@@ElReySupr3me Its on and looking awesome on my 39,000 mile 2001 CR-V. Thanks!
@mvngo26033 ай бұрын
Sell your crv yet. How much for the yonaka if havnt
@ElReySupr3me3 ай бұрын
Haven’t sold it yet. Most buyers are backing down due to me not fixing a slow leaking clutch line. Just been busy with life and haven’t fixed that 😅. Don’t get Yonoka! I been wanting to make a video about how bad it is.
@mvngo26033 ай бұрын
@@ElReySupr3me I was debating if I should for a awd automatic. It be worse lol. Just wanted something nice n shiny. Only thing I have is their radiator
@mvngo26033 ай бұрын
Nice looks good. Waiting for mine to come in for my rd1
@ElReySupr3me3 ай бұрын
You will love it!! Probably my favorite mod tbh.
@Chuy9o94 ай бұрын
Did you end up mounting fog lights ?
@ElReySupr3me4 ай бұрын
No I didn’t. I’m actually trying to sell it so I can get a bigger suv since this car won’t comfortably accommodate an extra child.
@billiedean92184 ай бұрын
Got a 98 RD1 5 speed blue. 450,000 miles and runs perfectly. Bout to start modding soon. Cant wait to get it right
@ElReySupr3me4 ай бұрын
Good luck I hope the best in your modding!
@ElReySupr3me4 ай бұрын
That’s a lot of miles btw!
@brensdaman9264 ай бұрын
I really want to swap my rd1 center console with the 2nd gen console
@ElReySupr3me4 ай бұрын
I believe it’s possible. Just do your research. I think I seen people use a gen 1 or 2 Honda odyssey center console in their rd1s as well.
@oakgarage38345 ай бұрын
Do you know the light bulb size for the 2 overhead lights?
@ElReySupr3me5 ай бұрын
Go to superbrightleds.com I use that to reference all my cars for leds
@filthybronco5 ай бұрын
Hey bud what model n year jeep is that lip frm?
@ElReySupr3me5 ай бұрын
05-07 jeep grand Cherokee lip
@user-pk5vo7ec5v5 ай бұрын
What’s the little skirt under the bumper from?
@ElReySupr3me5 ай бұрын
It’s from a jeep Cherokee.
@user-pk5vo7ec5v5 ай бұрын
@@ElReySupr3me what years?
@ElReySupr3me5 ай бұрын
@@user-pk5vo7ec5v damn I don’t remember. Early 2000s. It’s the jeep grand Cherokee though. You should be able to google “jeep grand Cherokee lip for Crv rd1” I’m sure something will pop up on what year.
@user-pk5vo7ec5v5 ай бұрын
@@ElReySupr3me awesome thanks man
@JustKev_216 ай бұрын
This is 🔥🔥‼️
@ElReySupr3me6 ай бұрын
Thank you. I really appreciate your comment.
@Tom-KswapIntegraDA6 ай бұрын
I just ordered one! Awesome video just wish you had taken some side shots entering the vehicle. Thanks Bud !
@ElReySupr3me6 ай бұрын
Didn’t think of that. Thank you for the critique. It’s a fine shift boot, and the quality of the leather is high.
@brisketnbulgogi_75877 ай бұрын
What window visits are those?
@ElReySupr3me7 ай бұрын
Wells visors
@brisketnbulgogi_75877 ай бұрын
What tires and window visors are you running?
@ElReySupr3me7 ай бұрын
Wells visors. Tires I got to check later.
@viksoner17798 ай бұрын
Looks clean 👌
@ElReySupr3me8 ай бұрын
Thank you!
@el40jala958 ай бұрын
Que tipo de bumper usaste ,se ve muy bien chingona ?
@ElReySupr3me8 ай бұрын
Es el bumper original con un lip de un jeep Cherokee.
@ElReySupr3me8 ай бұрын
Gracias
@jason99879 ай бұрын
Anyone got the links for the lights and bull bar ? I keep looking on Amazon and can’t find them.
@ElReySupr3me9 ай бұрын
In the description I put exact part numbers for the bull bar and the bull bar mounting kit. Then for the grill lights I put exactly what you type on ebay.
@ElReySupr3me9 ай бұрын
Let me know if you find them. Should be simple to find.
@jason99879 ай бұрын
Thank You!@@ElReySupr3me
@MattIsBored3229 ай бұрын
How did you replace the grommet into the body of the car? I got my lines out and cleaned, now i cant seem to get the nozzle back in the body
@ElReySupr3me9 ай бұрын
Damn man. I got rid of this car years ago. So I can't help you out on this.
