best tutorial to make box cushions! Thank you so much for making it fun and especially easy!!

Both your original boxed cushion tutorial plus this updated version are wonderful. I have watched so many videos, and your videos make the most sense to my brain by far! Thank you!! However, I'm struggling because my fabric is only 54" wide and my cut material needs to be 57x57 according to your formulas. I need to add a seam somewhere to get to 57", but I'm struggling with the math and where to add the seam so it doesn't show. Do you have any other videos or recommendations? Thanks!

I’ve been sewing for about 50 years, never thought todo zippers like that, thank you. One thought for fraying fabric, just zig zag if you don’t have a serger. Thales a bit more time and thread but worth it, especially on edges you zipper. I also spray with Scotch Guard, resists stains & moisture.

Awesome tutorial thank you ❤

Do you remember where that fabric is from?

Hi 👋🏽 Thank you so much for this video! I got all the way up to the end where you make the last two cut outs at the corners ..Quick question… if my cushion is 4 1/2”, what should my corner measurements be? Thank you in advance for your help

Best tutorial I have ever watched for box cushions, you just made my life easier, thank you

Awesome tutorial! I was going to just turn my outdoor fabric into a huge, long pillowcase for my 6' bench cushion (×2 for seat and back) till I found your tutorial! Thank you for telling us the thread you used. I might've used regular thread. It's been about 20 years since I've done any sewing. I'm a little nervous about the project, but I'm sure with your tutorial, I can do it! Thanks again!

Thank You... it is through MTN my fears of living in this country quelled. I haven't talked to my daughter snice she voted for Trump the 2nd time.. through her prayers.. I told her she needed to check who she was praying too.. Hopefully that will now be healed.. ATY

I have been trying to find a tutorial to be able to make one of these box cushions for outside fabric and I have watched many of them. Your tutorial is so well done that even a beginner could make one. Thank you I appreciate this tutorial so much.

This is the absolute best video to make this cover! Thanks so much! Great tutorial!

I have a long foam matress that my dog loves and it needed a new cover and your tutorial was fantastic. I bought the really long zipper and made it and it came out really good. Thanks for your tutorial

My cushion measures 40 x 15. That is the size foam +3 inch height of the foam. My measurements were 37 for the depth and 44 for the length. It is not long enough and is too deep. Any suggestions that I might do to fix this problem as it is quite expensive for the foam and fabric. 20:42

Why is my cushion cover too small? My cushion measures 40 x 15 and the foam is 3 inches I cut the depth to 37 and the width to 44 is that correct? It is not long enough and too wide. Any help would be greatly appreciated as materials and foam are quite expensive.

Do I need to protect my foam with anything for outdoor patio cushions if I’m using the canvas waterproof outdoor fabric

I purchased this and am wondering if this type of matting will work: Light Weight Bonded 100% Polyester Batting 4oz 48"?

Excellent demonstration. So simple. Thanks

hi, novice sewer here. I followed your directions for measurements to a tee, but it’s rather loose fitting. What did I do wrong?

Just now watching this video and have a much easier way to do those last 2 corners. Just orient the seam to be in the middle of a triangle and sew over the wide end of the triangle the correct depth you want the corner to be. Reinforce the seam and trim to the 1/2” seam allowance you are using and voila’ you have a quick corner.

I love your tutorial! You explained the process very well! I am going to make my cushion very soon! Your method is fantastic! Thank you!

This is the best video I came across! I found another video describing corners only which was great too. I started practicing with an environmentally friendly canvas drop cloth, minus the zipper. It actually looks nice. I used 5 inch foam with half inch Dacron. It's a little on the firm side. This is a 1960-70's cushion redo from my grandparents old wood den set. Thanks again!

I just finished making a futon cover using your first video last night and thought I would review the video again, just for memory sake, when I suddenly ran across your new updated video. Your first video was very good. My only complaint was that it was not in landscape mode so this video is much easier to watch, and very instructive as well. Thank you for taking the time to teach us all how to make cushion covers you are the best!

Funny, I’m covering some cushions with the same fabric!

Thank you , do you have a tutorial for curved back cushions? Your explanations are so very easy to follow.

You have done an amazing job with this video. Thank you it was exactly what I was looking for.

I didn’t find this as easy as I hoped 😂 but I was making a 2m long box cushion which might have been part of it. I really battle to make the zip ends neatly into the seam. Lit if ripping & redoing

i'm wanting to re upolster my boat cushions with curves and even one inside corner. Can this method be used for them?

Love your video

Thank you so much for taking the time to share this with the rest of us. I enjoyed the video and learned a lot, including the difference in zippers. I never even considered the different options. You are clearly very skilled and watching your speed, vs my own, reminds me that I’ve got a lot of practice ahead of me. I’m a mid 40s man who is always trying to learn something new. I purchased my “project runway-Brother” machine a few years ago but was soon sidetracked with 3D printing as my winter project. I’m hoping that someday one of my daughters will come to me for help sewing something. By then I hope to be able to show off my superb sewing/ upholstery skills and blow their minds. Thanks again for sharing your knowledge and experience.

Great vid. I made a dog bed using the first video. There was nothing wrong with the vid. Just requied a bit of attention and note taking. Thanks for taking the time to make these.

What an excellent tutorial! Thank you so much for this great video. I’m making two cushions for me and my husband and one for our 18 year old poodle/bishon so she can be more comfortable.

super et très facile pour des coussins droit j le garde

Great and easy to follow video. Thank you for an easy way to cover cushions!

Just wanted to say thank you for this video!! I am a total novice (this was my first project ever) and I was able to completely transform a $100 FB marketplace sofa and chair with new cushions. I even used the pattern to make the back cushion cover inserts (just didn’t add a zipper) and everything came out so beautifully. Can’t thank you enough!

question: if my cushions are not square, how would I calculate the measurements?

Thank you for your stitching

I love your video!!! I don't sew much, so sewing can be very intimidating to me. Your instructions video helped me make 2 cushions for my window seat. Thank you thank you thank you thank you!!!!!!!!!

Thank you for helping me now I can sew my cushion it's so easy

Thank you for this excellent tutorial. My bench cushions turned out beautifully! Thanks to you.

Could I use velcro for the closing

Soy una mujer ama de casa Nicaraguense que ama el arte de la tapiceria, he logrado aprender gracias a personas como tú que comparten sus métodos de costura. Me gusta este método muy práctico para elaborar los forros de cojines con zipper. Ahora mucho tiempo.

Thank you - very explanatory 🙏

Where do you find the cushion insert? Is it foam??

The most straightforward video I have watched. Demystifying this subject. Well done.

Thank you for the update.. measuring was much better! Watching it with a steady camera was also much better🙂\

I think I love you! I just built one from another fabric store video. I could not get the cover over the 5 in. cushion using a velcro opening. It had welting and everything, and this was so much better and easier!! I have to make a bunch, as it sounds like you do as well. Thank you, Thank you!

Best tutorial

Don’t like the vertical view

Thank you very much. I like your tutorial, easy to follow 😍

What size needle are you using on the vinyl? I house the same machine. Love the pattern!