👍

Alguém poderia me dizer como reseto a minha river pro 2?

I just replaced this exact same water inlet valve and paid $23 for it in Amazon. You paid $135?😮

Are these digital air chucks with gauge repairable,I have the K Tool International that I have been using for some time now and recently I noticed that when I use it to inflate tires,the digits just stay in 00,it does not show the gauge again. Is it possible to diagonose and fix the issue.Anybody that knows should please help.

Great video thanks

Mine did the same thing 3 weeks ago. I was using AC pass through and poof. I'm really regretting buy this with the two EB's and 2000 watts of solar. Bloody POS.

I have an 05 Mitsubishi Lancer that I am having to do this exact repair on so thank you so much for posting this video because nobody else has. 💜

Good replacement illustration of the part. I discovered today that I have the exact issue with the exact part. I'll be ordering the part to replace and watching your video, should be easy as 1,2,3... Thanks for sharing.

Thank you

Just wanted to tell you your effort into this video was not in vain. It should be nominated for recognition. I saw many on here but yours is the only one with substance with weight. Thank you. I just bought mine used from a private owner and can't wait to use it like a kid with a toy on Christmas

Lower the jack off the knuckle just slightly to give you a little play on the 3/4 nuts

IT IS TOO EASY TO SNAP THE FUNNEL OFF THE TUBE. REPLACEMENT FUNNELS ARE NOT AVAILABLE SO YOU WILL HAVE TO BUY ANOTHER TANK. PAY A LITTLE MORE FOR ONE WITH A METAL FUNNEL.

Do we need a licencese electrician to install this ? Do we need a permit and inspection ?

Thank you, very helpful!

I have the same one and when it’s full, how do you plug the top up? Did yours come with a cap where the funnel goes in.

I know this is an old video, and you may not even have this cabinet anymore. The question I have is the drain plug in the bottom, that's used to drain the media from the cabinet. I know you said it is a 15mm head, but what's the diameter of the plug? The reason i ask is I have this cabinet on order but will be making a metering valve in the bottom to help the media flow better. Thanks.

And where did you get the part I'm having a problem finding one

Awesome explanation can’t wait to install mine

Looks I am not the only one with ecoflow issues

Great job bud. Awesome settup. I just ordered the b20 model today, just waiting for it to arrive. Would love to have your model, but didnt have the room... I see alot of people talking about using cailk/silicone. I know the corners are a defi te area you want to do, but did you also go along every seem? Just want to make sure i seal it up really well. .. Excellent job on the video.

My Dodge caravan does not have the little hole to drop despair. I wanted to find out how you dropped the spare and you did not show me how to drop the spare.

nice- i have the exact same one. have never maintained it well so just found you. will start...thanks!

Me sucede lo mismo y es ka 2da vez, la 1ra ne dieron una nueva y e decidido mejor expandir mi sistema solar y no comprar baterías o plantas digitales. Si l9gra hacer algo, mantenganos al tanto, gracias por su tiempo😊

A power surge is needed for those types of internal power supply. When using generators, you need a sinewave. There is no protection on the ground when a surge happens.

Excellent and thorough review! You just won a lifetime subscriber with me. I cant wait to go into your other videos after this one and see what you have.

What the size of the green hose? Mine is leaking thru the connector before the water inlet. Is that just a connector extension or its anything else?

Thank you for your video. I have a brand-new Delta Pro. I haven't even used it. I have only charged it. We haven't had any storms, and I don't know of any power outages. My unit is experiencing the same issues you are having in this video. I emailed Ecoflow support. Hopefully, all goes well.

My leaks where the filter is

You don't know how much you helped me

great vid thanks for the help

You failed you didn't show us how to take the spare tire off of the car crappy video

Thank you, worked perfectly, great video!

Have you had issues with the carbon sensor?

cool upgrades, will buy the heater and the brush connector

Thank you so much! After watching your video I realize it's an easy job and feel confident I can do! Can I have the exact same fridge with the exact same part that went bad.

Do you know how they make the wheels for the creeper instead of buy new ones because the rollers are good not the studs. Can't figure out how they put that stud in there.

Thanks for the video. Its been 6 years, but can you recall if it came with an elbow for the dust extraction port? What size is the port with gromet? Cheers!

The fact that you're a Christian just seals it for me. Mister, you are one amazing man. I got a Predator 9000 and followed your "upgrades" with the exception of the power failure alarm. I need to get one of those. Your review and "upgrades" made me bite the bullet and just do it. Even on sale, this thing's not cheap. If you live direct deposit-to-direct deposit like me, well, it takes a lot of savings to make this work. Keep doing what you're doing. PLEASE. Just invest in a lapel mic so we can hear you better, that's about it! Big fan from Florida! (see why I need the generator?)

Can this be hooked up to air at gas station?

Great post!!!! Explaining it so the average person can understand. Thanks for sharing

Hello I also have a delta pro 3600 . My problem is 50w overload from a fan running . the reset button does not work either , we heard cracking smelt fire and shut it down . This unit is only one years old .I paid over 8,000 w extra battery and solar panel I never used. Delta pro is terrible. So don’t expect help. I have a two year warranty and they are saying it was only a year, when selling they promote a good bunch of boloney and then when you need them they don’t hear you.. I now have no use for this extra battery that cost ,3,000 and a solar panel that was another thousand don’t have bill in front of me could have been more. I don’t know nothing about this unit I am looking for I guess electrician to fix this hopefully then sell it. , hoping to get some money back on the unit, Like I said they talked a good one , but your problem sound like mine only mine is flashing red saying overflow circuit 50 w , This should not have happened if this unit runs a whole house AC very disappointed . .if I find any information out I will let you know ,but to any buyers out there don’t buy if this company can not stand behind their product

Awesome! Thanks for doing this! Exactly what I needed too. I wasn't sure how to disconnect the lines and didn't want to pull too hard. Subscribed!

I just had the same problem. Except I was just powering several regular a/c devices. I got a 60 hz error and overload error. I have not been able to get it to go away. A/c outlets won’t work.

The engine is running rich, not lean on load by that spark plug, which makes sense. Putting a longer adapter on the carburetor is like sucking through a straw. Its essentially choking the motor. You can just adjust the AF screw and lean it out a bit. Its really expected.

Same exact thing happened to me there first time I tried to charge on AC while connected to transfer panel. Garbage.

We have used the kzfaq.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

Thank you for the video. Please include your refrigerator brand / model in the description as well as the part number. I happened to be lucky and spot your video. The part looks the same as my WPW10159839 and the fridge looks the same as my Kenmore Elite 106.57796701, just a different color. Water and ice dispenser look exactly like that. I'm just including the info in the comment in case it helps someone else spot your video. My issue is the ice dispenser is overfilling a little bit recently and dripping water from the ice dispenser. From what I've seen, a bad seal inside this valve may be the cause, so wish me a little more luck that this valve is all I needed to fix this. The rubber seal inside can breakdown with age.

Insightful. Thanks

Thank you!

Awww man, you should do the freeze plugs in there too, just in case...