Hey, I'm buying this, the Cyma CM360LM, the metal one. I also ordered the shell holder for it's side and a sling, it will arrive in a few days, thanks for the showcase I'm super excited.
@2lbsTrigrPull13 күн бұрын
12:50 The CYMA 74 Midcap work really well in mine. I'm using LCT mid and low caps for my E&L 74 too. In my E&L AKM only LCT plastic mid and low caps work.
@MagicKnivesGaming13 күн бұрын
Yup, same story here, I realized that in order to match the look of the original mag, Arcturus AK74 mid cap was the best option
@pavinvatanavikrom205517 күн бұрын
is this a single layer lens version or a double layers lens version, is it fog up easily? and did u try the durability test, shoot it with bb in close range? thx for reply
@MagicKnivesGaming17 күн бұрын
@@pavinvatanavikrom2055 single layer, doesn’t fog up easily, and yes I’ve shot it point blank with my pistol, no issues, there’s even a few videos on YT with HPA rifle with about 2 joules shooting it point blank, no cracks of sorts
@pavinvatanavikrom205517 күн бұрын
@@MagicKnivesGaming thx for info, really appreciate
@2aheen18 күн бұрын
Do you currently still work at brinks?
@MagicKnivesGaming18 күн бұрын
@@2aheen yes
@2aheen18 күн бұрын
@@MagicKnivesGaming okay, I just got my guard card. Living in CA. Taking my firearms test in a few weeks. Seems like a cool career. 22 right now and looking to get into this type of work, so we’ll see what happens
@mav420924 күн бұрын
Do you have an airsoft shotgun? You can put a piece of tape on the door as a lock and then open it with the shotgun.
@MagicKnivesGaming24 күн бұрын
@@mav4209 that’d be a cool idea 🔥😌
@verdugo797429 күн бұрын
I have this same gun, and the stock has a little side to side play while unfolded (about 1mm of play) Do you have the same side to side play in the stock?
Do you recommend this replica currently I have an ak 12 lct
@MagicKnivesGamingАй бұрын
I think for what you’re getting, it’s pretty good 🔫🔥
@2lbsTrigrPull14 күн бұрын
Compared to the real deal it's still crap quality but compared to other airsofts it's better which is quite sad but that's the reality.
@MagicKnivesGaming14 күн бұрын
@@2lbsTrigrPull I’d consider E&L a middle tier, as opposed to brands ljke LCT, Arcturus
@2lbsTrigrPull14 күн бұрын
@@MagicKnivesGaming Oh... my LCT AK-74MN was worse than the E&L AK-74MN... But everyone has different experiences I guess. 😁😂 My E&L AK came already with Mosfet and tuned internals so I guess in that department it was at least as good as any other AEG with all the bells and whistles.
@MagicKnivesGaming14 күн бұрын
@@2lbsTrigrPull my lct akm didn’t have a mosfet either, even when I installed one, I had to change the motor cuz the stock one kept burning out the mosfet, now it runs super smooth, but E&L out of the box works decent, but I would still upgrade a few things off the bat. LCT has good externals, some internals should be swapped out
@StootWortsАй бұрын
Been having these exact issues with my EMG Pit Viper, thanks so much for the help! I'm gonna try these fixes soon.
@MagicKnivesGamingАй бұрын
@@StootWorts glad I could help, yeah unfortunately this is a common issue with the EMG 2011’s
@kip.airsoftАй бұрын
This is awesome. Appreciate the righty AND LEFTY demonstration😜🙋🏻♂️
@MagicKnivesGamingАй бұрын
@@kip.airsoft thanks man 👍🏻, gotta learn how to do it both ways 🔫🔥👍🏻
@ivansucic9149Ай бұрын
Crooked front sight post is a issue is there a way to fix it?