@DReyes-vf7hx9 ай бұрын
Did u change all the clips even the ones on the plastic that says crv
@ElReySupr3me9 ай бұрын
Only changed if necessary. I believe I did though.
@ElReySupr3me9 ай бұрын
Don't forget to subscribe!
@DReyes-vf7hx9 ай бұрын
Ok cause I just bought some nerf bars and the center plastic that says crv one of the clips were deteriorating so now I can only screw one side in. Am I able to get clips from auto part store or dealer only
@haroldking539210 ай бұрын
If i wasn't running an IPF grill in my crv id probably do something like that
@ElReySupr3me10 ай бұрын
Man I'd prefer that IPF grill. Thing is clean but hard to find.
@haroldking539210 ай бұрын
@@ElReySupr3me yeah I got lucky when I scored mine Got it with perfect condition lights and no broken tabs. Plasti dipped to preserve the chrome
@retro2modern37610 ай бұрын
Nice i ordered the light strip that goes along interior of the hood and comes on when you start car
@ElReySupr3me10 ай бұрын
That sounds pretty cool. Do you have a video of it?
@retro2modern37610 ай бұрын
Gimme a sec I'll link you up
@danielmaldonado327210 ай бұрын
Dope addition. Currently working on my own rd1 for overlanding too. Keep up the good content homie 👌
@ElReySupr3me10 ай бұрын
Keep up the build for overlanding! Thank you ill keep it up. Adding a bull bar next!!
@georgewong2181 Жыл бұрын
Bro what is that bar called that you have behind your seats that you go from Teamsolcal? I tried researching that bar but have not succeeded finding it now where nor videos about it. Please lmk what's the name of that bar and where I can get one. Thank you
@ElReySupr3me Жыл бұрын
I got it for free, but it's essentially a c pillar bar.
@robertpearce5553 Жыл бұрын
I think weight is 2300lbs I'm a trucker and might buy a 93 with vtec and for sure I'd go to a truck stop and scale and get weight balance
@ElReySupr3me Жыл бұрын
They don't weigh too much. They are the sMe weight or nearly the same as the hatches. Only because its a targa and the reinforced targa area made this car heavier. Enjoy rear 93 vtec. The vtec b series models are a dying and rare breed now.
@robertpearce5553 Жыл бұрын
@@ElReySupr3me thanks for reply it's a 94 vtec I'm trying to decide an mr2 or the del sol and if I buy the Honda I'm buying some 9lb 15" Enkeis RPF1s
@gerardoesparza8650 Жыл бұрын
What cons, there aren’t any cuhhhh. It’s just a special feeling that old Honda Quality… the last of the Mohicans these were…90s is all Honda for me…
@ElReySupr3me Жыл бұрын
The golden era 💪🏽. Yeee
@ElReySupr3me Жыл бұрын
Give a homie a follow tho cuhh
@h22eh6 Жыл бұрын
I wonder if there is a video about getting a truck release put in a 94
@ElReySupr3me Жыл бұрын
I put one from a newer year. Never made a video on that. Its easy tho
@h22eh6 Жыл бұрын
Honda also put rear sway bars on later model delsols
@ElReySupr3me Жыл бұрын
Mine has a swaybar. Only because its the VTEC model. They aren't that big though vs a integra type r.
@h22eh6 Жыл бұрын
@@ElReySupr3me I still love mine. My second one. Will never sell it again
@ElReySupr3me Жыл бұрын
@@h22eh6 they are getting rarer to find. Especially the edm and jdm parts. I'm sadly going to part mine out soon.
@h22eh6 Жыл бұрын
@@ElReySupr3me why??
@ElReySupr3me Жыл бұрын
@@h22eh6 saving to get a house. Can't spend money on cars. Except maintenance. I'm going to eventually get a muscle car once I get a house.
@LoganJohnsonWA Жыл бұрын
Subbed for fellow crv KZfaq.
@ElReySupr3me Жыл бұрын
Thank you! Really appreciate it!! Just subbed to you as well.
@LoganJohnsonWA Жыл бұрын
@@ElReySupr3me thanks bro!
@colinshum5216 Жыл бұрын
does it dim properly?
@ElReySupr3me10 ай бұрын
Sorry for theate reply I did not see it until now. To answer your question yes it dims properly. I always have it on high, but you can definitely put it on low.
@colinshum5216 Жыл бұрын
super clean!
@ElReySupr3me Жыл бұрын
Thank you. I got lucky finding it.
@colinshum5216 Жыл бұрын
did you get a bigger battery on the crv?
@ElReySupr3me Жыл бұрын
No it's the same size. Im not expecting to put a crazy sound system. Mostly did it to have fresh new wires.
