I just bought the freestyle and I can’t bind to my e8 radio please help!
@MyTube4Utoo3 күн бұрын
Thanks guys.
@UserWasBannedForThisPost5 күн бұрын
I tried a JX CLS6322HV, but it sometimes vibrates when centered at 1500us, on light load. Have you seen this issue with other JX servos? I think it maybe due to the dead-band being only 1us, instead of 2us. Or maybe, it’s the coreless motor. Not sure if this is a major issue, or just a JX quirk.
@BeachbumfromBrick6 күн бұрын
This I can pop in my cc2500 and it adds what I NEED ? Elrs addition?
@gliderrider7 күн бұрын
Do these have sound on altitude and vario functions?
@destroytheilluminati7709 күн бұрын
my issue with the DW edge,, 3 of 4 pushrods for control surfaces too short, leave landing gear off, its too flimsy and you will be bending them back into shape after every landing. install your wing 1st and make sure its squared up/level, you will find the slot for the stabilizer is out of whack and needs to be tweaked/cut/sanded to assure its level/square with the wing, i did the opposite and had to cut it back off to get it level with the wing, i feel the stabilizer/elevator could be a couple inches longer
@gliderrider9 күн бұрын
You guys had something going with that pocket / drone combo with the updated pocket and bonded drone. I’m not even a drone guy and I wanted that. But I was late!
@herotrojan164510 күн бұрын
Thanks guys your video helped me to be confident in open the nazgul i just bought.. my analog video is very bad.. even my mobula 7 and 8 perforn better.. seems like i need to replace the pigtail antenna maybe
@ronaldtesorero834612 күн бұрын
Can it work with a futaba t6j tx and a R2006GS RX?
@paulmazan490913 күн бұрын
This video did nothing to show me how it is crash proof. I have had three RC planes and have managed to roll all three into a ball. I’d be a lot more impressed if you had a novice fly it
@ErikLavr14 күн бұрын
Does the CC2500 have frSky D8?
@16-BITFPV15 күн бұрын
I really wouldn't mind if my TX16S had two more switches. Preferably two position longs somewhere.
@john966318 күн бұрын
Great video in lifting the fog around these new receivers.
@armenvegas19 күн бұрын
Hi will this work a spm9645 sat rx?
@HoundDogMech20 күн бұрын
Again U did not say what Firmware U are using it's very important to say because 3 to 4 years from know when someone is trying to learn they are FKKED.
@HoundDogMech20 күн бұрын
Find Value ??? U guys are just like all these other EXPERTs U set up a blank Model but failed BIG TIME to explain it. Not going to watch thru or subscribe because as a newbee i'm sure even slowing the playback to 50% U won't explain every step and I and others will be wasting our time.
@john966320 күн бұрын
Great video. You demonstrate how an experienced pilot can "throw" this all around. I am thinking of this to learn 3D. Perhaps you could demonstrate how/why this would be good for a newb to start with. "Gentle" characteristics? slow flight capabilities? easy recovery, etc., etc., or whatever characteristics a beginner should look for. Expert pilots are great but not sure how this translates to us beginners. Very well-done video. Thank you. All the best.
@graysonhobby20 күн бұрын
Thank you for the suggestion we will work on that video
@deanedeane431822 күн бұрын
Very nice review !!! Im about to maiden my shining !🙃😉 NZ 😎
@andyMSH70024 күн бұрын
needs to say elrs printed on the box that your 4 in 1 radiomaster tx came in...aparently it will not be able to be converted otherwise.
@annijeoma128425 күн бұрын
How much does fpv receiver cost
@darrenwhite352126 күн бұрын
what if i plug in with no battery and then get nothing within edgtx buddy??
@sotm607828 күн бұрын
Are there any options to replace a three position switch with a 2 ??
@FlyingBuzzard28 күн бұрын
Every time any new comes out I see various people reviewing the product in one day. today I see on my sub list 8 different vids about this radio I still use the original Jumper T8SG radio ( Black and silver one ) for my quads and still use a DX9 Spektrum radio for all my fixed wing aircraft. I did buy a Zorro awhile back but have never used it yet. As my little Jumper still operates well and has no issues, why change Same with my DX 9 works flawlessly and I see no need to use anything else all these constant radios. RX's and goggles etc etc ever changing, ever updating yada yada for me is just not worth the $$ to have to fool with So many see a New shiny thing and they just have to rush to get it And so many YT guru's get theirs free make reviews because they do and others buy stuff on their advice only to learn it is not what they were told by those reviewers . You guys have always been honest and upfront with reviews and products you sell I appreciate that, but i am still not into buy the "new" thing until it is out awhile and the normal users start talking about the product and how it performs on a everyday basis but I am still not into the "new" just because it is...LOL
@ronlawrence989029 күн бұрын
How to recover my RadioMaster Zorro if I really screwed up and Deleted not the SD card but the other internal memory firmware? Display no longer works and radio won’t turn ON.
@MountaineerFPV29 күн бұрын
These are DEI controllers 😂
@seanmck932629 күн бұрын
Love the acting, it was like I was watching an Oscar winning film!
@graysonhobby29 күн бұрын
We do work hard getting into character lol
@Roeland5432129 күн бұрын
The Surpass Hobby engines are very powerful, I have it in a Yak 11 Reno racer from Amewi (Hobby King). The original Hobby King motor had in no time loose magnets. The Surpass Hobby motor is lasting already a long time. Top quality for a reasonable price.
@graysonhobby29 күн бұрын
Thanks for the info!
@Darkvamp6929 күн бұрын
I got the zorro 4in1 and a tbs crsf external module and it won’t fly nothing still ?
