Quite allot of Zetors in India 🇮🇳, is yours reliable?

@@RedShedProjectsScotland yes it is very powerful, engine is changed to di

Hi Kevin, not managed to post new videos much as no internet at our new building site just yet but hope to get back at them soon. I ordered them from ATP motorz in Chech Republic you will find them on google. I have a manual I could look up the part numbers if you needed.

@@RedShedProjectsScotland Hi thanks for your reply! If you could get the part number it would be a great help as I have looked and can’t find them. Thanks 👍🏻

@@RedShedProjectsScotland Hi thanks for your reply! If you could get the part number it would be a great help as I have looked and can’t find them. Thanks 👍🏻

They are quite cool 😎

@@RedShedProjectsScotland of course it did 💯 nice done mate

Thanks for the appreciation! The Zetor has been quite busy lately and we use it most days, we are getting ready to build a new house! I will update the channel soon on things I’ve been working on.

£1500 for the tractor 🚜 and roughly £1200 for parts and paint 👍🏻

If you were meaning for this repair then less than £100

It’s been working away at our new building site il try get a video of it working in our small field soon 👍🏻

Yes there is, please remember I’m not an expert when following my advice.

Recently changed dirty filter due to lift arms dropping under load and jumping . Online research suggested o-rings in hydraulic distributor may be a good place to start

I can’t find the link sorry

That’s what I done, took everything apart and replaced the O rings

kzfaq.info/get/bejne/oMeJbMiim6eXhWg.html

Brakes are fairly good since we done this job I have not really worked them that hard to overheat.

What would you like to know?

Sadly gone now and replaced with a Renault 🤦🏻‍♂️

She lives in north wales now 🤙🏼

Thanks Paul il have a look 👍🏻

Hi Frank, We did end up loosening it up some more, it was all trial and error I’d never attempted this kinda job in the past. Fairly familiar with the workings of it now though.

We ended up having to bend it up slightly using the forklift, rough but it definitely helped so be gentle following my advice 😂👍🏻.

@@RedShedProjectsScotland 😂🤣👍

Great tractors, Very simple to work on, I used it all summer this year with no problems at all. Have a Massey 135 coming very soon which belonged to my late Father.

We only changed the seals were the splined shaft goes in, this job was the first I’ve ever worked on a tractor. Are you doing something similar?

@@RedShedProjectsScotland I am aye, Have brakes and clutch done ,. Getting crankshaft done at the moment Have new panels for it , Was one of the zetor s of the farm, was bought second hand 1988, A slow moving project , How many litres of paint did it take to spray yours ,

@@thomasmclaughlin2206I didn’t get the chance to enhance mine much further as we bought site to build a new house and it’s been working all summer. Hopefully after the house is finished il get a decent shed put up and il finish it probably. I bought 5 litres of Red and 2 litres of beige colour and had loads left over.

@@RedShedProjectsScotland Ok that not to much paint , any left over will do the 6718, I seen in a video you were thinking of putting on zetor cab , you would need a 6911 cab to fit that tractor because of the diesel tank , And you would need new clutch and brake pedals ,

@@thomasmclaughlin2206 I ment to refit the Duncan cab it came with its in quite tidy condition, although I like being able to just hop on and off without the cab. Probably only really use it in the better weather it’s currently under cover for winter, if I get time tomorrow I may do an update on what I’ve been up to with the new place.

They came off a vw T5! unsure what they may have came off originally.

We are based in Aberdeenshire Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

I know Barry I try not to show my face in public due to the embarrassment 😉 thanks for watching 👍

Thanks buddy 👍🏻

6711 is what this Zetor is 👍🏻

Approx £4000 not including our own labour of a few hundred hours

Few lads have a scania light that shines on the ground once opened, quite a nice touch 👌🏻

Thank you Mark, it’s beautiful driving around Scotland especially up north. @truckertim will be able to get some pointers for his build.

@@RedShedProjectsScotland he needs all the help he can get with that one he's got doesn't he pal

@@marknewell7355 definitely, and he has another now! Must have very deep pockets.

@@RedShedProjectsScotland definitely think he's alot of sponsorship in the back ground especially the two shops he's always at massive free advertising for them

Thanks Lewis, I’ve let this one go and it’s now back on the road pulling fridge vans around Scotland i see it on the road quite regularly, Probably do another one in the future 👍🏻

This video was taken by my brother, I will have a chat with him and see how he went about the job, I shall get back to you 👍🏻

Silly question, but is the PTO lever engaged? If it isn't engaged (shifted to the aft position) then the hydraulic pump isn't powered. If it is engaged and you can hear it running, then you likely have a problem with the valves in the lift cover.

Cheers Matty lad, long road ahead of us but it will all be worth it surely 😂

Thanks Paul, be worth the upheaval when we are done.

It’s a great little tractor 🚜

Lovely getting a chat with you yesterday and thanks for subscribing to our channel, the Back Hoe will feature on the channel next week so you definitely have not seen the last of it.

If the money is right 😁

Il have an update on it next week more or less finished now 👍🏻

I’m with you on that Conor 👌🏻

@@RedShedProjectsScotland what spec paint is that, I’m currently restoring a 2511?

@@connorbirrane3875 We used tractol paint Which I got of EBay it washstand hugely expensive