thank you I thought I was the only manchild that is trying to learn how to solder to fix all his broken saber cores its helped heaps appreciate it. it's still daunting hut the more i do it and get tips and tricks on how, the easier it seems...thanks man.
@Jose-jv4peАй бұрын
Hey I love the font! But I tried to access it through your link and my computer keeps saying the file is empty. Could I get any help with this at all or is it because it's been a long time since the video was uploaded?
@cbrsawyerАй бұрын
Apoligies. This is one of the first fonts I made, and the link is old. Here's an updated one, but please bear in mind that this was one of my first attempts to create a font. drive.google.com/drive/folders/1feraRQ_M1Kam2nNsXvSaVmUMpRBPv38w?usp=sharing
@xaikkenАй бұрын
Awesome video man thank you
@gregorynovikov1450Ай бұрын
Melt and drag effect ?
@cbrsawyerАй бұрын
Yes, proffie will do that if that’s what you’re asking.
@Mattymew2 ай бұрын
You mentioned you use a 28mm aliexpress speaker in some cases. Do you have a link for that? And how does it compare to the SO elite snd dark?
@cbrsawyer2 ай бұрын
I haven’t done a side-by-side comparison, but my ear thinks they’re very close. To the Dark at least. They’re all I’m using atm (4 Ohm). Link: a.aliexpress.com/_mOBNY5e
@Mattymew2 ай бұрын
@@cbrsawyer Thanks man, I've ordered them. I'm already fantasizing about a 32mm lol. Gotta find a larger cheap hilt that can handle that. Even tho it shouldn't ;)
@cbrsawyer2 ай бұрын
Overkill is underrated. 😎
@MattymewАй бұрын
@cbrsawyer I haven't even gotten them and I've just ordered a 32mm speaker with a lower frequency response down to 150hz. I'm likely going to 3D model my own design and have it tube-lasered, so will work it in somewhere.
@cbrsawyerАй бұрын
*aural drooling
@MerlinOfAtlantis2 ай бұрын
me when i drink the magic potion that turns me into santa on christmas
@bluebomber812 ай бұрын
That's pretty cool. Gonna have to grab that 'chosen one' soundfont eventually cause that'd work great with this.
@gavintor2 ай бұрын
awesome stuff! other than soldering the wire was there any work you needed to do for the bigger speaker to work? I have an older saber that I'm putting an xeno3 rgb into and I'll probably be using the older speaker as it's bigger and fits the current chasis in the hilt. Thanks for any info!
@cbrsawyer2 ай бұрын
I made a how-to vid as well. Although I have refined the method a bit now. Lol kzfaq.info/get/bejne/hdOTosyJ19-bdY0.htmlsi=0-LZiNVvfTICkoAG
@gavintor2 ай бұрын
@@cbrsawyer thank you!
@nitthegrit75442 ай бұрын
You mind sharing your stylecode with me?
@cbrsawyer2 ай бұрын
Of course not: pastebin.com/Tfxkfhsd
@nitthegrit75442 ай бұрын
Oh, I can think of some really good quotes of his that would be awesome transitions. Nice work on this, one, Jason!
@mbart51132 ай бұрын
Santa Jack Skellington and Good Old Kris Kringle/Santa Claus: HO-HO-HO-HO! HO-HO-HO! HA-HA-HA-HA-HO! HAPPY HALLOWEEN AND MERRY CHRISTMAS WITHIN TIM BURTON’S THE NIGHTMARE BEFORE CHRISTMAS! TIM BURTON’S THE NIGHTMARE BEFORE CHRISTMAS IS SO BETTER THAN ALADDIN AND ALADDIN 2: THE RETURN OF JAFAR AND DISNEY’S ALADDIN: (TV SERIES) AND ALADDIN 3: ALADDIN AND THE KING OF THIEVES AND THE TIM ALLEN THE SANTA CLAUSE VIDEO COLLECTION!