@MagicKnivesGamingАй бұрын
Oof, maybe just use a punch pin and a hammer to straighten it as much as possible, otherwise you can try getting another front sight post to replace it :/ 🤷🏻♂️😓
@ivansucic9149Ай бұрын
@@MagicKnivesGaming So if i punch out 2 pins on front sight post i can straighten it no problem? sorry im not a tech so this whole thing is werry new to me since im gonna do this miself
@MagicKnivesGamingАй бұрын
@@ivansucic9149 no, you will need to unscrew the front sight post to remove it, the side pins don’t really do much
@ivansucic9149Ай бұрын
@@MagicKnivesGaming here is what find out so far: i removed cleaning rod and looked front sight post from a bottom and there is no screw hole afther that i removed muzzle break and that is it no screw holes can you sent me a link to a detailed video on where screw are & how to remove front sight post on my e&l akm essential mosfret edition like i said im no tech guy and since my tech guy has no time to fix it im on my own :(
@MagicKnivesGamingАй бұрын
@@ivansucic9149 the front sight post is adjustable, you just need to unscrew it to take it out from the front sight itself. Like take a plier and just unscrew it from the top
@THEgopnik35Ай бұрын
Beauyfull,whats the name of that rail?
@MagicKnivesGamingАй бұрын
It’s an LCT AK railed dust cover. Although I had to modify it by putting a piece of shim underneath and have it stick out slightly at the front so it could fit and lockdown onto the gun. This just made battery installation and removal easier and also allowed me to not have to remove the rear sight which is always a huge pain in the ass to do on an AK
@THEgopnik35Ай бұрын
@@MagicKnivesGaming i mean the one with the PEQ15 and flashlight brother
@MagicKnivesGamingАй бұрын
@@THEgopnik35 ah my bad 😓🤦🏻♂️, it’s a tri-rail barrel mount by Tufforce: tufforce.com/special-sales/tri-rail-barrel-mount-fit-barrel-dia-13-18-mm-suit-for-ak47-usa-kr-103-vz-58-hk-sks-rifle-its-variants-rifles-tufforce-unique-design/
@THEgopnik35Ай бұрын
@@MagicKnivesGaming thanks buddy,your ak is so pretty,good job 🔥
@MagicKnivesGamingАй бұрын
@@THEgopnik35 Thank you man :)
@MasterAdamoniaАй бұрын
Is the same true for SaberTrio heavy duty neo pixel blades?
@MagicKnivesGamingАй бұрын
Any neopixel blade, you are taking a risk if you start going heavy dueling…
@MagicKnivesGamingАй бұрын
UPDATE: I realized after the tracer unit fell off under recoil, I just had to remove the original O-ring on the muzzle adapter, and it would fit onto the barrel more snug
@Debbiebabe692 ай бұрын
Top rail - 3-9 scope. Bottom rail - M203.
@7622 ай бұрын
How did you mount it to the side of a barrel? Which mount did you use?
Yeah but it isn't the Ambassador! 😂 Yeah I'm sorry I used that joke here. 😔
@Dwayne_LaFontant3 ай бұрын
As long as you don’t put ever single fiber of your being into your swings you will probably be fine. If you’re gentle you might be fine.
@samkamyafes21393 ай бұрын
is it metal and how much kilogram?
@MagicKnivesGaming3 ай бұрын
Yes it’s metal, and it’s about 3.73 kg
@Slammedf184 ай бұрын
Hey man great video, can u lock the bolt back and use the bolt catch with this? If so how do you?
@MagicKnivesGaming4 ай бұрын
Unfortunately you cannot
@MagicKnivesGaming4 ай бұрын
UPDATE: if you fill BBs directly from the top, you will get, 31 rounds into the magazine
@Axmorn4 ай бұрын
Thank you so much for that video. Almost thought I had a faulty model.
@dadapik4 ай бұрын
You have two iron sights right and left of the central hole
@tyler17684 ай бұрын
What most do with real version is basically instinctive fire takes alot of practice and just tuck the stock or brace it hard agasnt shoulder
@MagicKnivesGaming4 ай бұрын
Makes sense, thanks for watching 😌
@daviddunca-zx5vj4 ай бұрын
I have the same but the platinium you think i can but a red dot on this?
