Do the stock intake springs have more coils at the bottom? My springs got all mixed up and springs have no colors to identify intake from exhaust. HELP!

Well made, the remove first was a good one.

8th gen SI gang!!

What socket wrench are you using? I wanna get one.

That model doesn't exist for sale anymore in 2024 according to your link in the description..

Finally a great video on intake install

VHT doesn’t work, use cerakote

What can I use for the rust ?

Those valves look brilliant, but personally I won't be 800 grit sanding my valve stems because those clearances are precision engineered and once they're out of spec you need new valves altogether, otherwise you don't have the appropriate film of oil in-between. Maybe if I'm coating them and I need to slim them down first, I might.

What grit

What color of the spray paint sir? Its silver or aluminum color?

Nicely done and presented well done 👏

I average 4.5 years with 55 watt ballasts and cheap ebay bulbs. That's on par with led.

im going rv6 catted dp and invidia n1 exhaust how do I tune them with my hondata?

What grit polish did you use? What grit cutter did you use?

Possible to control air to fuel ratio? I just changed cats but left the 3rd one off (filter) on a 8th Gen 09 ExL accord. CEL indicates catalytic inefficiency but no longer po268 and stuff like that.

Best DIY I’ve seen in a while

Does painting the headers keep heat down or have to go titanium wrap?

Who makes the black upper strut tower brace?

Don’t you have to jack up the lower control arm a little bit before you tighten it ?

So I installed these same coilovers about a year ago, changing my tire size so I'm adjusting the rear set up...My passenger side shock body won't turn either way, everything works as it should on the driver side set up though. Any recommendations?

Thanks Dude good advice eventhough your Video is nearly 10 Years old its still Amazing.

Nobody wants to talk about map number 2?😂😂😂😂

Just purchased a car with coilovers, your explanation was easy to understand and very helpful! Great Video!

Hey bro where to buy this hondata flashpro ?

great job young man.

Hey @milanmastracci - Question in regards to adjusting the rear divorced setup, so after changing the spring for ride height, I see some people undo the bottom bolt that holds the shock and spin it that way to align it with the control arm hole again, whereas you just undid the collar and spun it whilst it's bolted on. Do both ways achieve the same thing? I am thinking your way is much easier and no need to re-bolt things.

Great video, absolutely everything I wanted to know.

This build never happened. No updates.

Thank you so much Milan for the awesome instructional video. I got mine installed today on my 2017 370Z Nismo what a differenced. Greetings from Illinois.

I did the same thing but im able to scrape the paint off with my fingernail.

This was the best video on the topic so far thanks a ton

Adjust the valves while it’s open

I would like to purchase some wheel spacers from my 2018 jaguar.F type base says 18th.Where can I purchase a map

Thanks for making it easy!

I assume row 27 and 29 were meant to be intake valve guides and exhaust valve guides not intake intake

I would be concerned with Mishimoto's placement of the AC condenser core in front of the radiator, causing the heat dissipated by the condenser to raise the temperature of the air flowing over the fins of the radiator and thus reducing the radiator's ability to reject heat to the air. Would it be possible to reverse the placement of the condenser so that it would be downstream of the radiator?

What is the max vtc for those drag cartel 3.2 cams on your setup ?

Thanks pal...top man

Do you happen to know the torque spec's? I'm doing a similar job on my Passat.

Do the front coilover’s preload have to be adjusted or reset after adjusting or changing ride height? Like you would do with the rear divorced setup.. I recently swapped wheels on my coupe- and would like to lower it, but I’m wondering since I’ve already set the preload if I can just lower it.

Infrared thermometers are apparently not that accurate in measuring tyre temperatures. You need to have the probe that checks the internal tyre temperature and unfortunately they are generally a little more expensive…

thank you brother

Waiting for more content 😌

Thank you for the info

I just did headers on my car. I’ve been noticing hissing noises at times. Idk if it’s just air or some kinda leak. Does anyone know?

🎉🎉🎉 this video was a major help

Your smoking some really good crack of you think that is worth $750

Excellent job and video...none better.

The invidia cat back pipes have too many hard angles and it makes you lose potential power. Get either a single exit or straight dual like ark grip cat back exhaust