I tried this with my Epson WF-2760. I am now getting nothing at all. It appears that no ink is flowing to the paper at all. I did Clean the Print head twice and then did Print Head Nozzle check. NADA. nothing at all. Not a happy camper. Sorry, didn't work for me

How would this work with eco tank refill tanks

what about for eco tank

Please do not use water in your printer! - Use isopropyl alcohol through a syringe. This unblocks blockages quickly and safely.

You have Disney princess eyes 👀

What about epson cx7800 cartridges. I don’t see an air hole on my refilled cartridges please?

I tried 2 steps and not on to the 3rd one. Nothing ink is coming out and I'm using my for eco solvent. So I'm hoping the last step work! Fingers crossed 🤞

I don't get the printing properties pop up. Just a print preview

Envelope distort changed my life thank you

Your procedure + crossed fingers + prayer = Thanks for the miracle! This worked on my Epson WF 2750 (non-sublimation) printer. I hesitated to drop hot water, however carefully, into my printer, but decided why not? Epson had already advised me to buy a new printer vs. 0:02 pay to repair it at the nearest facility, @300 miles away. I appreciated their logic. In fact, I felt like a mad scientist without a clue, following the steps you recommended. But it worked. Thanks again.

What did u click on when u exported?? i tried to see but u didnt mentioned it, and then the export window comes out with your files

My Epson cartridges don’t have holes in the top (or anywhere) like your do!?!

Are you married????…( I need a knowledgable person like you around all the time 😂)

I'm going to try that immediately. Thank you

Hello! I have an Epson 2400 and it doesn’t have this feature what else can I try?

Same exact thing happened to me and now that I got that part figured out I need to try and figure out the ICC profile stuff bc my colors are not good especially when I press my tumblers

Can I convert my espon w-3540 printer to a dtf printer ?

To add to it iam gunna print something with lots of color and black every week,id rather waste a lil ink then go thru this again

Thank you so much!

Thank you so so much!

I was thinking about trying this myself, but I had a couple questions. I know converting to sublimation ink voids the printer warranty, but does it also damage the printer head? I've heard some people say their printer needed a head replacement 3 times in 6 months, and another who said their printer head was fine after a year. My second question is what do I do about my images that contain white areas? Since there's no white ink and I'd be printing on film, I don't want the white areas to just become transparent, because the color of the fabric might throw off the way the image looks. Is there any way around that or is there something I don't know?

Great job. Thank you

Hi, love the video; great tutorial! I'm trying to make an artboard like yours, since I have multiple product types (mouse pads, magnets, etc.) that use the same design. I would love to speed things up by just updating one object for all of them at once. I already created some mockups as separate PSD files, and am trying to combine them into an artboard. Resources I've found so far say that you need to copy the same smart object into each artboard if you want to update them all at once. Does that mean I need to redo all my warping/adjustment stuff, or is there another way to do this? (If you ever make a tutorial on that, you'll be my new favorite person, lol.)

Hello I just converted mind today and I ran into the same problems but before I seen this video. My instructions told me to let it sit for 24 hours before using it agai I would like to know. Did you ever figure out how to fix the problem? Thank you.

Awesome! Cyan was not wanting to cooperate. This did the job. Thank you.

Finally! My Cyan ink is printing!!! Thank you so much for posting this video!

It worked thank you so much 😊

This actually worked for my epson 1430 printer I use to print out film positives for screen printing. My mind is blown! Thank you so much for this!

I had the same problem on my Epson XP5100 (no printing even with new cartridges), I tried all the possible fixes I could find on KZfaq, none of the fixes worked, I ended up trashing the printer, no more Epsons for me, probably going back to H-P.

Let's try this on my WF-2650 that has been sitting for 8 years. There are no expectations that it'll actually work, but if it does, it will save me from buying a new printer.

Thank you! Got my printer up and running!

Tysm, I recently bought a used Epson ecotank printer off EBay and it probably wasn’t used in one or two years. I did the soak method (with cleaning solution instead), the air filling with the syringe, then two power cleanings (I know it can shorten the printer life but printhead cleanings only messed up the ink even more), which got it working again.

Thanks so much for this. I have the Designer Edition so it didn't let me save as a png or jpeg. Instead, I had to (In Windows) use the snipping tool to save it as a png (or jpeg), then I could add to the Patterns folder in the Library. Thanks so much again for this very smart & clear video.😀

Does anyone know how to add a printable stroke or printable image to the design with out the cut.

Do you have a video on clogged print heads for this printer?

This video was excellent. I will have to try this out as my black won't print on norma; paper at all except if I select photo glossy paper.

fabulous!

Perfect. Straight to the point! Thank you 🫱🏼‍🫲🏾

Thank you for your video with your information to unclog the Epson printer. It worked great. I did all 3 options so as make sure that it fixed it. I was not aware of the purge method by pushing air/ink through the cartridge. THANK YOU!

The exact one I have at my school!

THANK YOU!!! I am not sure which one did it but working great now.

thank you ! Off topic but have you had trouble with silhouette and your older mac? i have that one as well but keep needing different versions of silhouette!

So glad you said this. It's a shame that people are good at selling but not designing will make so much money!!

Great! Thank you very much!

Thank you so much! Excellent tutorial on making mock ups.

Thank you for the video. I was able to follow your tips and saved my WF 2710 printer from being put into the waste bin. You saved me a big headache.

Could you see if the printer would do a 13inch x 23 inch print under custom size. If you could try it I would greatly appreciate it. thx

I would not bother registering the printer. When you put dye sub ink in it immediatly cancels all warranties.

Can I convert at Epson workforce Pro WF-4833?

Is a workforce pro , convertible ?