My only apocalypse product arrived in bubble wrap and a black simple box. No spare hardware for it. Also tape blade
@hellojuggalos5 күн бұрын
yea that hardware i got was for my replicant lol. and the bubble wrap appeared to just end up crumpled in the corner. Apocalypse is stingy with the extras it appears.
@peterhenzsel3615 күн бұрын
First?
@ReverseFlipping6 күн бұрын
Have you ever used bbk?
@hellojuggalos6 күн бұрын
yes, i use their aliexpress store sometimes. Got my carbon fiber rep spacers from them recently and got the 2 of my krakens from them.
@ReverseFlipping5 күн бұрын
@@hellojuggalos there website is cheaper then kolisong
@peterhenzsel3616 күн бұрын
Kraken peak imo
@hellojuggalos5 күн бұрын
yea nothing beats it for value
@peterhenzsel3615 күн бұрын
I mean there is the tsunami, for me it does. Twice as much but it feels twice as good (yes I got mine for 120)
@Budgie_Flips6 күн бұрын
Ball-isong
@hellojuggalos6 күн бұрын
butt-erfly knife
@MaculinePower6 күн бұрын
Hey, Im planning to get this one. How does it flip? How Is it balanced? Thanks
@hellojuggalos6 күн бұрын
it's a great choice just watch that blade tip it will get you. It flips very well, impressively so i would even say. I would call it a bit of a handle bias. I just checked and the balance point appears to be slightly above the middle of the top speed channel. You are welcome.
@MaculinePower6 күн бұрын
@@hellojuggalos Cool, thanks for the quick reply! I will order one with the tanto blade next this weekend :) Am currently flipping a nabalis canyon... it pokes me regularly haha
@CrowFlips7 күн бұрын
Even if it is false edge bro did a bite handle double rollout for the first trick 💀
@DenDenBMX15 күн бұрын
Kotlin flip is crazy💀
@hellojuggalos15 күн бұрын
hehehe
@ReverseFlipping15 күн бұрын
that thing looks sweet
@peterhenzsel36115 күн бұрын
*gasp* latch drop aerial?
@hellojuggalos15 күн бұрын
searching now but i can't find one. also what latch?
@peterhenzsel36115 күн бұрын
@@hellojuggalos the latch drop is a trick where you grab the latch (or where the latch is supposted to be) and preform a quick draw in the ice pick position. I think people are used to the backhand aerial more
@hellojuggalos15 күн бұрын
@@peterhenzsel361 yea i found the latch drop but no examples of this latch drop aerial you speak of
@peterhenzsel36115 күн бұрын
Understandable have a nice day (i thought the latch drop aerial fits a bit more)
@ReverseFlipping15 күн бұрын
Nice
@peterhenzsel36118 күн бұрын
I have tuned my friends naut like once and it was at the point of being undersized. 2 minutes of flipping later it had no binding. I do not understand nautiluses
@Something2Nothing_brd18 күн бұрын
Nice
@Ignignokt177619 күн бұрын
i'd recommend against using teflon tape for the body screws, just throw some loctite/permatex blue on them instead. teflon tends to put alot of tension as opposed to traditional loctite and those small screws are already fragile enough. also if you don't want to mess with the zen pin screws u can remove all the screws and ur tolerances should still be perfect, the body screws and pivots clamp down on the scales, liners, spacers enough that they wont move around even without the zen screws.
@CrowFlips20 күн бұрын
The fact that the anos aren’t the same show that it’s actually hand done which is a plus for me
@ejgplays194921 күн бұрын
my AS nautlius ive had for about 3 or more months and its still got no tap like nearly no play havent touched it at all tuning wise ive just tightened the screws whenever it got a slight tap. its been dropped a hundred times on wooden floor and some times on the ground. its held up hella nice idk if i won the jackpot or not
@hellojuggalos21 күн бұрын
hey i hope your naut keeps that same energy
@NotD0ggyVR21 күн бұрын
Woooow your so good I can’t do any combos but I’m just trying to learn and keep up the good work😊
@hellojuggalos21 күн бұрын
it won't take long to catch up to me i promise, they are just a few very simple tricks flowed together. You got this
@brainstormwonderz970621 күн бұрын
Based
@P0shPirate23 күн бұрын
Any glow spacers or black light reactive ones? Or like led end caps?
@hellojuggalos23 күн бұрын
i now also want to know this
@EbolaWantsAhug19 күн бұрын
The only ones I'm aware of are the zippy spacers but they don't work on the AS Reps sadly. Theone or Baliplus Reps should be fine though
@hellojuggalos19 күн бұрын
@@EbolaWantsAhug wait so b+ and AS rep parts are not interchangeable? the cf spacers in this one is advertised to work on both. I don't doubt what you say i just wonder why zippy spacers wouldn't work.
