How can i make it louder? Its really quite

Your the only one who actually showed "how" to click it back in during re-assembling everyone else skipped it and made it look easy. Thank you for also struggling with it! You really have to crush that last clip in, felt like I was breaking the left/right clicks until it finally clicked.

You are a life saver my friend! Thank you!!

ok this worked! but it def takes some adjusting. I used a tape that needed 3 layers for the left and I added 2 for the right. Still iffy, so I might test it and open it back up. but this made this less scary. I might use less textured tape next time I open it up. Thanks!

Thanks for this video. I'll apply same fix when I get home. Hopefully, it works. 👍🏾

your video saved my money. THANKS BRO!

Thanks a bunch! In my case a TSA agent accidentally dropped my mouse when searching through my backpack and all the buttons on the side of the mouse stopped working for me. After seeing your video I immediately got the suspicion that it was the white flat cable connecting the side to the main board getting loose and after disassembling, that was exactly the case. After reconnecting the cable, all my side-buttons work again :) If anyone's also in this position, just lift up the tiny white piece of plastic on the top of the cable socket, put the cable in and push down the plastic to tighten the connection again. This is a pretty standard flat-cable (or ribbon cable) socket mechanism, if you need to google that :)

Mais um gago! 🤦🏻

As always !! a soul saver !!! Big bThank you!

thank you man it fixed my mouse for now ))

Thank you!!! Was going crazy thinking my drivers were malfunctioning. Used tape and it's more sensitive but fully works again without disengaging. Tried plastic at first but it held the button down too much and wouldn't disengage. Hopefully it lasts for a while it's not a cheap mouse!

Hi sir do you know if dodge charger 2011 6 cyl 3.6 engine use the same clips?

Most painful 2 minutes of my life

Cannot understand

Thank you for doing the Video 📹 for others

Thanks

Thanks for that mate.. Very helpful

Is this monitor's screen type LED? or LCD?

Sooooo you cannot reload it without a speed loader

In my case it was enough to disassemble and clean the internals. But it's sad. This is a really great mouse for not to mention really expensive and I have not even had this for 2 years before issues begins. In comparison I also have a very cheap M180 from Logitech that have been working painlessly for more than a decade. I also have a friend with an MX Master 2 that needs to use Bluetooth because the wireless receiver just stopped working.

There are already so many thank you in the comments one more won’t hurt. Man you helped me very much, I was scared I just replaced my battery at -20*C so I was already freezing, then I see my window not going up… I thought I had broken something in the process… thanks again bro😉

This worked for me! i used the tape as the video says but it was sticky and not responding well, i used doublesided tape and two pieces of plastic from a chapstick packaging and its been great!

Okay, only the main thing was missing, how to peel of the stickers?

Thanks for this video! This left click has been bugging me for so many days and finally tried adding some padding to the left click. As food as new now. It's been just 1 month past warranty :(. It's bad this problem exists and for a mouse that's considered one of the best

I just opened mine I didn't need to use a bit of extra cushion or anything it was stuck so I blew on the right button and it cleared the problem. What you need is an air blower cleaner for some mouse button stuck issues. Don't open the mouse sometimes just blow on the button and blow into it😮 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

Great vid very helpful bruh ⭐⭐⭐⭐⭐

Thank you! This fixed my problem!

Thanks! Unfortunately I had to break the front screw as I don't have a star adapter so small. But it works well now

can you use the power suply from the laptop to power the docking?

I encountered the same issue with my mouse ( Logitech Logi MX Master 3) and attempted the same procedure multiple times without any positive results. Initially, I used only tape, but later I switched to a hard plastic surface-similar to the ones that come with batteries or USB cards. My hypothesis was that the button pressure needed to be flat and consistent across the entire surface. After clicking around 50 times, it still works well. Can't predict tomorrow, but this has been my positive experience. Thanks to this amazing video!

thank you it worked

I have a similar issue. Specially for select and drag. Will give it a go as it was clearly explained and seems easy to do. Thanks for sharing 👍🏼

How's it holding up?

watching this made me sea sick.... keep still!!!

Uh uh uh cable uh uh uh WOW I COULDN'T TAKE IT A QUARTER THROUGH THE VIDEO I HAD TO CHANGE IT LOL ANNOYING

Thanks man.

amazing video worked perfectly on my 2009 g37👍🏼

Just the fix i was looking for, my right click has died a little from playing LOL xD

Thanks man you are amazing

U fckn talk a lot lol

Awesome! Thanks for that tip about the tape

I tried to install a remote cutoff switch but this window function made it impractical. Thanks for this tutorial - I was super anxious when my windows were acting up after the install.

Where did you buy it from I need one it’s called the rocker panel

Thank you sir mine is now fixed and mine is the MX Master 3S

What size is the torque bit?

I know it's been 6 years since this video was originally posted, but do you have any comment on how much the deflector improves wind noise while driving?

That is not a rocket panel that is the panel cover

Thank you

I just wanted thank you so much. Instrucion we're very helpful and easy to follow