I have a olight and I don't care for the proprietary charging cable. Idk how times I've lost it lol.
@bobscott1176 күн бұрын
Dude you cant even say tamiya or axial correctly you definitely don't know what you're talking about 😅
@GunsGearsBeers6 күн бұрын
Worked at a hobby shop for 3 years and have been into the hobby my whole life. Thanks for your opinion and for bumping this video. Comment any time, I’m up for a challenge in knowledge against keyboard warriors 😂
@williamwillis454619 күн бұрын
The ports help keep the gun on target after you shoot.
@angeloterrones97892 ай бұрын
My olight just gave out on me less then a year in done with this company. Stream light or nothing.
@chrisgross312 ай бұрын
Its a graduated cylinder not a beaker.
@douglasreed92372 ай бұрын
Those bear loads definitely have more power. Nice rifle, congrats, and thanks for the nice review.
@andyanderson77124 ай бұрын
Ive made this mistake and it cost me a headache and had to start over. When cerakoting bigger parts especially like AR15 parts make sure to wait 15 min between coats. Wait 15 min before putting it in the over to cure. IMPORTANT: Oven cure for 20-30 min at 180 BEFORE final cure of 250 for 2 hrs. I didnt follow this exactly and ended up getting something called "Solvent pop" Pics are posted on Reddit Cerakote section. Once I followed instructions from Cerakote to a T the final product came out amazing.
@johnspencer72916 ай бұрын
I have the same charger,when yours went off for full charge made me look at mine lol
@felixkamie81686 ай бұрын
I see you have a Tamiya Toyota Bruiser. Nice man
@Tigris_River_Sand_Fleas7 ай бұрын
What if you have a paintjob you want to cerakote over? If you sandblast your paint job, you'll ruin it. Same goes for cerakoting over a hydro dipped project. As far as the blades, you need to know what you are doing. Certain blades are heat treated at certain temps... But as long as you are well below that temperature it shouldn't change the metallurgical properties.
@jameshaines87467 ай бұрын
Well done, I'll stick with my FrankenWave, but I have been eyeballing the Free technology
@samuelbircher98137 ай бұрын
Nicely done sir! (Y'arrrrrr!)
@BigBrotherVinny7 ай бұрын
I carry the same knife every day. Seem to not be able to find my others at the moment.........
@GunsGearsBeers7 ай бұрын
I love you too bro….soon…..
@spokanesurvivaltrainingand57977 ай бұрын
What do you video edit with?
@GunsGearsBeers7 ай бұрын
I use an app called FilmMaker Pro. It’s available through the Apple Store
@preacherman90187 ай бұрын
Whoah bro, that's a Microtech! You have good confidence in your skill level. Would like a better look at that beauty. I will hopefully get to try it myself in 2024.
@jalee65879 ай бұрын
Nice collection. That toyota reminds me of the one in back to the future original. As a kid i loved how that truck looked in the movie.
@DaveWalker589 ай бұрын
Interesting creative engineering. Could you have done the same thing using/a Safari Snorkel kit for a 1984 Toyota Pickup? Would the fitment/gaps/etc been about the same? Also. the gray PU w/out a snorkel - what is the name of the brush guard bumper? I understand ARB briefly made their bumpers for '79-83, but have not for decades. It was a bolt on w/no cutting of lower fenders or lower valence -. Few made it to US. Looking for a period correct Bull Bumper/brush guard.
@TerrapinCreations6669 ай бұрын
Anyone have SVG files to make one?
@livinginvolcano10 ай бұрын
My first lever action so can you tell me the reason for half cocking the trigger before firing please? I have mine hot with the trigger pulled all the way back. New to this rifle.
@preacherman901810 ай бұрын
Good job explaining this process. The spray gun is probably top shelf quality. I was wondering if you saw anything at harbor freight that would qualify for spraying / atomizing this coating? I'd rather put the extra $ towards paint when I don't plan to continue this as a hobby, but only a couple items.
@realtyrocks19697 ай бұрын
Bro use the Home Depot rental program.. I have done it more times than I care to admit. I mean buy it, save your receipt, use it for a job and take it back saying it didn't work satisfactory. They'll refund you no problem. It's free in the end and you get your job done
@davidhomen620410 ай бұрын
Love the video very informative Can you do a part two
@realtruth9710 ай бұрын
What size air tank you use?
@GunsGearsBeers10 ай бұрын
21 Gallon Harbor Freight compressor
@likits199910 ай бұрын
Awesome job! Don't ever sell that rig!
