Can you gold plate 4 aluminum car rims with the kit?
@MetalGearIV2 күн бұрын
hi man , i'm using nickel plating in hand tools in bath, but i'm facing problem of yellowish in place of wire which binds the product , ,can you help me out
@Rachelmcg19895 күн бұрын
Can uou electroplate gold onto copper without using nickel? Is there a nickel-free process for gold electroplating for jewelry?
@GoldPlatingServicesКүн бұрын
yes you can. You can plate gold onto copper without nickel. Nickel is recommended because it is a diffusion barrier which will help stop the copper from corroding under the gold.
@user-ex8fy7zn1s7 күн бұрын
THIS VIDEO US SOOO BLAND, U MIGHT KNOW WAT UR DOING BUT U NEED MOTIIN SPEED OR SOMETHING TOO DRAG,D OUT!!! U LOSE HALF YOUR VIEWERS!!😮
@user-fl8dy5if8s10 күн бұрын
When you watch television tell him to shut the fuk up😮😅😊😊😊😊😊
@getinthespace771515 күн бұрын
Interesting. I'm thinking about gold plating a 3D print to hold a hydrogen sensor to help seal the print from H2 sorption (atm pressure and temp). Probably still cheaper and faster lead time than a CNC stainless holder.
@agw542515 күн бұрын
And yet you got nothing next to the slip guard, I would not pay for such a sloppy job.
@andyyoung323316 күн бұрын
Hi guys I want to plate a watch any advice and what kit do I need? Andy UK,
@GoldPlatingServices14 күн бұрын
You could use a Universal plater which is brush plating which can be kind of tricky. We also have the Jewelmaster which is bath plating and that one is pretty easy because all you have to do is dip the watch into the soltion and rinse it off good between each step and you should have no problem.
@MakingBoost19 күн бұрын
Sorry didn’t realize this was USAmps direct. Of course you guys have an AC1000.😂
@grahamdwells19 күн бұрын
hello what chemical do/can I use for this? I would buy the one linked but it costs $95 for shipping to here.
@SophieMire-ek1fn23 күн бұрын
Where to buy the product? How much do you charge?😮
@GoldPlatingServices14 күн бұрын
You can find all that information on our website. www.goldplating.com/
@fstopPhotography23 күн бұрын
Very interest. Can it withstand buffing to a perfect mirror finish? This clearly looks like one of those videos where the kid made a video but doesn't have the intellectual prowess to answer them.
@GoldPlatingServices14 күн бұрын
No you can not buff the gold to a mirror finish. Because it is plated on so thin you will just take the gold right off the surface. We tell our customers that the surface you are plating will reflect in the gold plate. So if you have a dull surface your gold plate with be dull. If you have a mirror finish your gold will plate onto the surface with a mirror finish.
@MrJojothecoolАй бұрын
Does this work with the the normal universal plater ?
@GoldPlatingServices27 күн бұрын
Yes, you can add the Freestyle to the Universal.
@IcedoutjewleryАй бұрын
How much do u charge
@GoldPlatingServices14 күн бұрын
It depends on the item beause there are a lot of factors that come into play like, How thick you want the gold, If you want to use a different underplate, how much surface area you are plating, etc...
@Hardtops_vs_vertsАй бұрын
Can we get a business profit potential video
@tamanwin7278Ай бұрын
is there some kind of clear coat we can apply for gold plated to prevent the gold from getting rubbed off ?
@GoldPlatingServicesАй бұрын
You could add a clear coat to help protect the surface.
@tamanwin7278Ай бұрын
@@GoldPlatingServices Thank you very much, is there some kind of recommendation of what kind? I'm asking you because I assume you had a experience of a customer ask something like this before.
@FLATFOOTEDАй бұрын
Does your electro-clearmer solution work on stainless steel?
@GoldPlatingServicesАй бұрын
Yes, it will work on stainless steel.
@sarhanefrioua3527Ай бұрын
Hi Friend can i talking with you 😊 ?plz
@GoldPlatingServicesАй бұрын
You can contact us on our website
@manitamaharjan8604Ай бұрын
Can i use this process on copper statues ,sir?
@GoldPlatingServicesАй бұрын
Yes, you are able to use our solutions to plate onto copper.