@MagicKnivesGaming4 ай бұрын
Definitely, you just got to get the side rail adapter for it
@GeneralGiffel4 ай бұрын
Where did you order this? Every version i see uses mini tamyan and no mosfet. I am looking at one on Evike Europe.
@MagicKnivesGaming4 ай бұрын
At Gear Up airsoft
@GeneralGiffel4 ай бұрын
@@MagicKnivesGamingThank you! Great review.
@davidlanglois6774 ай бұрын
What parts can be used to upgrade the sr24?
@MagicKnivesGaming4 ай бұрын
Hopup and barrel I believe can be upgraded with TM spec parts, but that’s as much as I’m aware of
@davidlanglois6774 ай бұрын
@@MagicKnivesGaming I will rephrase my question I would like to do internal upgrades on the sr24 which part is compatible with the sr24? parts of vsr10 parts of m24? because I can't find any information on the subject
@MagicKnivesGaming4 ай бұрын
@@davidlanglois677sadly I’m not familiar enough with the platform to give you a solid answer as this is not my gun, the best I can say is you’re fortunate enough to have both guns side by side with the internals, and see which parts are compatible, as far as I can tell though, the only major difference is the type of magazines they use. I prefer the sr24 cuz you don’t have to worry about losing bbs everytime you take the magazine out
@davidlanglois6774 ай бұрын
@@MagicKnivesGaming all good raven evolution response me and its a vsr-10 tokyo marui fit for internal upgrades :)
@gregoryfranks73474 ай бұрын
that mofo makes me smile just like you. if you look at your video, your face turns to a crazy smile as soon as you reach to pick it up.LOL I have one as well and I do the same thing just thinking about it. did you know this is the only true 1:1 Mac they make. others are similiar but none is true to the original. do you have any issues with proper lubrication. they say and I have had problems with too much or not enough. the nozzle spring on mine fail and leave the nozzle unable to return all the way back. i am very lucky and have a brother who was smart enough to buy as many full auto guns before they were banned in 1986. only real steel full autos have to be registered as pre 1986. he has a Mac that we shot once and it was the coolest gun ive ever shot. better than his mp5 more fun because its so fast and spits 24" flames. this kwa feels exactly like the real one except its about 12-16 oz. lighter. the real one has so much recoil to shoot it like a pistol is difficult because it rises up so fast it very very difficult to stay on target after 5 rounds without correction you will always be above the target. this is the hands down most realistic EXPIRIENCE to using a real one. take how this feels doing a mag dump and multiply the feeling , the aggression and the joy by about 15. that's a lot but to truly understand how violent these things really were 15 times is reasonable to equate it. my kwa often doesn't empty a full mag before it runs out of gas. semi is decent for such a short barrel but it is so finicky. I have not replaced the nozzle system with upgraded parts yet so it doesn't always work after the first use once its fresh lubed and cleaned. im a kid from the 70'-80s so this has always been my favorite smg. your video was so informative with a great bit of detail because you have used enough to give a good idea of what someone should expect. I appreciate that. outstanding job. check out others if want to see the scale of other models. also Mac 10's are so different in size if your not familiar check out the difference and how awful the Mac 10 looks compared to this. again great video. thanks cheers
@MagicKnivesGaming4 ай бұрын
Glad you enjoyed my review! Yeah I realized there haven’t been a lot of reviews on this gem, so I figured I give it the proper respect it deserves. I’m almost scared to take it apart/shoot it too much cuz since there doesn’t seem to be a lot of aftermarket parts, I really don’t want to risk breaking this piece. Either way it’s a fun gun to shoot, even if it’s not the most accurate, but I’ll def try to play with this once I can get a tracer/tracer adapter for it 🔫💥☄️
