Please show 2019 jcworks automatic transmission fluid change godbless you 🙏
@robbier366115 сағат бұрын
Also please feature how to replace transmission fluid. Thanks again and godbless 🙏
@robbier366115 сағат бұрын
Please resend the link, can't 👀 them
@tabbyisirish2 күн бұрын
Omg your pug phone rest!!! 💞💗💓I have two pugs 🐾🐾
@Steve-ew5sl2 күн бұрын
My personally I had very luck on just doing drain and fill instead of flushing But there some old ATF fluid in torque converter and clutch act as friction My service interval was coming up soon 20K miles 2024 Countryman just doing drain and fill instead of flushing it completely My experience on transmission flush on Nissan Rogue was awful it slipping it won’t go into gear unless if I floored the gas pedal 100% full throttle get it moving 😂😂😂😂 it happened 2023 when that car was last used been sitting garage never used again
@alan2921612 күн бұрын
Digging the cow slippers 🐮
@PabloConcrete2 күн бұрын
I really enjoy this long video format! Great content as usual! Can't wait for you to get into Porsches!
@dccrawlers75953 күн бұрын
Would you be willing to share the files brother that would be awesome
@Gaming-Legends0074 күн бұрын
The early 60’s mini coopers only had one stripe on the drivers side.
@ridergarnes74 күн бұрын
Dude you are a maniac driver
@improvedgarage4 күн бұрын
I guess? The Acura TL part is really the only part i would call aggressive though. I think the wide angle on the camera makes the speed seem higher than it is, most of these roads are 55mph and i of course am always doing the speed limit ;)
@btverse5 күн бұрын
Falling out of my ear is the most frustrating thing ever. Will have to try these
@glosliefrancis83606 күн бұрын
Dogs distracting
@ModOnStream6 күн бұрын
Can I use this program to diagnose for errors?
@improvedgarage6 күн бұрын
It’s really only for bmw vehicles, but yes. It can read and clear trouble codes It can read and show sensor values It can log sensor values over time.
@ModOnStream6 күн бұрын
@@improvedgarage I have a Bmw, but I can't do a normal troubleshooting car diagnostics on it
@ronrobertson93247 күн бұрын
I believe that you failed to lubricate the O rings.
@improvedgarage7 күн бұрын
I did it, just didn’t get it on camera. Sorry about that
@Steve-ew5sl8 күн бұрын
My F60 2024 already need brakes I just don’t like rear brakes pad makes rim get much dirtier I cleaned them last time Time for upgrade ceramic brakes pads less dust which I liked Interesting my 21 Nissan Rouge hasn’t been road 7 months already was completely stolen and totaled in accident sold for junk title I talked Nissan service advisor removed car from in service date to out of service date
@kyleknight82678 күн бұрын
15:16 the forbidden coffee
@OldSchoolDad8 күн бұрын
Agreed. I have a bunch of them. Use them in my oscillating tool, impact driver, drill, and installation tool. They last a long time and charge so fast also!
@dannyo9574169 күн бұрын
I bought the M12 surge and returned it nowhere near the torque of the regular M12 minus the quietness
@improvedgarage8 күн бұрын
Yea I mentioned that in the video. I honestly think the regular has too much torque. It can do m18 things.
@Hello-ms1lb9 күн бұрын
I watched your old video of selling Flex cordless and keeping the Milwaukee one. Do you still use Milwaukee polisher as your main? Do you still like it enough not to swtich to the new Rupes cordless or something else?
@improvedgarage8 күн бұрын
Yea. I really like it and it has the benefit of using batteries I already own. I haven’t used the new rupes yet to be transparent. I’ll try it soon
@educationjack57309 күн бұрын
This was an absolute killer video my man. Seriously nice set up
@ericrainey536110 күн бұрын
I have a ford Edge. What size should I get for a complete prerinse without filling it up again?
@improvedgarage8 күн бұрын
2l to be safe.
@andrewlee950810 күн бұрын
Sooo... How challenging is it to remove them, should they eventually need to be replaced?
@improvedgarage9 күн бұрын
Easy, you just turn it and the little arms rotate into the housing.
@stevenrose461010 күн бұрын
Just a PSA, no registered dealers of Milwaukee are on Amazon. So on a baseline, they will not warranty it. Take that as you will. Blame who you want but MW said no, they’re selling on there anyway. Could get out of date stuff, might get lucky, might get outright counterfeits or stolen merchandise. Or return carts.