@FallnPadawan2 ай бұрын
Where can I find This soundfont and the saber
@cbrsawyer2 ай бұрын
The font: jaydalorian.com/sounds/decimate-free-link-in-the-description/ And the saber is a Sabertrio Vektra with proffie.
@galef_sabers_n_more3 ай бұрын
Good lookin set of sabers! LGT is my go-to for sabers. So customizable, so affordable. I have yet to see another manufacturer come close. I think the most important thing is to find a reliable vendor, like Darkwolf, Vire sabers or Crimson Dawn.
@cbrsawyer3 ай бұрын
Agreed, sir. A good vendor is paramount. Wish there was a way to warn all newcomers about all these shady pop-ups.
@bluebomber814 ай бұрын
Feel like I'm gonna stay mostly around LGT myself as my Saberforge venture is off to a ripping start. After 3 weeks it finally got to me, the emitter and handle section will not separate. We are being charged a lot for some aluminum tubes, I don't think it's a lot to expect that the quality is there and things like this aren't the norm. Even LGT could step it up in a lot of ways.
@cbrsawyer4 ай бұрын
I like the LGTs because I can set it up pretty much exactly like I want. And they’re cheap! Lol
@bluebomber814 ай бұрын
@@cbrsawyer yea, the only thing keeping them from being completely ideal for me is the pommels and connectors for staffs. The staff being a bigger issue cause that's two speakers and everything I see is very mild venting. Ugh.
@tylorlayfield68624 ай бұрын
Just now seeing this but I actually bought my first sabers last week. First font I made was SpongeBob 😂 I used the captain singing “Ooooooohhhhhhhhhhh” as the hum and the squishy boot steps for clash. Hooplah is blaster deflect. Smooth swing is his laugh. And I added 3 music tracks you can play behind everything else. Love yours more for sure though lol
@cbrsawyer4 ай бұрын
Welcome to the hobby! And the more fonts the better!
@bluebomber814 ай бұрын
Need to get my saberforge hilt so I can load it up with all the fun lights and sounds, lol. Hope that comes ok cause if I can get cheap proffie cores it helps offset how expensive some of their hilts are. Like the Conan flame blade would look sick with their knight errant hilts, but they charge 150, yeowch. 😢
@cbrsawyer4 ай бұрын
That’s why I started installing myself. Much cheaper that way. And I’m a cheap bastard. Lol
@bluebomber814 ай бұрын
@@cbrsawyer yea, gonna have to go that route eventually. Cool sabers at a good price if you build it. But there's a new shop on Ali with lgt proffie cores for 45. So now you can do those builds for less, too. I hope this trends and we can get stuff for less, especially blades. But I'm getting stuff to make those too, lol.
@cbrsawyer4 ай бұрын
@@bluebomber81 I’ve got it down to where I can build an LGT proffie with a blade for less than $300 now. Could probably even do it with a 3.9.
@cbrsawyer4 ай бұрын
@@bluebomber81 I just buy all the components (board, switch, LGT chassis, even LED PCBs) separately and put them together.
@bluebomber814 ай бұрын
@@cbrsawyerI keep trying to reply but yt keeps eating it. There's a seller with the 2.2 cores for 45, fully assembled and new. Apparently if I say where this website is deleting it.
@Apepisaniceguy4 ай бұрын
Will a LGT core fit in the progeny?
@cbrsawyer4 ай бұрын
Unfortunately, no. This one is designed for a bigger chassis.
@benoduartebd4 ай бұрын
Amazing.👍 I knew there had to be one of these
@bluebomber814 ай бұрын
At least they made it right. May come around to them, cause they do have some cool stuff. I like the stuff that fits LGT cores. Saw that Bastion Eco hilt.. the pommel on that might be rather ideal. Looks like venting all around it. Maybe only downside is no easy battery access, but oh well. Looks like it might be a fun one to move around, too. 🤔
@cbrsawyer4 ай бұрын
I’m obvs worried these grips won’t hold up, but, yeah, they made it right. I’m gonna have to figure out this install, though. Not my strong point so far. Lol All their apprentice hilts were <$50 for empties, though. That’s a deal.