@gregoryfranks73474 ай бұрын
@@MagicKnivesGaming you shouldn't be afraid to strip it down there's plenty of videos that show exactly how to how to do it and a little tips to help out as well as it should have come with a little bottle of lube use that lube and just kind of test it out starting with the small amounts just on the areas that it tells you to and if that doesn't you know keep it working good just add a little bit more the next time as long as you keep it lubed and clean it loves to shoot I wouldn't be worried about shooting it too much I'll try and look up the place where I found some aftermarket stuff for it and I'll see if I can send you a link
@gregoryfranks73474 ай бұрын
@@MagicKnivesGaming you seem to know the things that will instantly break it like leaving no room for the follower as well as making sure the bolt is open to put that mag in a lot of people forget that and they just jamming in there and Break Stuff I'm glad you think it's as cool as I do
@MagicKnivesGaming4 ай бұрын
@@gregoryfranks7347 yeah, well as long as I can follow what they said, and plus trying to keep this thing lubed without having to take it apart just seems like a huge headache 😓😓, but yeah, I hope to keep it running for as long as possible
@MagicKnivesGaming4 ай бұрын
@@gregoryfranks7347 sounds good, thanks for all ur input 👊🏻🔥👍🏻
@rogersurian45164 ай бұрын
Wow! That's great....
@Gorillamarine4 ай бұрын
found you
@ivanbobrov_4 ай бұрын
Great rallying and thanks for the review
@MagicKnivesGaming5 ай бұрын
IMPORTANT UPDATE: The rear sight issue has been fixed. It was mainly due to not having the proper screw to hold down the rear sight; NO MODIFICATIONS REQUIRED. The V3 Glock 18c slide requires a M2.5x12mm phillip screw. You can find some on Amazon along with the nut as mentioned in the video.
@Takedownairsoft15 ай бұрын
I had to change the battery, the red dot was immediately more visible and way better. It’s not a bad sight.
@sniper321fire3 ай бұрын
Good to know as I am getting the Umbrella corporation M4 with this red dot soon
@CouldntThinkOfNam1005 ай бұрын
have you found an iris that fits this?
@MagicKnivesGaming5 ай бұрын
I have not, mainly since I don’t use one for my unit
@rogersurian45165 ай бұрын
Hi bro Greetings from Malaysia. Really appreciate you good review...Just want to ask what is the actual BB size to be use? Is it 6mm or 9mm please? Thank you.....
@MagicKnivesGaming5 ай бұрын
6mm. 8mm airsoft guns are extremely rare now
@rogersurian45165 ай бұрын
Thank you so much bro, Look forward for your next videos.....❤
@gavinchetwynd32745 ай бұрын
Thanks a lot help soooonmuch 😊
@MagicKnivesGaming5 ай бұрын
Glad I could help 👍🏻😌
@abesview58555 ай бұрын
Do you find yourself using the IR flashlight or is the IR light on the PEQ enough IR for most usage? Im debating buying this PEQ-15 with IR illuminator or a NGAL without Illuminator but with a dedicated IR light on the side. What do you think is better?
@MagicKnivesGaming5 ай бұрын
I personally so far enjoy using both IR laser and IR flashlight in combination just cuz it has that feature like on the real thing, but I’m sure with enough ambient light, you could get away with just the IR laser with most situations, I think the IR illuminator just helps with giving you better confirmation of what you’re shooting at
@abesview58555 ай бұрын
@@MagicKnivesGaming Is the IR illumination from the PEQ enough? Or would you say the IR light is also needed?
@MagicKnivesGaming5 ай бұрын
@@abesview5855 I mean say so, but you need the IR laser to aim with, cuz depending on ur setup, it’s hard to aim with nvgs
@abesview58555 ай бұрын
@@MagicKnivesGaming How's the IR laser and IR illuminator together? Enough for real steel just plinking? Or is somogear 500$ one better?