@improvedgarage8 күн бұрын
Yea I got lucky a few times. I also had a few m18 that were obviously fake. Its a risk for sure
@matt_d782811 күн бұрын
Thank you so much for uploading this vid. I was dreading changing the cabin air filter on my F54 since not many detailed instructional videos are available on youtube. This really helps out a lot.
@caivsivlivs11 күн бұрын
hey mate got a question, when you have the normal headlight lowbeams on, are the middle orange (parking?) lights, the ones closest to the grill on each side, also on?
@scotty72910011 күн бұрын
Yes sir the bronze wheels go very well on the rebel green. Really sweet setup👍👍👍
@Xena-sucks13 күн бұрын
Out of breath in this vid 2
@markjefferson749214 күн бұрын
Brilliant video. Can I ask, as I can't see any info on this, do you have to pair the light (press the button on the light unit) each time to link to your phone? Only asking as I want to put a light high up and obviously can't hit the button each time. All the best. Mark
@improvedgarage11 күн бұрын
It stays connected. You can even turn it off and on from the app without issues.
@markjefferson749211 күн бұрын
@@improvedgarage that’s fantastic, thank you
@user-ld6jl1js5o14 күн бұрын
It's very good for spot cleaning.
@user-mh4pq3sl8i15 күн бұрын
Love your channel ! Great info. How do you make your labels ?
@RodneyCooperFilmz15 күн бұрын
I’ve watched a few videos and it seems like I saw pad stall in a few of them. Did you suffer that when using the polisher?
@ultrainstinct839216 күн бұрын
I have these and they suck! The tool tray falls off and does not stay clipped on when rolling the buckets around. Also everything is plastic so the buckets detach themselves at times! These are so frusturating to deal with!
@Duusin17 күн бұрын
you could have done so much more correction with the cutting step if you would just move a little slower at your passes
@mcflotty17 күн бұрын
Rotary is the ticket lol. Learning curve for me was the DA because I'm older and they didn't really have them or weren't prominent then. Great video bro. Thank you for the post.
@Randy_Gentry17 күн бұрын
I can’t wait for the Harbor Freight version.
@ridergarnes718 күн бұрын
I noticed you weren’t using klin drying towels to dry your car,you know they are the best
@improvedgarage18 күн бұрын
I’ve never used a kiln towel in my life, so I don’t know if they are the best. Most of my towels are from the rag company. Which ones do you recommend
@StevenMack-w8w17 күн бұрын
@@improvedgarage should try griots pfm towels. They are insanely good
@StevenMack-w8w18 күн бұрын
You should invest in a canopy or bring your vehicle inside. Washing in the sun no bueno. Man, the struggle of starting a new KZfaq channel is real. Having to make throw away videos for all of the free products you asked these “B” rated brands for. We all gotta start somewhere.
@improvedgarage18 күн бұрын
These were actually bought and paid for. I can wash in my garage if I want, where I live it’s usually 70 and sunny without humidity so it’s not that bad outside.. 4 years into it, the growth is slow for sure. Appreciate you watching
@StevenMack-w8w18 күн бұрын
@@improvedgarage what made you decide to purchase this brand?
@improvedgarage18 күн бұрын
lots of people in the comments seem to be cost conscious on a regular basis. I was curious myself. If anything is ever given to me i say it in the first few seconds of the video
@atrain13218 күн бұрын
LMAO 🤦... The amount of rude comments that people make on these platforms is sadly hilarious. Especially the ones who think they know what they're talking about. I detail my cars is in the sun, in Texas every two weeks. You can easily purchase a water deionizer which will leave your car spot free when rinsing it.
@improvedgarage18 күн бұрын
@@atrain132 yea, my full wash and rinse setup is 100% di, i store DI water in my garage in a tank and my PW draws from it. I have zero issues with spots.
@STLT18 күн бұрын
Very helpful. Hardest part of lights install was removing the small bin. On the hitch side, you need to clean the threads as much as possible, clean them with the correct tap if you can. Oil it and turn it in slowly. Lots of grime in there if a used vehicle. Brake cleaner, penetrating oil, whatever it takes to clean them out. Paint on the included bolts adds difficulty as well. Solvent the paint off the bolts and they go in far easier. Great video, new just what to do.
@FIFAHERO9019 күн бұрын
Thanks man, you’ve give me confidence to try it!
@AntLive2919 күн бұрын
good deal!
@MrAmonts21 күн бұрын
Thanks for the review. So, if you’re going to do paint correction for an entire vehicle which will you go with, assuming the paint has lots of correction required?
