You can use live call connect. When we bring a guest into our TriCaster we open the teams call on a laptop connected to the same network as the the TriCaster and then use the NDI functionality of teams to extract the guests from the Teams call and allow them to be viewed as NDI sources on the network.

Yes. All TriCasters can input NDI HX sources including NDI HX 3. All TriCasters only output to full bandwidth NDI

Canon does carry security cameras, however we only offer the PTZ cameras for livestreaming. If the CR-N500 and CR-N700 are out of your budget, I would recommend looking at the Canon CR-N100.

You can access the LiveU Solo Portal and configure the setup on a phone

Yes. We use a green screen and key it out on our Vizrt TC1 Pro. A lot of streaming hardware, and software have the ability to key out a back round.

Looks great

The ability to Livestream to KZfaq Shorts is a fairly new feature and with YoloLivs track record of updating YoloBoxs on a regular basis, there is a good chance the vertical streaming to KZfaq Shorts will come in the near future. I would recommend following YoloLivs Blog for the latest update information.

You can not. However the YoloBox Ultra does have a beta where you can control it from your phone. Make sure to check out YoloLivs blog for the latest updates to all the YoloBoxs

Editing workflows can vary depending on which software you are using. Please feel free to give us a call at (800) 323 2325 and we would be happy to discuss further.

Hi there, please give us a call at 800-323-2325 or email us at [email protected] and we will help walk you through this

Most PTZ Cameras do not record video or audio. However, Most PTZ cameras do have an audio jack them which would allow for audio embedding into NDI. then you can bring the NDI feed into a switching system or NDI recorder like the Kiloview Cube R1 and record the video and audio there. If you would like to discuss this further, please feel free to give us a call at (800) 323 2325.

@@Videoguys 🥵THANK YOU 🙏

It is NDI HX 2, Currently it can not be upgraded to HX3, not sure if it will be able to in a future firmware update.

The IP-100 is a controller that uses IP connection, it does not do switching. If you wanted to use an SDI switcher, you could get one of Canons cameras with SDI out and use that for the video, and then use the IP functionality for the control with the IP-100.

@@Videoguys hi there, yes using with the ATEM SDI switcher. I’m confused as to how I’d get that remote feed into the switcher. I understand how I can control the camera remotely via the IP100 but not bring into my production?

@@thecommsguy. Unless your switcher can take IP/NDI Sources you will need to hardwire the cameras to the switcher via SDI. There is no way to pull the camera feeds out of the IP-100 controller directly. If hardwiring is not an option, you could use an NDI decoder to convert an NDI signal back to SDI something like the Kiloview N50. If you would like to further discuss your workflow, feel free to give us a call at (800) 323 2325

@@thecommsguy. The controller controls all of the cameras, it does not do switching. The controller does not have an HDMI or SDI output. If you wanted to use the network features of the camera for video you would have to take the NDI feed and convert it back to SDI. I would look at the Kiloview N50 if that is what you would like to do. Please feel free to give us a call at (800) 323 2325

They will not work with the HSW10 via RJ45 as the IP functions of those cameras need to be accessed via the LUMIX tether app or a computer.

@@Videoguys the BGH1 has RTSP streaming. I'm wondering if this switcher can detect it

Not at this time. As of right now you can choose to stream/record either horizontally or vertically, not both

yes, VITC is supported on the KY-PZ400N

You can purchase the controller from our website videoguys.com. It connects to the KMIP8 via USB

What camera and monitor are you using?

@@Videoguys a7siii and Ninja V. I need to know how to crop it and fill the whole screen to prevent it

@@TommyMacTube After doing a little research, I think you need to go into your camera settings and look for a setting called "HDMI info Display" and turn that to off. That should get rid of the menu info from the camera to the Ninja V, and make just what the sensor sees from the camera appear on the Ninja V. Hope this helps!

@@Videoguys yea I'll try it! thanks a bunch for helping

It should, we haven't tested it. We will always stand by Netgears Pro AV Line of Network Switches as the best switch to use in an NDI workflow.

That is not a crazy solution at all. That is what it is designed for. The Blades to get your dailies out in the field and then the Station for use at your editing computer.

The Shogun ultra is constantly getting updates from Atomos. you can stay up to date by checking out Atomoss website : www.atomos.com/product-support/?parent=shogun

You have to purchase the NDI License from Atomos, and once you do so you will have the option to connect the Ninja with the Connect to your network and from there you can see the Ninjas video feed on any NDI HX compatible device - such as Studio monitor from NDI Tools

The Pixellot cameras do not have the ability to stream. They record locally, and then once the game is done you send the game to the Pixellot platform for Analysis

The YoloBox Ultra cannot stream to KZfaq vertically at this time. It may come with a future update. I recommend checking out YoloLivs blog as they are constantly updating all of the YoloBox products