Not a hrs job and it's a simple repair and can be done yourself for just the price of the part in under an hour!
@NightWolf-vv5me16 күн бұрын
What kind of camera do you have?
@MDPvideo115 күн бұрын
Go pro 10
@NightWolf-vv5me15 күн бұрын
@MDPvideo1 I'm about to try the PODS account. Looks worthwhile.
@ilhommuminov70817 күн бұрын
Mine is Freight shitter 2017 I had problem with split pin bushing on 2020 they did changed it with new clutch and couple more parts for about 10k it was fine till now but now every time when I drop off my trailer unhooked my air bags raise up alloway and air starts leaking from air leveling valve and it’s takes about 3,5 min to get back to normal then I’m able to drive but this exactly problem that you mentioned it’s happened to me but it was acting like this after every drop off trailer I believe bc of the air and mine wasn’t go to D but reversed is R goes smoothly when I start put it on D it’s act like grinding and noice coming underneath of transmission then what I do is turn it off the engine wait couple min pray start back and it’s back to normal I’m really confused with this ps of shitt truck I used to drive Volvo never had any kind of problem but this problem I had is very severe and to expensive to repair!
@MDPvideo117 күн бұрын
@ilhommuminov708 sorry to hear this. It's extremely frustrating because you paid all this money only for the problem to happen again later. If the dealer tells you 10k to fix ask about a new transmission because it's a faster repair (2-3 days) then to get it fix which will take up to 3 weeks.
@ilhommuminov70817 күн бұрын
@@MDPvideo1 yeh but I didn’t expect it to have another problem for transmission issues one of my friend also had same issue as yours got stocked at TN towed to the shop he found some used transmission on Facebook with used engine cost him about 22k with low mileage on them but it was way back when the rates was good but unfortunately now its not worth it to do so big job
@MDPvideo117 күн бұрын
@@ilhommuminov708 yea the rates are still low. Definitely have to be careful throwing money around unless it's really worth it.
@jtaylor344721 күн бұрын
Just subscribed just had this issue
@KV8Trucking23 күн бұрын
Wow haven’t been there in 4yrs. Used to haul pods for NFI
@MDPvideo123 күн бұрын
@KV8Trucking yea it's been dry over there for the past 3 years....no money smh
@KV8Trucking23 күн бұрын
@@MDPvideo1 wow! The headquarters it’s in Tampa/clearwater FL. Try to reach out to them and get the load straight from them.
@MDPvideo123 күн бұрын
@KV8Trucking I moved on pulling hazmat know...plus there rate went down
@KV8Trucking23 күн бұрын
@@MDPvideo1 o okay. Nice bro. Be safe out there.
@harikashamsher29 күн бұрын
I replaced the turbo, air condenser, issue still not fixed. Same Code came back up
@MDPvideo127 күн бұрын
Sorry that you're going through it, not a mechanic but did you delete your DEF SYSTEM? If so you might get different results.
@MDPvideo127 күн бұрын
Also you have to use dealer parts not second hand or reman parts
@lupitas.594Ай бұрын
Thanks 🇲🇽🚛🇱🇷🙏🥰
@michaelwalker9968Ай бұрын
Over head valve adjustment will do the trick. Not the cylinder head
@MDPvideo1Ай бұрын
@michaelwalker9968 at the time I never had a over head valve adjustment the 6 years of owning the truck too much damage was already done. Moving forward once every year I'll get one.
@housnihousni5927Ай бұрын
How much did it cost
@MDPvideo1Ай бұрын
$16,000 that's labor and parts
@ilhommuminov70827 күн бұрын
Wsg bro where did you buy it from ?
@MDPvideo127 күн бұрын
@ilhommuminov708 campbell freightliner south brunswick nj
@ilhommuminov70826 күн бұрын
@@MDPvideo1 cool thanks bro 🙏
@jefferyholcomb8348Ай бұрын
Driver I have a question. I was driving and a check engine light came on. I looked up the code on the dash it said 677-5.I drove for 2 days without shutting truck off. I delivered load then went to truck stop in Denver and accidentally turned truck off and now it won’t start.Im getting almost no power to the ignition switch. I put light tester on it and it’s super dim. I had a road side mechanic come out and he thinks it’s the thing you changed. How did you know yours was bad?Thanks
@MDPvideo1Ай бұрын
@jefferyholcomb8348 for my situation the kill switch and the pndb which is like a fuse box, was given me signs it was getting ready to go out. The light would be dim for a moment then fully light up. I looked up the part and started there. You can start there and also check all the fuses and the kill switch it's self. Check battery connection as well and make sure there are no corrosion eating up the wires or wire harness. Hope this helps
@MDPvideo1Ай бұрын
@@jefferyholcomb8348 also check any wires and connectors around the starter
@RichtacoАй бұрын
Overhead adjustment or over haul ?