@TheRealDrJoey Жыл бұрын
I had a 94, and now I have a 97. The 94 was not VTEC, but it was quick enough to be fun, and got 39 mpg. Right after a primo paint job it got stolen and wrecked. The 97 is a different story. For one thing, my 94 did flex, as you say. You could look in the side rearview mirrors and see it. But my 97 is stiff as a board, so either I'm lucky or they did something. It has a 1.8 L. Type R Acura motor (B16CE, if I remember correctly), with limited slip built into the tranny. I also have my hood, roof & headliner, roll bar cover, trunk, and rear facia carbon fiber. I wish I had left the roof stock though, because the carbon fiber isn't much lighter than the stock aluminum roof, and when the top is up (Only when it rains) it squeaks like mad. I swapped out the 97 front bumper for the older style, which I like way more, and it's now wired so they can be on as running lights, independent of the headlights. It's also got a Skunk 2 throttle body and ceramic alloy headers, with stainless steel braided brake lines. I put in excellent coil-overs, and the thing handles great. I've auto-crossed it quite a bit. I never had any trouble with leaks on either car until some tweaker shot a bullet through both my windows (over 900 bucks apiece) and since then the driver's side window doesn't quite seal right, and I lay a towel over the driver's seat when I wash the car. I see you have the cool little JDM interior door handles, with the little map lights. I have those too, and I also luckily acquired a pair of billeted aluminum latches for the roof, to replace the plastic ones. I love my Sol, and hope to keep it for life. When my first one got stolen I just couldn't think of a better car to replace it with!
@Moco_crv Жыл бұрын
Small things always give you a great satisfaction. Great to see another video. DBfam is definitely bringing the V’s to new eyes. Hope we can do the same.
@ElReySupr3me Жыл бұрын
The little things make the biggest differences. Thanks bro, and yea DB is definitely helping with that Crv content. Hopefully we can!
@jamestyndall529 Жыл бұрын
Looks like it could have been an option from the factory!
@ElReySupr3me Жыл бұрын
It should have been to be honest. There is an oem option in that rectangular spot. It's a bag that gets connected to that spot. Extremely rare. I prefer this method though.
@diegoremolins9917 Жыл бұрын
Alfredo, muy linda tu Honda. Me gustaría ver mejor tu camioneta terminada. En la calle y con sol
@ElReySupr3me Жыл бұрын
¡Muchas gracias! Y si quiero hacer eso pero todavía no esta terminada. Quiero reglar unos type r rines primo. Y después voy a tener un vídeo de mí carro terminada. Pienso en un año o menos va estar terminada. Muchas gracias y porfa subscribe 🙌🏽.
@ElReySupr3me Жыл бұрын
El fin de el video tengo unos fotos
@lx_42091 Жыл бұрын
All that bs for one rev?!
@ElReySupr3me Жыл бұрын
All b series sound the same. Maybe you can look for other videos. Exhaust is shit btw. Not worth it.
@1Rude86 Жыл бұрын
This kit is no longer available
@ElReySupr3me Жыл бұрын
I believe it is, but the guy increased the prices. That's the kit. It's $10 more now. www.ebay.com/itm/125695495998?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GdzKWBBdQFK&sssrc=2349624&ssuid=v12yLpLJR3u&var=&widget_ver=artemis&media=COPY
@ElReySupr3me Жыл бұрын
Actually it's the same price. But thats the exact kit I bought. I absolutely love it and has cleaned up the engine bay well.
@ElReySupr3me Жыл бұрын
Please subscribe to me bro. Much appreciated.
@Escamdalos110 ай бұрын
Sure is available?
@Escamdalos110 ай бұрын
I don’t find it
@kobiswadling5970 Жыл бұрын
Great video man! I'm trying to add my own custom table to my crv tailgate. Anyway to get a bolt/nut through that sheet of metal Infront of the spare tyre slot? Can't seem to find away to get at it from the inside, and really don't want to weld!!!
@ElReySupr3me Жыл бұрын
Thank you much appreciated. I dont think there is any way to do it without welding. I couldn't figure out a way so that's why welding had to happen.
@mr.bigrigs2059 Жыл бұрын
just got my 97 del sol
@ElReySupr3me Жыл бұрын
Nice man congrats. That 97 del sol dolphin nose bumper is getting rarer and rarer by the year.
@mr.bigrigs2059 Жыл бұрын
@@ElReySupr3me I'm in Stockton also if there is any meet please share , thanks man!
@connbon Жыл бұрын
Thank you for making this vid! Gonna try this on my 99
@ElReySupr3me Жыл бұрын
Thank you for watching! Goodluck it can be finicky working those tabs out.