@MagicKnivesGaming5 ай бұрын
@@abesview5855 I don’t have any real steel to test it on, hopefully someone with real steel can test it out, but I honestly wouldn’t be surprised if it could withstand real steel recoil
@TacSoft6 ай бұрын
Hey man, I was just wondering what the FPS is on this gun also, how well does it shoot?
@MagicKnivesGaming6 ай бұрын
Given it’s made in Canada, AEG’s always chrono around 400fps, and for a beginner budget airsoft gun, it’s pretty decent, we use these as one of our rentals at Solely Airsoft. That said I’d say eventually you’d want to move up to a full metal M4 with better internals
@TacSoft6 ай бұрын
Thanks I appreciate that
@MagicKnivesGaming6 ай бұрын
BOOK YOUR SHOOTING SESSION AT: www.solelyairsoft.com
@MagicKnivesGaming6 ай бұрын
BOOK YOUR SHOOTING SESSION AT: www.solelyairsoft.com
@MagicKnivesGaming6 ай бұрын
MAGAZINE UPDATE: After weeks of trial and error, and frustration, I finally found the most ideal AK Midcap to use which was the Arcturus AK74 Variable Midcap magazine which provided a perfect fit and excellent feeding.
@redboy17776 ай бұрын
I honestly prefer base lit over Neopixel
@Krmt13377 ай бұрын
Why would you get vintage gun like a lct akms to put big ass torch and T1 with riser on it😭😭😭
@MagicKnivesGaming7 ай бұрын
lol, to have the best of both worlds 😝
@Krmt13377 ай бұрын
Yeah but why, if u want tacticool make it zenitco it will turn heads on the field all day long,you want wood? Keep it simple or at least use correct atachments for a 60+ years old gun You buy pretty expensive gun and kit it like this.. shits like an onion, makes me wanna cry bro.
@MagicKnivesGaming7 ай бұрын
@@Krmt1337 lol go cry then 😂👍🏻
@azarhuseynli30257 ай бұрын
Thank you very much for the amazing video! I want to ask if the Dan Wesson revolver shells mach with King Arms .357 Python 6 Inch Revolver?
@MagicKnivesGaming7 ай бұрын
Unfortunately no
@MengTheCat1417 ай бұрын
Is it the same slide lock as the EMG TTI JW4 Pit Viper? Or its different
@MagicKnivesGaming7 ай бұрын
I wouldn’t know for sure since I don’t own or ever handled the Pit Viper, but I would assume it is, or at least interchangeable.
@MengTheCat1417 ай бұрын
@@MagicKnivesGaming ah ok man ty for the info👍❤️
@CleverTricksGames7 ай бұрын
Dude that is so sick. You definitely a natural. I've never done airsoft so you gotta show me the ropes. What an awesome setup you cats did some fine work.
@MagicKnivesGaming7 ай бұрын
Thanks so much bro! I couldn't imagine being able to run my own airsoft place. And definitely you should come make a visit and I'll try to give you a proper instructional :)
@TannerWatkins047 ай бұрын
Hey man if you dont like it ill take it off your hands for you lol im looking for one to start collecting plus i love the walking dead
@MagicKnivesGaming7 ай бұрын
lol thanks, but I sold this long ago…
@jordangamble35157 ай бұрын
I notice most don’t use inside out on ao tennis
@MagicKnivesGaming7 ай бұрын
Yeah, there’s honestly no point to it, since you can hit inside outs without it
@jordangamble35157 ай бұрын
@@MagicKnivesGaming true but it does make a difference like if your coming from the right towards the left with a righty your guy will actually open up his hips towards the right and try to hit the back right corner. You get a better animation with it. The ball just has to be hit opposite corner your standing in and you have to anticipate it’s going to happen so you can hustle over a bit to get ready for it
@Crazyedits293827 ай бұрын
Yoo remember me santiago from tennis classes with the brother abd sister they where Philippino