@MDPvideo1Ай бұрын
I did an overhaul on the top. Let your mechanic or dealer diagnose the truck to see if you need which one
@RichtacoАй бұрын
@@MDPvideo1 I’ve learned the hard way they are not always right. In fact mechanics have almost ruined me more than once. I’ll trust my gut and keep on trucking.
@KeepGoingTransportАй бұрын
How many miles did you have on your one box?
@MDPvideo1Ай бұрын
Around 900,000 miles
@jossa9422 ай бұрын
Damn bout too do same job 😂 damn dd15
@MDPvideo12 ай бұрын
This is a light one trust me. There are bigger breakdowns
@Titus_Gunter2 ай бұрын
The DEF doser valve was unplugged
@MDPvideo1Ай бұрын
before and after... good luck with your one box
@Christian-hn7ty2 ай бұрын
What's your rate and what lanes do you cover
@johnaustin60672 ай бұрын
John Mansville to Johns Manville Mandella Efect! Yeah!😂
@king_josh64143 ай бұрын
I did a reset and the issue was resolved on my truck. Just turn the battery off for about 15 minutes. You should be good. Stay safe out there
@Armannortheast3 ай бұрын
Let me cleaner you and make you smart. Don’t wast your money on maintenance. It cost you a lot of expensive.. if you have this code spn 4364 fmi 18. Just just keep your nox outlet sensor out. You have check ligh on. But it’s work great. If that doesn’t work. Just go buy one box new not ramanufacture. It’s cheap only $6500 all sensor. $1500. Check my video I I hack my system 😂. It’s better then spend every day money. You will be good until 400000 miles
@MDPvideo1Ай бұрын
I was over 900,000 miles it was over due
@kudaibergeniskakov176916 күн бұрын
Салам не понял братан как ты что сделал ?
@jerometaylor5543 ай бұрын
You must have the old style 1 box. 10k dang.
@williammichels10913 ай бұрын
Thank you sooooo much for this video!! Saved the day for me!! 👍🏼
@Armannortheast3 ай бұрын
Men I getting same code. I will diagnose. Let’s see how I can be success without mechanic without anyone just from KZfaq.
@MDPvideo13 ай бұрын
Not good...don't book a load with this one. Regen twice that might make the check engine light go away if your empty go straight to the shop this code will make you derate to 5 mph.
@MDPvideo13 ай бұрын
Call shop ahead and see if they got a one box in stock if that's the option you're willing to go
@dontemcateer53143 ай бұрын
Will this have your truck in derate?
@MDPvideo13 ай бұрын
No, but eventually, it will if you prolong the repair. Maybe after 300 to 400 miles. Hopefully you can still making it home to your mechanic so get empty because it might be a day or two type job at the dealership
@dontemcateer53143 ай бұрын
@@MDPvideo1 appreciate have same the code and truck is losing power
@truckingwithcliff3 ай бұрын
That $200 per hr labor the stealerships charge is ridiculous
@MDPvideo13 ай бұрын
And it's only going up smh
@truckingwithcliff3 ай бұрын
@MDPvideo1 yea I've seen rates at freightliner dealerships pushing 225 an hr, the thieves will drag their asses to diagnose a problem because the book gives hrs of labor on a job. I take my shit to private shops most are 100-165 an hr
@tyronet743 ай бұрын
Driver my advice to you is learn to do your own work, also look for a reliable mechanic plus let KZfaq be your best friend when working on your own truck.
@MDPvideo13 ай бұрын
I've gone through so many mechanics that put me in a bind. I just deal with the dealership or the ta shop. But the search continues.
@kechumgreen88933 ай бұрын
your advice is spot on. with KZfaq, you can save tons of money. the same is true for just about everything that needs fixing. it could be fixing a leak in your house or replacing a fitting or hose (tubing) on your air bags. some of the work probably had to be done at a shop. i don't know if the shock change was necessary but it's not too terribly hard to do.
@unite4peace883 ай бұрын
bought my whole car for $6000.00…Wow!
