends.

Fools really need a video on this?

Power loss?

What company did you go with for the defender bags?

Do u have the pump number to be able to just call and order by number?

Bad ass ✊🏽✊🏽✊🏽✊🏽

Cool! I just bought a Vulcan chain kit for my softail, it's good to know that someone has confidence in their product.

Intro song name ?

I installed the same throttle tube on my bike for an Lectron carb and is not working well, if I install the pulley part up to the friction pad (“cruise control”) the housing don’t close, if the pulley part start on the corner of the friction pad the slide of the carb don’t close… and if I put the friction pad out the throttle do close to 1/2 turn… so I made my own cable for the pulley part starts from the corner of the friction pad and now the slide do not open completely. 🫨🫨🫨

Thanks, had my lift for over 10 years and the p[ump just started to leak pressure a little. Was thinking I needed to get a new lift for $500, just ordered the pump, $72. Thanks bro, saved me sum buks. The lift is awesome, I don't know of much else nowdays that will operate for over 10 years and only cost you $72 in replacement parts. Shoot I even lift mt RZR on the lift. It leaves the wheels hanging over the edge for easy working. Superb lift, well worth every penny.

I got brown ones on my fxlr and I'm really diggin them. They feel amazing. Match the harley logo and lowrider rims.

Hello, is there a link to the helmet?

Sorry the spring on the side of the Hydraulic pump. The medal spring right on the side that works the hydraulic pump. Sorry to bother you. I can’t find it on any site

Can you please explain how you put the spring on the side of the pump. I have tried to put it on for 2 days and your video is hard to follow

When I bought a mower lift the pump broke just after the warranty ran out(30 days). I had to purchase a replacement and it cost 70% of the original purchase price.

Hi there , I bought this loft today . I noticed the rod connecting the hydraulic pump to the side is slightly curved . Not straight is that normal ? I can send you a picture here

Great video! I have a question, did you purchase those new bolts because you had to? Because I bought these shocks for my 03 dyna Superglide Sport and my existing bolts aren't long enough for these. The threads fit flush on the eyelids and don't have any threads to put the nut on

Will this setup work with abs ?

What size windshield did you put on it. ?

I love mine. Wouldn't ride without one. Enjoy

What size rotors do you have on there ? Will that set up work with the 11.8 ? Also where did ya pick up the bleeder bolts?

Ok guessing that must not have been the issue? I’ve heard a lot say it helped and the ones it did so far have found about issue causing there wobbles . I don’t have a big issues just around 90-100 on highway or back road just has a small shimmy . I just got mine installed . But I’ll have to wait to try out

What adapters do you use for the passenger pegs?

Was looking for a follow. Up video ? On how it helped . Yes/no?

Hoooo, I just noticed the video was 4yrs old. Thats a cool build, I think we will start to see more and more of these pre2013 baggers get pimped out as they get cheaper. Thanks for the inspiration! I just picked up a police SG 2006, ill be copying some of your work.

Ok ok slick trick with the heat gun !!!!! Well done sir

Nice video straight too the point, would habe like to see some of the actual work disassembly install and all that but over all nice

did you need to adjust the chain tension after the upgrade?

Old video but I just put a road rage pipe in my 96" bagger didn't care for the sound with the fiberglass packing so I removed it and put the baffle back in but the problem now is the tapered muffler tip makes it raspy on accel around 4k rpm and on decel like fishtail exhaust sorta. Did you have that issue?

i have used a variant of this product since 2005 and it makes an improvement in long fast sweepers you will get more vibration as bike is tighter 2002 flht

Can’t seem to get the endcap off was yours easy?

Been going on 2 years now the only issue I have with it is my Full to empty fuel digital part is never correct, goes all over the place up/down.

An whatever happend to this channel

Stupid question. I'm looking for a stock Ecm for my dyna. You sell yours?

Just use wd-40

Whhhhy don’t they make blue grips????😢

i love my 1200 sportster its the funnest bike ever!

Awesome video! I’m buying new dual disk fork lowers and tubes and wasn’t sure what parts I needed to make this work

I'm definitely going to install one. Every time I get at 100mph my front end starts to do that death wobble 😮, it stops when I lean forward on the tank and throttle down, but who wants to slow down 🤔. Those that say they don't know if it's working, don't notice BECAUSE IT'S WORKING! 😂 Everybody used them in the 70's. Those tiny triple tree shocks people buy today are a gimmick because they FORGOT about the fork brace. 😉👍

save the old one send it to get fix