@bluebomber814 ай бұрын
@@cbrsawyer am sure I'll get to doing a full build eventually, but just went for that Bastion Eco, lol. As long as I can use the speakers I've been using in my LGTs, and I feel like I can, that thing should be a beast. Feel like I need a bit more zen before trying a build like that, tho it probably starts feeling easier as you go.
@cbrsawyer4 ай бұрын
Trial and error for me. And error and error… 🤣
@Van_Crane4 ай бұрын
Ah dude that's sick. I'm gonna order my saberforge malice in June
@cbrsawyer4 ай бұрын
Nice. What board you going with? Or installing?
@Van_Crane4 ай бұрын
@@cbrsawyer mines gonna get pixel premium. Using it for a cosplay
@LegacyVision.5 ай бұрын
Ty, S3 are offering Elite and Dark now
@cbrsawyer5 ай бұрын
Yep. Good times. Lol
@GrayPaladin5 ай бұрын
That's cool😅
@BK-Kizzle5 ай бұрын
Damn....I drilled holes in my end pommel of my Bendu. You took it up a notch and looped that sucker right off, lol
@cbrsawyer5 ай бұрын
The Dremel is your friend.
@bluebomber815 ай бұрын
I feel like the carbon fiber would shine for a double-bladed setup, tho the whole thing is probably chonkier than I'd like for that. But already the aluminum hilts aren't enough to balance well with pixel blades, so lighter isn't the way to go for single. Do like the idea of a setup where you can add weight and such. Be nice to actually see that work more ideally than this.
@cbrsawyer5 ай бұрын
Most people don’t seem to care much about balance, but it gets on my nerves for a “lightsaber” to be weighted toward the blade too much.
@bluebomber815 ай бұрын
@@cbrsawyer yea, that's why I'm using baselits a majority of the time. They just feel better. Glad the XRGBs don't suck. With better speakers anyways. But even that hilt I had to extend a bit for balance, and the proffie a deal more. I know they can make hilts heavier, just not sure if they can do blades lighter. 🤔
@cbrsawyer5 ай бұрын
@@bluebomber81 All I use now are 7/8. Not as light as baselit, but close enough.
@bluebomber815 ай бұрын
@@cbrsawyer ah, yea. That is on my list of things to try. See if I can get something better balanced at a more reasonable size. I do like my beast as is but don't want all my sabers to be so long, lol.
@bluebomber815 ай бұрын
That's some BS. They seem to have some cool stuff but I guess there's a reason they have a reputation they can't shake.
@cbrsawyer5 ай бұрын
Sad but true. Can’t say I wasn’t warned.
@bluebomber815 ай бұрын
@@cbrsawyer yea, hard not to be tempted tho. It's a crapload of really unique stuff you kinda want to hope for the best, lol.
@bluebomber815 ай бұрын
Looks nice. Cool straightforward design. I'd have to fiddle with the sound. Looking forward to an era where it's understood some people want refinements for better sound, not hidden vents and all. 👍
@cbrsawyer5 ай бұрын
Yeah, it’s not ideal. But it should have been!
@babouille4445 ай бұрын
nice tube
@meaty_smurf5 ай бұрын
It demands a 3.9. Anything less would be uncivilized.
@cbrsawyer5 ай бұрын
But all those poor, neglected, multi-colored 2.2s…
@meaty_smurf5 ай бұрын
@@cbrsawyer ...will have to spend their lives wishing they were 3.9s.
@darthparadigmsilluminatedb14615 ай бұрын
The Imperial saber design doesn't seem to get the love that it deserves, but it's always been a favorite of mine. Looking forward to seeing the finished build... have fun!
@cbrsawyer5 ай бұрын
Simple, elegant, functional. I am a fan so far. I bet it will Obi-Ani like a dream.
@CornerstoneWorshipTutorials5 ай бұрын
Do you have the link?