@Moco_crv Жыл бұрын
awesome quick upgrade.
@ElReySupr3me Жыл бұрын
Yea! Leather so its a plus, and its really snappy. It just throws itself up when you push it up.
@ElReySupr3me Жыл бұрын
Thanks for the comment! Appreciate it.
@cardiac71 Жыл бұрын
In electrical terms, "Flow" refers to current and is measured in Amps. Voltage is proportional to Amperage but not the same. Think of voltage as the fluid inside a pipe. You can ( although not an exact comparison) think of Amperage as the viscosity of a fluid. Any damage to the insulation of a wire will negatively affect your Amperage and cause voltage drop. If there is a portion in your wiring that is showing wire/damage to the insulation, you should definitely look to see why. Is it rubbing on something or getting pinched? You may want to include some plastic conduit in this area or even wrap in it electrical tape or rubberized wrap and then electrical tape and then apply a sealant covering the tape so it won't break down due to the wear of plastics in the environment. The problem with any worn wire insulation is that it allows for corrosion. You can think of corrosion as debris in your fluid. If there is corrosion you will experience voltage drop which negatively affects your more sensitive electronics like the speaker system. You may hear some distortion. This would be shown by reading the frequency which is also proportionally affected by your voltage and amperage. Frequency is measured in Hertz. Anything that depends on variable frequencies like most electronics will be affected. Hope this helps for anyone wondering.
@ElReySupr3me Жыл бұрын
Thank you for the comment, and the time to write this. Your educating me, and potentially anyone else that gets to read this to comprehend in leimans terms what amps and voltage are. My wiring is fine, and my original wires were not too degraded. I just seen an opportunity to upgrade for making a new video; plus adding a thicker wire for the future. In the near future I want to add new speakers and a 10 inch subwoofer. Hoping the thicker gauge can help with voltage.
@kennyc7431 Жыл бұрын
How did you put all the plastic bits back on the nerf bars?
@ElReySupr3me Жыл бұрын
So their are rods that go threw the holes. After you put the long screw inside the rod then tighten.
@fume5671 Жыл бұрын
crv looks great about how much was the lifted set up im currently lowered love it..but the lifted look grew on me..is it just me or is the video lighting looks dark
@ElReySupr3me Жыл бұрын
The lift spacers were about $200. The rear TA 1" spacers were about $100. Albeit, I did spend a lot more money by refinishing my whole suspension setup except my rear LCAs. Which was a hefty price. Tires were $800. So after taxes if you just do the basics that I mentioned then arund $1200 after taxes. Also, you need a rear camber kit. To allow tires to sit to proper spec. I used SPC Moog rear camber kits. Yea I prefer lifted myself. Only because this is my daily dad car, and I need to not worry about potholes and pavement. Yea the lighting sucked during certain parts since some was filmed during the dark. My apologies. This was a 6 month project lol.
@kinggeedora Жыл бұрын
Hey man out of curiosity what did you pay for these? Was it a junkyard find? Looking for some myself
@kinggeedora Жыл бұрын
Ah nvm just saw you answered this question already!
@ElReySupr3me Жыл бұрын
@@kinggeedora yea man. If your in Norcal I'm going to be selling my set.
@kinggeedora Жыл бұрын
@ElReySupr3me i actually am in central California. I may be interested just comes down to price haha
@ElReySupr3me Жыл бұрын
@@kinggeedora send me a message on ig bro @supr3me_trekkie
@kinggeedora Жыл бұрын
@@ElReySupr3me sent
@frias2287 Жыл бұрын
🔥🔥👍💯
@ElReySupr3me Жыл бұрын
🙌🏽
@frias2287 Жыл бұрын
@@ElReySupr3me 🤝🤝💯
@mon2u Жыл бұрын
What size tires you got?
@ElReySupr3me Жыл бұрын
I'll check later when I get home. Im upgrading to 215/75r15 for yokohama geolanders soon on some ctr wheels.
@mon2u Жыл бұрын
@@ElReySupr3me i have 225 on my crv so i think my tires should poke out more than yours hopefully
@ElReySupr3me Жыл бұрын
@@mon2u my tires were 205/70r15. But I just mounted 215/75 r15 AT tires.
@johnnyplurlife Жыл бұрын
Great video bro. What thread pitch did you use ?
@ElReySupr3me Жыл бұрын
Thank you! Do you mean the threads on the titan spacers? There should be a link in my description that shows what titan spacers i used.
@ElReySupr3me Жыл бұрын
If you go on titan wheels website you can find your vehicle specific wheel spacers.