@Okabae29 күн бұрын
I love the Radiomaster Radios, they are top notch quality. But I feel they are a bit of a copy cat. Happened with the Jumpter T18, which came before the (better) T16x. And now they are copying the color scheme of the Jumpter T15... whereas the T15 has the full color touch screen. Lets see if Radiomaster copies that too.
@kardady29 күн бұрын
Woooow! 😄🤘🔥🔥
@alfiramos856629 күн бұрын
$$$
@jundelfintvhobbyАй бұрын
Hello sir can you help me i can't bind the hsp receiver to my mt12 , receiver is RX-G3 HSP BRAND.
@KAJBSАй бұрын
Will this work with my DX9 ?
@DanPRCАй бұрын
Good detailed instructions but unfortunately my laptop won’t find that bootloader.
@graysonhobby7583Ай бұрын
If the bootloader wont detect without a battery installed still, you can try running a program called "impulse rc driver fixer" and see if it will auto install the necessary drivers to detect it.
@DanPRCАй бұрын
@@graysonhobby7583 Ok thanks! I’ll try that this evening.
@DanPRCАй бұрын
@@graysonhobby7583 It worked!! Thank you very much!!!!
@BPMACMAN28 күн бұрын
@@DanPRC My laptop wont find bootloader either
@poobah18726 күн бұрын
My desktop does not find the bootloader either
@manski209Ай бұрын
You guys are awesome, thanks for the heads up Will.
@andymarcelin9578Ай бұрын
first check the box of your radiomaster came as it has to state elrs on the box before it will work with the standard 4 in 1 which will NOT accept elrs .... crossfire option on radio will just hang on that screen.
@old-rcplane-phartАй бұрын
I'm still using 2.8 on my tx16s max2 (AG01). If it works 🤷♂️😁
@old-rcplane-phartАй бұрын
Whom-ever invented the tx16s & mt12, I hope they have more $$$ than Horror-izon ever has in their lifetime! They (he/she) deserve it! New tx coming out from HH. It utilizes opentx🤷♂️🤯! MAY be ELRS too. I can't seem to get a straight solid answer yet
@thegrafxguy1Ай бұрын
sweet!! thank you for this! i've done it on my tx16 but it's been forever.
@graysonhobbyАй бұрын
Glad it helped!
@old-rcplane-phartАй бұрын
There's a v2.10 available for tx16s
@thegrafxguy1Ай бұрын
@@old-rcplane-phart thanks! Haven't flown in quite awhile. I'll have to update everything here soon as I plan to get back into it.
@vinnyp8574Ай бұрын
What about if the elrs has a binding phrase ???
@user-pj1cz7vr9qАй бұрын
thanks, guys useful and funny )
@PaulMills-gh7krАй бұрын
Great job on the video
@johnj7474Ай бұрын
TL is not Telemetry. daxdadog is correct. TL refers to “Throttle Lock” not telemetry. It is a function that alters fail-safe behaviour. There are two user-set fail-safe options set by Throttle Lock (TL = On/Off in the TextGen menu). User-set fail-safe operates as follows if transmitter signal loss is detected by the receiver: 1) If TL is ON, for the first 0.1seconds a series of Throttle OFF commands (-100% on transmitter channel 1) is sent, then all channels go to logic low. That is, no servo pulses are sent. The effect of this is to force the ESC to zero instantly, then stop servo pulses. This is because a few ESCs will run the motor briefly when signal is lost if the last known throttle channel value isn’t -100%. On a normal electric model the motor stops instantly and the control surfaces will stay where they were when signal was lost while the receiver rapidly looks for a valid signal. If found, full control is restored. After 2 seconds, if user-set fail-safe is set, then the receiver will output user-set channel values to all the connected servos/ESC indefinitely until a radio signal is found. 2) If TL is OFF, for the first 0.1seconds then all channels go to logic low. That is, no servo pulses are sent. In almost all cases on a normal electric model the motor stops (as the ESC detects a loss of control pulses) and the control surfaces will stay where they were when signal was lost while the receiver rapidly looks for a valid signal. If found, full control is restored. After 2 seconds, if user-set fail-safe is set then the receiver will output all user-set channel values to the connected servos/ESC indefinitely until a radio signal is found. This option is for people like the glider guys who use channel 1 as a flight surface control and a sudden excursion to -100% could be fatal. If user-set fail-safe is not set then the receiver will in all cases output no pulses until the signal is restored. John
@daxdadogАй бұрын
I don't believe that the "TL" means telemetry on. I think it stands for Throttle lock.
@suspiciousstew-wz5mmАй бұрын
Can i have a drone
@suspiciousstew-wz5mmАй бұрын
Hey can I have a drone
@nirlachman007Ай бұрын
How do I know if one Lemon Rx gen 2 has this feature ? Does it have a different part number or something?
@franciscoarzu8120Ай бұрын
Seems like the model numbers are the same, but check if you are getting the TextGen menu. Seems like the TextGen edition firmware is dated April 2024, so really recent
@jacobreezyfpv6287Ай бұрын
So i watched the video and im not sure if im not looking for the part correct but is there only the left side switch for sale or do i have to do get 2 and do a sauder switch with the switches
@markmiranda5644Ай бұрын
What version of edgetx and the esc script are you using? Im on EdgeTx 2.9.4 with the v1.1 script on a Gen2 7 ch Lemon RX and its not working.
@JosueRamirezBarrazaАй бұрын
do these have safe like spektrum recievers
@mytubehkjtАй бұрын
Does it finally have a 6s current sensor?? Or is it still limited to 5s?