@cbrsawyer5 ай бұрын
Not a current one, no. Search TXQ lightsaber on AliExpress.
@CornerstoneWorshipTutorials5 ай бұрын
@@cbrsawyer Thank you! There's hundreds of them, though...
@cbrsawyer5 ай бұрын
Yeah, but that’s a good thing! I looked and didn’t see the exact model from this video, so it’s possible they don’t offer it anymore.
@CornerstoneWorshipTutorials5 ай бұрын
@@cbrsawyer Got it; thanks for your help!
@cbrsawyer5 ай бұрын
@@CornerstoneWorshipTutorials Hey, look what I found: Just found this amazing item on AliExpress. Check it out! $59.00 41% Off | TXQSABER Heavy Dueling Lightsaber Metal Hilt 1 inch Blade 12 Color 10 Fonts Bright Loud Changing with Blaster FOC Laser Sword a.aliexpress.com/_m0vtVO2
@qwertyuiopa6735 ай бұрын
Excellent.
@lydiaaustin28285 ай бұрын
We listen to this all the time! My 18 month old grandson loves it!
@cbrsawyer5 ай бұрын
Ha! That makes me happy. Thank you for sharing!
@user-po7oj3zd6t6 ай бұрын
is this free and if so where can i get this
@cbrsawyer6 ай бұрын
Yeah, it’s free. Here’s the link: tinyurl.com/beavisnbuttheadwbmn The rest of our free fonts are here: youtube.com/@wetbubsmeatynubs1299?si=JOCokUFro4XPe8yu
@WhiteOnlyPies6 ай бұрын
@@cbrsawyerthanks brother
@bluebomber816 ай бұрын
Interesting. Didn't even know proffie used the slsh files. Could be useful if I ever make and finish a font, lol.
@cbrsawyer6 ай бұрын
Right? They obvs don’t work well in every font, but they have their uses I think. There’s a subtle sword slsh (subtle as in I need to pulp the volume up) in the Conan font.
@Alex.Burg046 ай бұрын
can you provide a link to that font? that sounds awesome!
@cbrsawyer6 ай бұрын
Oops. My bad. Certainly. tinyurl.com/y3hk8nvw
@michaelcarlton84396 ай бұрын
Hey again! Quick question, is it bad to copy and paste a video into 4k that you are not able to save to a playlist? Thinking about songs from SpongeBob and avatar the last airbender. Also, this video was extremely helpful it helping me edit things in audacity! Thank you
@cbrsawyer6 ай бұрын
You mean because copyright or what? I don’t worry about it because I’m using the clips for fan-made stuff that I don’t charge for if that’s what you mean. Shouldn’t be an issue. Besides, you’ve got all these font makers including quotes they ripped from whatever source. They’ll go after them if anything. Other than that, I’m not sure what you could mean. And glad the video helped!
@michaelcarlton84396 ай бұрын
@@cbrsawyer yea that’s what I thought too. Sorry for the confusion but thank you for replying 😊😁
@cbrsawyer6 ай бұрын
You bet man. I’ll talk about saber stuff all day long. Hope you’re having a blast with it all.
@scarepro6 ай бұрын
Hey brother- I'd like to talk to you about commissioning another chainsaw font or two, if you're interested. I have a prop with audio that I'll be selling, needs exactly this, pretty much
@cbrsawyer6 ай бұрын
Hit me up on Messenger. facebook.com/cbrsawyer?mibextid=JRoKGi
@BlackDragon_N0016 ай бұрын
I'm looking for where to get this font, the download link is empty...
@cbrsawyer6 ай бұрын
Apologies, that's an old link. JP is one of my first attempts at making a font, so please don't hold it against me. I've been meaning to go back and rework it, but I haven't gotten around to it yet. Try this link: www.dropbox.com/scl/fo/s3hik1zwvtxxhln4p4tto/h?rlkey=3ay95hgesrclqmbzgg2q02ksr&dl=0