Hello..thanks...i did bl_err wire as u mentioned.....led not blinking red now....sound is ok....but picture goes off in seconds....any inputs?

sony xbr-55a8h oled - can this method help?

Brother can you tell me same use to (KD-75+85)

Thank you so much, Sony didn’t do a thing to help and I can’t believe this work. Superstar

Thank you very much, now my Sony KDL-55W755C is working, greetings from Croatia

I have KD55XD8005 tv. And can't seem to figure out which wire to cut/ground 😖manual says i have to measure voltage og 21st pin on CN400. Which i think is 5th wire from the back on that wire asyy. But other than that, everything on the inside looks fine. I've tried following your video , but it didn't work for my tv. Help needed😢

Hola hice esto y me funcionó perfecto, luego de unos minutos quedo la pantalla negra y funciona solo el sonido. Q puede ser?

HI IS THE SAME METHOD WORK ON SONY BRAVIA DIGITAL KDL-32R300E, HAVE SAME ISSUE RED BLINKLING LIGHT

It is wrong to do this.... It is right to change the backlight led👆

Would this work on the xbr65x800g? I’m scared to cut the wrong wire

Which wire is to be disconnected in Sony KDL 43W 800C model TV.

El mío es 65x855e y también funciona,recién lo acabo de hacer,antes duraba unos segundos encendida y se apagaba....ya pasó ese tiempo y sigue funciknando perfectamente. A medida que pase el tiempo iré comentando nuevamente si sigue funciknando,muchas gracias!

My model is KDLW800D 50inches facing same issue half n hour back so what step should i need to follow

I'm also trying to follow your each step but just wanted to ask that what is the major reason for these kind of indications

Thanks so much for this fix for my 2017 XBR-55X800E. One of my backlights started to fade and Sony decided I wasn't allowed to watch my TV. Simple wire snip and it's back in action, with only a little dimness in a section of the screen.

Backlight is bad

Well.... I'd say it worked for me on my 75". Except for that it let it stay on but the back lights aren't working. So u can barelyyyyyy see what's on screen. So guess I have to change my LEDs or trash it

Muchas gracias!! Me funciono en una XBR-65x855D

The same procedure will also work in KD-49X8200E Series. Kindly let me know if it's works or not

Thank you so much!!! Fixed my KD-65XE8596. Saved 21500 baht in Thailand...

Thanks brother...you have saved my 27k.

Anyone know where this wire is on the XBR 900e’s?

Worked on my 2017 XBR-55X800E like a charm. Thank you!!!

My LED is kd55x8500c. Giving six red lights indicator. Please suggest me which number of wire should i cut?

Hi Dear Adith, I have same TV but my tv 55in. KD-55X8500D and instead of 14+14 pin there is 15+15 pin. I need the pin description or which wire i should remove. Need urgent help before waste the TV.

I tried it's not working bro

Pzzz help How to use( Sony kDL 43 W950C) red light blinking

Really appreciate mate ,❤ it worked for me, for Sony Bravia model 50W800C

It worked great!! Is it a fire hazard now and what exactly did I bypass by cutting that 4th wire? What was the root issue and by bypassing it does that create a hazard? I had 6 flashing red lights originally. Seems fixed now!

Is it work on every kind of sony tv?

@adithkrishnan9538 - I have a SONY 65- can you please confirm, is it the 4th wire on the top row OR for this model, the 8th wire - which is the 4th on the bottom row. I see you have been able to provide clarity to other users. Thanks.

FairPlay just went with what u did mine is a 65 but seems to be working perfectly now thanks again adith 🙌

Anyone help I have my Sony Bravia kd65ke85xx exact same problem with the 6 blinks but I only have 13 wires on top and bottom will I still cut the 4 one I have tv down took apart and just need an answer 😅 thank u

I am getting se2 44mm cellular 14 months old for 15k from OLX. Is it a good deal if there are no defects, and has screen protector?

Worked for the time being on a 3 year old 85" xbr-85x800h - same wire (top row, 4th in from the right). Sony calls this Pin 8 on the pinout that is on the board, but it is the one in the video above. Cut the black wire, ground out the end from the cpu board, and all is well. Hope it gets my by awhile longer!

Any assistance for a Sony KDL-40W650D blinking red light 3 time.

It work for me, I saved 700£ with your video mate, thank you.

would this work on Sony KDL-75W850C KDL-65W850C and would it still be the 4th wire?

Worked on my KDL 55W809C. Has been fine since the fix for last 2 weeks. Cheap fix. Hopefully continues the same for some time 🤞. Thanks Adhik

Mine blinks 5 times what do ido

Nice fix, have to try on my TV. However it doesn't indicate the root cause, I suspect its the power supply board, likely a blown capacitor or IC. One alternative is to solder another LED to the wire - maybe with a transistor/resistor combo and drop it down at the back, that way you can still get the blinking indication for other errors.

I feel like this is a fire hazard

Hola, tengo ese mismo problema pero en un modelo KDL-42W560A. Puedo repararlo de igual forma? He visto otros vídeos donde colocan una resistencia de 10K en un pin y desde ahí hacia tierra.

Hey is here anyone who can help me figure out BL_ERR wire for my tv. I have a diagram from manual of this tv XBR-55X850D & it says 12 in yellow background & 21 in green background. What does that mean & how to count & get proper wire to ground it ? Edit: Found the pin & now it’s working fine. Thnx

Gracias por el video, pude realizar la modificación en un Sony XBR-55X805E y resulto perfecto, se termino el problema, el cableado no es igual pero, es de 14 pines e interrumpí el cuarto cable fila superior. Saludos desde CHILE