@Bigeddyb3 ай бұрын
I’m sure you could have save on labor but you have piece of mind
@MDPvideo13 ай бұрын
Definitely at a shop but not at the dealer. I Tell guys all the time learn from me and save as much as you can on labor
@TheDriller1003 ай бұрын
lol keep taking your truck to the worthless useless dealer 😂😂😂😂.. some people have no business being an owner operator.. ..
@tyronet743 ай бұрын
Well driver he might be new or a rookie and didn't know better but it is wise to learn the hard way then you realize the dealerships are full of ##$# and that when you look elsewhere.
@MDPvideo13 ай бұрын
I've been in business for six years. I'm doing something right lol. Not everybody can afford the dealership in the beginning. I can but my videos helps my friends and anybody looking for help with pricing. How many people did you help. I should the wins and the loses. Your delusional if you think your gonna be a truck owner and not spend money.
@MDPvideo13 ай бұрын
What if your 1,000 miles from your mechanic. What are you going to do fly your mechanic out smh come on
@thomaswilson86343 ай бұрын
I just retired after 44 years in the trucking industry. I have a lot of knowledge when it comes to equipment. Doing pm every 20k miles and grease job every 5 to 6 k especially fifthwheel . I always tell guys if you listen to others bad problems and gather info on mileage and age it happens you will have a fair idea of time frame to replace said components. I always had a list when I went to dealership on every truck I owned. I was never left on side of the road. As a matter of fact my Kenworth I retired with was so well maintained that I decided to convert to a HDT RV HAULER to pull my 43ft drv mobile suites camper. I will say this I've watched a lot of guys on you tube with freightliners go broke chasing emissions problems. And exploding fuel pumps. Wiring harness. They just aren't like the old ones for sure. I had wonderful luck with my Kenworth. I wish you the best and stay safe out there trailer trucking
@MDPvideo13 ай бұрын
Thx
@MDPvideo13 ай бұрын
I kinda over do it by changing my full synthetic oil every 15k
@merlinmonson21333 ай бұрын
I would never own a new truck. An older truck that you can work on yourself is the only way to go.
@MDPvideo13 ай бұрын
For some truck owners, the maintenance on the old truck cost just as much or more than the new truck because you have to add in all the down time. Plus you might get better fuel mileage with a new truck
@billtodd65093 ай бұрын
Young man, that sensor takes no more than 1/2 hr to change out. Also, they charged you for oil change and also charged you to drop pan and replace the oil again. Sounds like they should be exposed publicly and have to show you why they charged you for a double oil change. I just hate it when these jerks do this to a hard working owner trying to do the right thing.
@MDPvideo13 ай бұрын
Most freightliner dealers will charge you for the full hour even if it takes them 15 minutes. Sometimes, you'll be at the mercy of the dealership when it comes to certain things.
@faysal12003 ай бұрын
2015 Cascadia Cummins engine. Got the same code SPN 102 fmi 18. Went to the dealer, they found my air filter really dirty and one of my clamps was loose leaking air. Left shop all good. Next day under a heavy load and the code came back.
@MDPvideo13 ай бұрын
2015 cascadia yea that truck has been working for some time now. Just try to save money on the repair as far as labor. I like to go with dealer factory parts so be careful with generic brands I don't recommend because the warranty might give you an issue.
@faysal12003 ай бұрын
Went back to the dealer. They found my DPF filter cracked and breaking apart. Got new filters, they cleared all coded, did a forced regen and let me go. 50 miles down the road check engine light came back on spn 102 fmi 18. Turned around waiting for them to open in the morning. When they were inspecting it before they found the broken filter, they wrote down “verified turbo spins freely” I don’t know but I will find out what comes up tomorrow.
@lavondixon72953 ай бұрын
Blessings! Good luck out there.
@MDPvideo13 ай бұрын
Thx
@Antonio-ti2he3 ай бұрын
Thank you for sharing. How many miles on your tractor? Like to know when someone should expect these type of bills. Thank you.
@MDPvideo13 ай бұрын
970,000 miles
@ivandraco53284 ай бұрын
Dang bro you’re a unit, im looking to get into flatbedding so this gave me some inspiration
@TheArtOfObservingPeople4 ай бұрын
U did it at the dealership or mom and pop and which dealership if u don’t mind I may need one inthe future
@MDPvideo14 ай бұрын
Dealership
@dimapagu83614 ай бұрын
Thanks bro!