@improvedgarage11 күн бұрын
for me right now, probably DA because I'm more comfortable with it. I think you could be effective with either one
@NO_OPEC_NO_PROBLEM21 күн бұрын
Great comparison! Rotaries are good, I find they tend to make a bigger mess with the compound / polish. DIY makes good stuff, Yvan has great content. Home Depot had the 15MM M18 Orbital on sale for $249 w/ a battery. Just picked one up because I’m sick of my corded Griot’s orbital.
@ethanmckee718522 күн бұрын
what’s the dimensions of the labels please
@improvedgarage11 күн бұрын
for a 500ml bottle It needs to be 6” tall and 2.5" wide at the bottom, 1.5" wide at the top
@Heavydrvr22 күн бұрын
DIRAC ability is worth a lot. Way improved.
@WillieBeamin-t4v22 күн бұрын
Thanks for showing us the diy rotary. Not sure which channels you follow but LarryAMMO and Esoteric Detail are two great sources especially when it comes to paint correction.
@improvedgarage22 күн бұрын
yea there are alot of great channels, Obsessed Garage, the Rag Company, Ammo NYC, DIY Detail, etc. I usually recommend to anyone starting out to watch the ammo academy videos, they are excellent.
@user-yh7ip1yh8i23 күн бұрын
Thank you for taking the time to post this video. Quick question: Why didn't you use the jeweling pad for last portion? Thanks
@WillieBeamin-t4v22 күн бұрын
I think he’s either fairly new or maybe not as experienced to paint correction and hasn’t been able to fully have his process figured out yet? Seems like he’s dedicated to this though so I’m sure he’ll be able to work things out
@improvedgarage22 күн бұрын
i was trying to compare and contrast the two different styles of machines. 1. Cut with rotary, finish with rotary 2. Cut with DA, finish with rotary 3. Cut with DA and finish with DA in the last portion i was finishing with the DA and was using the gold standard waffle pad, since the jeweling pad is specifically called the "rotary jeweling pad" that seemed to make the most sense / be in line with what most people would do.
@improvedgarage22 күн бұрын
@@WillieBeamin-t4v Ive been paint correcting for the better part of 10 years, this was just my first time using a rotary. Like I said early on I was told that DA was safer than rotary, i was always able to get great correction with a DA and never felt i needed a rotary. DIY detail has been pushing the rotary for quite a while and i wanted to see what it was all about.
@WillieBeamin-t4v22 күн бұрын
@@improvedgarage that’s interesting to hear. You’ve been paint correcting for 10yrs or you Did your first paint correction 10 years ago? Curious to know how many vehicles you’ve been able to fully correct within that time frame?
@improvedgarage22 күн бұрын
@@WillieBeamin-t4v It feels like there is some attitude but context is hard in text... I'm certainly not claiming to be an expert, just explaining that I'm not "inexperienced" as you stated. Im not a professional detailer, I work in IT, i have a passion for cars and detailing, I've corrected every car I've owned in that time, many multiple times, I've also done a dozen or more for friends. Total cars? 50 is probably reasonable. Sometimes its just a simple one-step, sometimes its 2-3, this channel alone has 4 years of videos working on my cars. Again, a pro likely does more than 50 in a year, Im not a pro, just a guy in his garage trying to share his life...
@Xena-sucks23 күн бұрын
Who would have to hold onto a blow gun all day😂😂
@1thechosenjuan123 күн бұрын
Very cool that you are open to trying new things but I think it’s always best to stick with either a da/rotary and to try and master it before moving to the next thing.
@improvedgarage22 күн бұрын
Yea I agree bouncing around when you're starting out is not the best way to learn. Im not sure how long you've followed my channel and I know you and I will never agree on what a 5" should be used for, but Ive been paint correcting with a DA for the better part of 10 years and am able to get great results with any DA. Yvan has been talking about the rotary for almost two years when most others never mention it and I wanted to see what it was all about and show people they don't have to be scared to pick one up.
@1thechosenjuan121 күн бұрын
@@improvedgarage definitely don’t have to be scared but they should be careful since rotary is far less forgiving. Much easier for mistakes to occur.
@improvedgarage21 күн бұрын
@@1thechosenjuan1 I definitely agree with you!
@stevel388123 күн бұрын
I bought the pressols for just the bottle. I put on the ik 360 sprayer heads and I think they look great. With your help I put on my own labels.
@user-lr6ie4wx4q23 күн бұрын
Too much grease in your gearbox. That’s why it’s stopping so fast. The housing does not need to be full to the top. You actually had grease squeezing out as you tightened the hosing basket on the machine. Only should fill it to where as you put the top on the bevel gear gets some grease on the teeth.