@Zen_ModelingАй бұрын
If I’m only plating Brass with Nickel, can I use battery acid for my Surface prep ? Thanks, Lee
@GoldPlatingServicesАй бұрын
Not sure about that. We only recommend using our solutions. We do not know what the acid you use could do to your part or even your other solutions. You could test a sample piece but realize it could contaminate your other solutions or damage something. It's up to you if you want to try that.
@SDPickupsАй бұрын
I have no way to heat this product, can I use a microwave to heat it up before cleaning?
@GoldPlatingServicesАй бұрын
yes you could heat it up in a microwave or even in a pan but just make sure you are only using them dedicated for chemicals only and not also for cooking food.
@grahamdwells19 күн бұрын
you could boil water and then place the container of solution into a pan with the boiling water.
@mcin71Ай бұрын
Im new to this and just bought the cleaning solution. So the metal to be cleaned is hooked to negative and anode is hooked to positive is that right?
@GoldPlatingServicesАй бұрын
Yes, your anode should have the positive going through it and the negative should be connected to the item that needs to be Electro-cleaned.
@hennesro69Ай бұрын
wow even after 13 years your still responding to a few comments
@GoldPlatingServicesАй бұрын
Yup, making sure we are keeping up on stuff.
@WholelottashootinАй бұрын
Question: does this work on any metal ?
@GoldPlatingServicesАй бұрын
There is a few metals that our soultions can not plate onto. There is a list of metals that we know we can plate onto that we have on our website if you are interested.
@MAKRAMLAGH-cs2fjАй бұрын
Nice ❤
@Jay-fu1krАй бұрын
Thanks man !
@GoldPlatingServicesАй бұрын
Happy to help!
@FriendsPrideАй бұрын
how much gold consumed on this project?
@luisarredondo5744Ай бұрын
What is the bottom right green one???
@GoldPlatingServicesАй бұрын
Bright Nickel
@StormInDiDormEntertainmentАй бұрын
Whats the material of the filament used to make the initial bull?
@GoldPlatingServicesАй бұрын
We are not sure what filament. We just bought a 3D printed item.
@artistevivienАй бұрын
This is fascinating. Thank you for sharing!
@tseringwangyal547Ай бұрын
Where can i buybthis
@GoldPlatingServicesАй бұрын
It can be found here. www.goldplating.com/
@cr500_conversionsАй бұрын
What about aluminum automotive wheels? I have gold wheels that are powdercoated, but want to gold plate them, is that possible?
@GoldPlatingServicesАй бұрын
Aluminum can be plated onto but the chemicals used in the process cannot be used on a consumer level so its possible but you would need to get them nickel plated or something before you gold plate them.
@sweetrytchАй бұрын
how do you measure how much plated you put on earrings. for example if I wanna put 5 micron gold plated . how would I know its the right measurement?
@GoldPlatingServicesАй бұрын
You would have to get it tested to see how much gold is plated onto an item. So you would have to do the calculations to see how long it would take and at what voltage/current you have to plate at to get 5 microns onto an item. Then you would have it tested to see if 5 microns actually plated onto your item then you could plate the rest once you know.
@curly__3Ай бұрын
Awesome! Thanks! How durable is it? For instance, can you run fine steel wool over it without any real damage?
@GoldPlatingServicesАй бұрын
Anything more abrasive than a polishing cloth will scratch and potentially remove the gold plate.
@BabarZammanАй бұрын
How can i buy this machine
@GoldPlatingServicesАй бұрын
It is on our website (www.goldplating.com/)
@03hVc012 ай бұрын
Your set up looks like a production facility. 👍
@GoldPlatingServicesАй бұрын
Yes it does. We have a lot of tanks set up to gold plate stuff.
@03hVc01Ай бұрын
Very nice! Keep up the good work
@GoldPlatingServicesАй бұрын
Thanks!
@coxwagan2 ай бұрын
I own this very Hub Cap . Identical (where can I get them Gold plated)??? and what is the average cost for four chrome plastic. Hub cap . I want the very same look you have the 24 karat look
@Zen_Modeling2 ай бұрын
I just purchased several of your Products. Your website is INCREDIBLE! All the Content KZfaq videos are Incredible! I’ve been doing my homework to start Nickel Plating very small 1:25 scale Brass auto parts that I machine on a mill or lathe. I’m looking forward to testing soon. I hope you guys monitor your questions left here, as I know I will most likely have several 🔜. Keep up the Stellar Online Content💯 Respectfully. Lee aka: ZenModeling
@GoldPlatingServices2 ай бұрын
Thank you! Good luck on your plating job. I agree we do have a lot of helpful information on our KZfaq and website. If you need some support we have a support number on our website if you would like to talk to us on the phone.