@Troy-zu3gn4 ай бұрын
What's up I'm company driver pulling flatbed what agents are around Maryland how are there rates out of Maryland area. How are rates on admiral load board compared to truck stop or dat peace.
@Antonio-ti2he5 ай бұрын
New subscriber, like your content. Were you able to get your weight down ?
@Antonio-ti2he5 ай бұрын
I notice you do not use the rolls on the side of the trailer to hold the traps. Is it to keep the straps dry?
@MDPvideo15 ай бұрын
So drivers won't steal them
@Antonio-ti2he5 ай бұрын
@@MDPvideo1 It saddens me to hear that but I understand. Thank you. God bless.
@Unduplicatable6 ай бұрын
Man don't go by gps that's a fatal flaw! You want to learn how to calculate based on average speed depending on distance, cities traveled through, etc. Apple and Google Maps will give you time based on driving a car, not a truck. I rely on it when I know it's accurate, but usually it's a bit low of an estimate on time.
@xl_shots_39706 ай бұрын
What was your truck doing for you to replace that part? I may need to replace mine
@MDPvideo13 ай бұрын
Check you cpc. The wouldn't accelerate. Couldn't drive nowhere
@toreyross19747 ай бұрын
Just had the same thing happen to me. Same code also around the same mileage. Now that you got the work done. Was it worth getting the overhaul?
@toreyross19747 ай бұрын
Or do you wish you should have gotten a new truck?
@MDPvideo17 ай бұрын
It would have been worth it if it was just this problem, but more problems came up. Started at $14,000, and I ended up spending over $30k. One box is going to give out, bottom of the engine gonna go. But the loads out are garbage probably be harder out here with a truck note. It has to be a good deal to switch out for a newer truck. Hopefully brand new in your case. Good luck with everything and hopefully you can get it done for less.
@toreyross19747 ай бұрын
@MDPvideo1 did the one box and bottom go out due to the overhaul?
@MDPvideo17 ай бұрын
@toreyross1974 No, it was just time. It happen two weeks a part. I wouldn't go to far away from home or a shop until then just in case you have to get your truck worked on because a tow bill will hurt.
@joycharles10557 ай бұрын
I do 40s and you look bigger then me you should up the weight
@MDPvideo17 ай бұрын
Focus on your form. Heavy doesn't always mean better. Plus, I've been probably doing it longer. Put some time in and you could easily surpass me. Add pull-ups it helps
@user-ez9yt9dz4h7 ай бұрын
Thank you Bro. Just subscribed as well!
@vfpaintjobs7 ай бұрын
What was it doing
@MDPvideo17 ай бұрын
Wouldn't accelerate...I would press down and the truck would just idel
@Al_Rod8 ай бұрын
Hey, buddy, you're doing a great job. What board is that PA-MA load from, AMMF in-house? This kind of rates are hard to find at DAT nowadays. :(
@MDPvideo18 ай бұрын
Landstar load board...loads like this pop up once in a blue...nothing really consistent right now
@Al_Rod8 ай бұрын
@@MDPvideo1 Thanks man.
@robertmorehouse24218 ай бұрын
If this happens turn off your batteries and try it agin. Worked for me
@BornYooper8 ай бұрын
One of the reasons I like my local hazmat tanker job. M-F 11-13 hours a day with OT after 40.
@MDPvideo18 ай бұрын
Some guys are even getting a salary. Differently stable 👍
@warriorblue638 ай бұрын
Look rookie, don’t ever deal with brokers, find direct shipper loads, set up your own contract. If you’re a lease operator become a true owner operator with your owner authority and search out and negotiate your own loads.
@MDPvideo18 ай бұрын
Let's be real for a second most but not all shippers won't negotiate or give you a contract unless you have multiple trucks to guarantee there freight will be moved especially going to jobsites with other people on the clock. Another factor is getting hazmat insurance when freight is already slow, not a wise idea. Maybe if I was pulling out of one spot every day or pulling dry van, but I'm hauling flatbed and competition is high. Big fish eat little fish, unfortunately
@adamfischer27358 ай бұрын
I can tell you are a newbie crying. Don't worry about it, it will happen again and again. Use to take up my entire day hauling steal... Good money
@MDPvideo18 ай бұрын
Oh trust me this is not the first time lol. But some brokers will throw you more than $100 for the whole day. We share the same struggle. I guess I didn't mind when there was more money out here.