@TheDudeAndStuff Жыл бұрын
I need a new light as my old olight just shit the bed and decided to pull up good ol youtube to see what people are carrying these days. I clicked subscribe right around 45 sec, just after that pause to take a sip haha. Solid content, and cool shirt.
@vwkingla619 Жыл бұрын
Can't do this at our shop it's a lawsuit safety issue
@louboom5711 Жыл бұрын
Watching this naked made me feel weird.lGreat looking rifle though man!
@markauxier4050 Жыл бұрын
arkfeld uv - white light and uv dual light sources flashlight Olight
@tobiasgarrard9271 Жыл бұрын
Will it spray through an airbrush?
@solidus1995 Жыл бұрын
I have both. The wedge is more tactical. Better for self defense/quick deploy. The arkfeld seems better for edc and work. Both awesome fucking lights. I bought the wedge before the arkfeld simply due to the universal charging port. As other have mentioned proprietary charging is a deal breaker.
@rolandoleiva5484 Жыл бұрын
I just want the braces where can I get them
@PhiZeroth Жыл бұрын
Hey I think they listened to you.. the newer UV version of the Olight Arkfeld has a slimmer backend and a deeper 2-way pocket clip. Charging port is located in the same place but they've squeezed it down so the magnetic ring cut off on two sides so it's not a full circle.
@wampa4321 Жыл бұрын
Pretty big difference, the wedge puts out more light and easier and quicker to turn on in case of a self defense situation
@AutoSearPin9 ай бұрын
Your gun should have a WML in a self defense situation
@craigbushby515 Жыл бұрын
I back pocket my wedge & it's a great no frills just get the job done light.
@erichyland1412 Жыл бұрын
I’ve been waiting for something EXACTLY like this. Adding to cart....ASAP. Thanks for the info. I’ve always wanted one and I just never knew which one to order 🙏🏻🙏🏻
@vicferrarisgarage Жыл бұрын
Omg I love you 83 toy. Just found your channel so I hope there is some videos on that 83 Toy
@vicferrarisgarage Жыл бұрын
Let me give you some background to help explain some things. Both trucks have lic plate Bruiser because Tamiya is selling this truck as they are with many of their old line (Super champ now called fighting buggy). So they are not going to sue themselves over Tamiya copyright! Why not brand it as Tamiya you ask? Because Bang-good and Alibaba & AliExspress wont sell a brand name ie look up watch bands for G shock, they have no brand in pictures but when they arrive at your home they still say G shock on the band because it is G shock making money at a lower price and yep I sell G Shock wrist bands. Lol However Toyota is not onboard this time & so Tamiya can’t run the name or any other grill branding. Both trucks ARE made in same factory on same assembly line by Tamiya on west Ring rd Jiangsu China. Same place Tamiya has been since 1978. The transmission was a bad design from the start so they redesigned it. Wish they would update steering. Lol How do I know this information you ask? Because I went to China to a Pinball factory, a CNC factory and Tamiya factory for my personal eBay parts company in 2018 for two weeks to see what parts I could get my hands on. Hope that helps.
@vicferrarisgarage Жыл бұрын
Everyone bashes the chrome bed sleeper. I love that!
@carbonoxx Жыл бұрын
wedge only one mode...not good for edc surviving situation u need at least 2 mode............a low mode that last a few hours at least.
@markspencer4246 Жыл бұрын
I put the turnbuckles at the bumper just more convenient when I need o open ghe hood great vid
@MrTylero28 Жыл бұрын
Yes. Paint your shit! Also. Rifle looks DOPE! That some bitchin work! I love spraying guns. Good work my guys!
@jk-guy4226 Жыл бұрын
Awesome video! Trying to figure out if it’s necessary to tape off the area on a knife where the copper bushings ride or not. It’s noticeably polished there on some knives
@Lemon_Sage9999 Жыл бұрын
Very much so, for any kind of coating you want to keep the moving parts free
@Lemon_Sage9999 Жыл бұрын
Also make sure to not coat the lock face!
@XxxSIGMA_SUPERIORxxX Жыл бұрын
Based
@hash46176 Жыл бұрын
I saw a set just like this on facebook market place
@scottzipperer6146 Жыл бұрын
I have a 1895 in stainless steel jm made 1970 20 inch barrel and I have not shot mine yet dealing with car accident
@littlehills739 Жыл бұрын
why not bend ur wire into a " u "shape so its a spring in the hole to stop it moving
@janzelf Жыл бұрын
Years old already, but great tutorial. I got a whole different car, but thanks to this video, I believe I can do it too! 😉
@CodyC2009 Жыл бұрын
@ 0:18 what a sound for the robber to say "nope dark souls gif"