@Zen_ModelingАй бұрын
@@GoldPlatingServices I will definitely take you up on that! I’ve heard great reviews from folks that have spoken to you guys regarding technical info & help with troubleshooting issues they are having with their process..💯 Thank-U-Very-Much!!!! 👏👏👏 Lee aka: ☯️ZenModeling
@RabiulAwalRobi-dl6qj2 ай бұрын
Price and gurentee
@jagdishkarmokar85402 ай бұрын
Vare Nice
@GoldPlatingServices2 ай бұрын
Yes, indeed very nice.
@nathanielgarrick59112 ай бұрын
What do u dip it in?
@GoldPlatingServices2 ай бұрын
It is being dipped into 3 different chemicals. The first one being Electro-clean. The second one being TriVal 24K Acid Gold Strike. The third one being Bright 24K Gold.
@gaulix692 ай бұрын
thank for all your tips videos, very useful ! I have One question I copper plate steel parts before nickel plating. I use and alkaline and an acid copper plating solution. I obtain a smooth fine grain and leveled copper layer, but I can't get bright. I use: 200g/L CuSO4 and 65g/L 98% H2SO4. 0,5g/L of Sodium Lauryl Sulfate dish soap (as a ionic surfactant/wetting agent) 0,5g/L of SDBS laundry (as a anionic wetting agent) 1g/L of urea (as leveling agent) 0,5g/L of PEG (as a brightner agent) 0,15g/L NaCl (90ppm) so, it need a little buff of my copper plating with scotch britte and buffing compound. but I have try to cathodic electrocleaning my copper plated part before nickel-plating, and I had see that the electroclean can remove the copper plating... I make my own Electroclean solution : 80g/L NaCO3 40g/L NaOH 50g/L NaCitrate (complexing agent) 15g/L DBS 5g/L SLS Do you think is it possible to safely electroclean copper plated parts? I think I had use to much current (the same as non plated part), and maybe my solution is too strongly alkaline? or is it the hydrogen bubbles that inevitably strip of the plating?
@GoldPlatingServices2 ай бұрын
We electro-clean our copper strike parts all the time and they are fine. It could be that you electro-clean is too concentrated. Try a new smaller bath of electro-clean at 5V and see if that works.
@MichaelMiles-nb4qc2 ай бұрын
How long is quite some time?
@GoldPlatingServices2 ай бұрын
10 minutes or more
@giovannicortez29332 ай бұрын
Is there a cpurse i can take to gain confidence in this?
@GoldPlatingServices2 ай бұрын
We do not offer courses on plating.
@BIGGBULLxxx2 ай бұрын
Hi i have a 16mm x 25.5 silver Miami Cuban Link necklace and a 16mm x 8.25 Cuban Link bracelet silver. How much will it cost me to get it heavily dipped in rhodium for both pieces to a very very bright mirror finish shine. Thanks
@GoldPlatingServices2 ай бұрын
You would have to get a quote off of our website to get a cost.
why cant u use a soldering gun and flux and copper braid to remove the sloder other than a dremil?
@GoldPlatingServices2 ай бұрын
You could but then you risk contaminating the contact even more with solder. This process is to restore the circuit board so gold plating it is part of the process.
@user-wr3qo3jz7x2 ай бұрын
Good work.
@knightwolf2006122 ай бұрын
Why not 'strip' complete hubcap first, then 'activate' complete hubcap, then 'gold plate' complete hubcap? Then you don't have to worry about sections, interference, no constantly switch material, etc. Or does it take too much fime in the air and does it get oxidated then or something? And why 'strip' the chrome itself first anyway? Doesn't stick the gold to it?
@GoldPlatingServices2 ай бұрын
We do it in sections because we don't want the part to dry out because it won't plate properly if it is dried and we move on to the next steps in the process. Gold does not plate onto chrome.