@EbolaWantsAhug19 күн бұрын
@@hellojuggalos I just measured it and the b+ barrels are about 0.33mm bigger then the AS barrels so no they aren't interchangable sadly. I'm not exactly sure why the zippy spacers don't work but they didn't line up properly and I've got b+ Rep coming in about the next 2 weeks or so so I'll actually be able to check if they work on that. Might have been that I went with the stock extensions instead of the stock spacers with no extension but I don't know if that would have made a difference or not
@gubsome12 күн бұрын
@@EbolaWantsAhugyes they do i have a as rep and i ordered half length spacer extensions and they work perfectly
@peterhenzsel36124 күн бұрын
I actually made a mistake of over tightening a zen pin screw... I had to wait for a friend to get a rep so I would have a spare zen pin... My rep can function without screws I guess
@hellojuggalos24 күн бұрын
lol figures doesn't it. Kolisong is hooking me up with some spare hardware since i already burned through my 3 spare spacer screws.
@peterhenzsel36123 күн бұрын
I dont get lucky with bushing either. So I had to tune 4 krakens, 3 reps (1 wasnt good at the end), 2 nauts (1 wasnt that good), 1 tsunami, 1 squidtrainer and 1 cygnus clone.
@peterhenzsel36123 күн бұрын
My rep's bushing is literaly stuck on the pivot so I cant tune it further. At least its tune is perfect
@Something2Nothing_brd24 күн бұрын
Be careful
@Balizilla24 күн бұрын
I’ve always wanted a Replicant but the 30 screws and all the tinkering I’ve seen other people do with these things turned me off so I just ordered a Orion V1.5 instead. Lol, already have a few AS Krakens.
@hellojuggalos24 күн бұрын
yea and unlike the krakens you can't get away with just not tinkering with it.
@cylerthetreator211625 күн бұрын
Is that a zippy or did you customize it?
@hellojuggalos25 күн бұрын
yea those are zippy inserts
@rachelwashington342425 күн бұрын
Cool dude
@TristanMonette1925 күн бұрын
Life lesson, don’t kill yourself
@Tosku9v25 күн бұрын
Чел харош
@EbolaWantsAhug25 күн бұрын
I absolutely love my AS Rep and threw some CF Spacers with brass weights which is actually slightly heavier than the stock titanium spacers. AS always has amazing tolerances unless once in a blue moon they do have some bad tolerances but I've never had to tune the bushings they were fine. It does tap when you drop it but you should need to just off the handles that's tapping and put everything back in place but usually just backing out the screw and holding the handles together tight and getting as much force as I can on that screw to get it back in and it fixes my problem. Also you can use Vulp bushings if you want to try and tune one since they don't give you spares(for me at least). I'm probably gonna end up getting another one if they're back in stock with white g10 so I can try and dye it. By the way watch out for the nipple on there it hurts like a bitch to get pinched by and it's pretty easy to get yourself if you're going fast.
@hellojuggalos25 күн бұрын
you can put weights in it? i had no idea. Thanks for the other tips also.
@Something2Nothing_brd26 күн бұрын
😮
@Something2Nothing_brd26 күн бұрын
😮
@Clippzz2126 күн бұрын
Yo I just found this channel and my name is Chaz and I LOVE BALISONGS
@khanhtruong329426 күн бұрын
W
@SquidMissle26 күн бұрын
being able to tell what side it is at a glance is fuckin brilliant
@GhostFlipping26 күн бұрын
Wow it looks amazing
@peterhenzsel36126 күн бұрын
Mmmm the cinematography... Lmao
@hellojuggalos26 күн бұрын
only top tier production from me
@khanhtruong329426 күн бұрын
W
@Something2Nothing_brd27 күн бұрын
That was clean
@Something2Nothing_brd27 күн бұрын
Hey I am a supporter and I do a lot of butterfly/balisong tricks to. 😊 So my question is do u want to (collab) with me or anything else I would be happy if you give me a answer so have a good day man👍🏻
@hellojuggalos26 күн бұрын
lol while i thank you for such an offer i'm nowhere near skilled enough to be worth collabing with. Nor am i a good videographer or editor. Plus i'm lazy and very surprised this little clip blew up. Thanks again for the offer though!
@Something2Nothing_brd26 күн бұрын
@hellojuggalosok I understand 👍🏻 That's no problem and I have a question... I like your vids and ur Technik it's not that bad and it's not to god its the perfekt Technik.( My opinion) so my question is do u want to match or have (contact <Idk What this word is) I'm {german)} and ya that is al I got to say so have a god day and yes👋
@CrowFlips27 күн бұрын
Having 9 balisongs as a newbie is crazy. I’ve been flipped for 2 years and I only have 2. I can do the chadder 💀
@ReverseFlipping27 күн бұрын
so i touched myself...
@JonsBalisongBlunders27 күн бұрын
Hey dude this was served in my home feed, nice work 🤘