Worked to reboot it but seems to be taking a long time fetching the update
@WolfGaming-14Күн бұрын
thanks for the tip man it really helps.keep the good work up.
@johnmcdermott53282 күн бұрын
I’m an Irish citizen as I had obtained my passport by proving that my mother was born in Ireland. Now my kids would like to get their passports. Can they use my poor do they have to use my mothers birth certificate? My father was also born in Ireland but I didn’t obtain his birth certificate. I was not born there and I obtained my passport after my 4 kids were born. Please help?
@SwitchedOnNetwork2 күн бұрын
Yes, they can just register on the foreign births register as one or more of their grandparents was born on the island of Ireland. See these links: www.ireland.ie/en/dfa/citizenship/born-abroad/registering-a-foreign-birth/ www.citizensinformation.ie/en/moving-country/irish-citizenship/irish-citizenship-through-birth-or-descent/#8ecd5f
@thepolacoxxl3 күн бұрын
Hey. I have done it other way round with cables and internet works good. So it doesn't matter ? (Inserted the cables to the connector with the clip up). Ping is good and download speed is sound... So?
@SwitchedOnNetwork3 күн бұрын
If it works it works 😅
@thepolacoxxl3 күн бұрын
@@SwitchedOnNetwork so basically these "standards" are all bs as long as you get it all mirrored
@SwitchedOnNetwork3 күн бұрын
@thepolacoxxl not quite... there are very good reasons that I won't get into in the comments (look it up) but in your specific home-user non mission-critical and non life-critical (I'm assuming) use-case then if it works ok I'd be happy to leave as-is 👍
@thepolacoxxl3 күн бұрын
@@SwitchedOnNetwork standards are made so that if the cable is faulty or cut and someone has to make a new clip it wouldn't be mirrored anymore. That's the only reason i can see. But it's logic if the cable doesn't work I would go on the other end and wire it as well same way...
@jakeea4 күн бұрын
Can this be used in a wall downstairs from the modem to upstairs just to extend a wire?
@SwitchedOnNetwork4 күн бұрын
Yes 👍
@jakeea4 күн бұрын
@@SwitchedOnNetwork thanks 🙏, can I ask what could possibly cause a speed of just over 600 mbpbs when I’m on 1GB connection. I’ve got one cable in the wall with the jacks on the wall. A cable from the modem to the wall. And a cable in the outlet upstairs. But can’t seem to get near 1GB
@SwitchedOnNetwork4 күн бұрын
@jakeea test if you get a good speed connected directly into the modem with a short patch lead, to rule the internal stuff out first
@jakeea4 күн бұрын
@@SwitchedOnNetwork yes mate. I’ve tested the cables around the main one in the wall and they’re working fine just when connecting to the two wall jacks. Just unsure what it could be
@dreamer08ful6 күн бұрын
You use a round pen to straighten them 🤣
@LukasHartl-ei2od6 күн бұрын
Amatéři 😂
@FaroosiFN7 күн бұрын
Do I need 2 network switches or only one?
@JustLinuxManКүн бұрын
Just one, which should be next to your router for Internet. Just make sure you can plug in your PC in whichever room you're in too!
@SwitchedOnNetworkКүн бұрын
It depends on how many devices you need to connect at the other end. You might need a second switch if you want lots of devices going back to the main router over that fibre link
@stanyinfinity8 күн бұрын
looks like temporaary solution, not a hardware fix.
@SwitchedOnNetwork8 күн бұрын
It's a workaround, as per the video title
@calebsAviation20098 күн бұрын
Thanks so much. I got a oldish android that is well know for rhis problem. It is so annoying because only the very top at a angle of the power button makes me turn my phone on and off. But all I have to do now is lift up my phone to turn it on and double tap the screen to turn my phone on and off😁
@miguelemarcela10 күн бұрын
Just equalize nest audio (A)
@nian127110 күн бұрын
No rj45 no holes that's why i can't put the wires inside
@deightonbrunson498411 күн бұрын
Thank you, beautifully done video explanation of the topic.
@PhirupShih11 күн бұрын
lol
@Maxtorym12 күн бұрын
Does cross cable still work with cat6.
@spottyfairies13 күн бұрын
Thank you! you've just sorted my life and wi-fi out :D
@muhammadhafizh879914 күн бұрын
What are the names of the tools for cutting the cable?
@SwitchedOnNetwork14 күн бұрын
I call them snips, or cable cutters.
@hofmann_2516 күн бұрын
that isnt cat7. No grounding
@DF-ct4fe16 күн бұрын
If someone else finds it, they just have it now because there is no way to contact them or for them to contact you. Its utterly useless if you lose a tile because you cant get it back.
@SwitchedOnNetwork16 күн бұрын
Have they stopped the service where you scan the QR code??
@DF-ct4fe16 күн бұрын
@@SwitchedOnNetwork On the more expensive ones yes, but the old ones they don't.
@7609716 күн бұрын
Please do not say again " it's very easy" since I have look it up for hours feel I am so stupid.
@SwitchedOnNetwork16 күн бұрын
Don't feel bad, it might have changed since this video was made years ago
@7609716 күн бұрын
My google home interface dose NOT like the one you have. Very upset
@note_0717 күн бұрын
But if it powers off, how do I turn it back on? My power isn't functioning anymore
@Spidermanisagoodmovie17 күн бұрын
MINES LOPSIDED I DONT KNOW WHAT TO DO
@kaushalrathod172317 күн бұрын
Thank you thank you thank you so much...must try before going to the repair shop to change the whole charging port... You need a thin needle, good light and patience to clean that hard layer of dust.... Once again thank you so much❤
@roverslambean345218 күн бұрын
Thanks man !!!
@SwitchedOnNetwork18 күн бұрын
My pleasure, hope it's helpful for you!!
@onzkicg19 күн бұрын
Hi, I got wall port, tester shows skipping 3,6,8 on both master and remote. Could that mean just a loose connection inside?
@SwitchedOnNetwork19 күн бұрын
Strange for it to be on both 🤔 does the tester work ok on another patch lead?
@RedTheSaviour0119 күн бұрын
how do I do this with just a knife asking for a friend XD
@SwitchedOnNetwork19 күн бұрын
Don't 😉
@RedTheSaviour0119 күн бұрын
@@SwitchedOnNetwork :(
@NaturopathMD19 күн бұрын
Thanks mate, worked with the volume UP button instead. But Thank You.
@davidtwomey593719 күн бұрын
I had everything I needed to aplly in December 2016 and have decided to apply now, My father was born in Clonmoyle East in the cottage his father built. The last item I needed was my father's birth certificate, I was surprised that it say Birth certificate in both languageswhich I expected. I fly to Dublin on Tuesday 2 days from now but after ready online have decided to wait until I'm in Sheffield (my hometown). I hope many watching this successfully get their Irish passports, it's a wonderffull place.
@neasuas400419 күн бұрын
2024, use a lot of Ethernet for my job, very helpful video thank you
@SwitchedOnNetwork19 күн бұрын
Glad it was helpful! 😁
@ihasmax21 күн бұрын
People say pass through are easier but I’ve been struggling hard keeping them in order when sliding it on. I tried putting one wire in at a time and it was easier. Maybe that’s a bad technique but works well for me
@SwitchedOnNetwork21 күн бұрын
If it works well for you then it's a good technique for you 👍
@elrenato8222 күн бұрын
This is great content! I really needed to change my HD and since I'm not a technician but still want to do it myself, this video comes in handy. Thanks!
@enhompe226 күн бұрын
Can I splice fiber at home too? I want to move my ISP modem to the attic but I'm afraid I'll pull off the plug at the end of the fiber as I withdraw it through the in-wall tubing. So, I'd like to know that I can repair a broken fiber if necessary. Thank you.
@SwitchedOnNetwork25 күн бұрын
You can in theory, but you'd require the tools and expertise to do that - neither of which I have! 🤣
@mschwage26 күн бұрын
Great video. I’ll bet this lad says “rooter” for “router”. 🙂🇺🇸🇬🇧
@SwitchedOnNetwork26 күн бұрын
Of course I do, that's the correct way of saying it 😜
@penner_gluck27 күн бұрын
Saw the review, bought one before it finished. Thanks
@SwitchedOnNetwork22 күн бұрын
Awesome, hope you find it useful!
27 күн бұрын
Perfect video. Thank you
@Fnta_discovery28 күн бұрын
Did you internet connexion for that
@SwitchedOnNetwork22 күн бұрын
Yes, the Raspberry Pi needs to be connected either via WiFi or an ethernet cable into your network.
@omabah114529 күн бұрын
How weight are you? Is the panel door not get deformed?
@SwitchedOnNetwork22 күн бұрын
Not sure what I weighed when I filmed this video but I'm ~83kg at the moment, which is a fraction of what weight the door latch can handle so it's no problem :)
@Michael___054v29 күн бұрын
Get the lowdown on future developments in an exclusive interview with Binance's CEO
@monkeybaath2325Ай бұрын
@0:30 you are measuring 4cm with the tape measure, but you are saying “4 cm”…… which is the correct length to strip please?
@muthuselvamm1059Ай бұрын
Orange and white Solid orange Green and white Solid blue Blue and white Solid green Brown and white Solid brown.😅
@RhaheimHilliardАй бұрын
The only thing I don't see being used in the videos showcasing the pass through heads is the strain relief boot. Obviously, they're not mandatory, but they do give the cord a more "factory" style look.
@SwitchedOnNetworkАй бұрын
They also help to protect the little lever clip and stop it breaking off 👍
@NH590Ай бұрын
This was super helpfull, thanks
@witaliskubis6546Ай бұрын
simple quick the best. cheers.
@mumihpАй бұрын
Thank you so much for you're tutorial. I was able to wire 7 keystone jack and rj45 connector. Also for the link, just brought from Amazon, work very well. Tip, do not do what I did. When you wire the rj45 connector, makes sure the connector is facing down so the push connector needs to be facing down. I put the wire in but it was the wrong way around. Orange swipe is 1 and brown is pin 8. I did this for 7 wires so had to cut it off and rewire. When I used the network tester, the keystone jack and rj45 connector tested perfect... Light on from 1 to 8.
@One-_-Punch-_-FrogАй бұрын
Man thank you so much it actually work ❤❤❤
@johnmaldonado1795Ай бұрын
Thank you so much this video helped a lot to do it on my own the only video that actually helped me out
@SwitchedOnNetworkАй бұрын
My pleasure, glad it helped you!
@N5MOHАй бұрын
Thank you. A great video. You make it look so easy and it is now for me.
@SwitchedOnNetworkАй бұрын
Glad it was helpful!
@v0iTekАй бұрын
Prob one of the best tutorials of anything I've ever watched.
@SwitchedOnNetworkАй бұрын
Thanks! Glad you liked it.
@AndrewHelgeCoxАй бұрын
Do you have a video on connecting an existing bell which is powered by two D-cell batteries?
@SwitchedOnNetworkАй бұрын
I don't, sorry. Best way is to get a transformer and power it from the mains.
@AndrewHelgeCoxАй бұрын
@@SwitchedOnNetwork I think I would also need new chimes that were compatible with AC.
@SwitchedOnNetworkАй бұрын
Ah maybe. Not sure sorry. I don't have any actual chimes, it just rings on all our Google home speakers and our phones so that's enough for us.